Kategoriler
BLOWER COMBUSTION FAN
Fasco - 70625068

BLOWER COMBUSTION FAN
BLOWER 220V 10POLE
Ziehl Abegg - Gr35c-Zid.Dc.Cr

BLOWER 220V 10POLE
axial fan 400V 50Hz 3Ph 890/700 rpm 2.79/1.36kW 3hp . (3.6/2.5kW el.) 7.2/4.3A LR suction IP54 THCL F This fan meets the efficiency requirements of the 2009/125/EG directive (ErP regulation).
Ziehl Abegg - FC091-SDS.7Q.V7

axial fan 400V 50Hz 3Ph 890/700 rpm 2.79/1.36kW 3hp . (3.6/2.5kW el.) 7.2/4.3A LR suction IP54 THCL F This fan meets the efficiency requirements of the 2009/125/EG directive (ErP regulation).
Axial fan with sickled blades and square wall ring plate. Type:FN080-SDQ.6N.V7 3~ 400V D/Y 50Hz P1 1.80/1.15kW 3.9/2.2A DI=5% 900/700/MIN COZY 0.68 65°C IP54 THCL 155 ErP compliant 2015 N=41.5 statA=36.8% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special
Ziehl Abegg - 138292

Axial fan with sickled blades and square wall ring plate. Type:FN080-SDQ.6N.V7 3~ 400V D/Y 50Hz P1 1.80/1.15kW 3.9/2.2A DI=5% 900/700/MIN COZY 0.68 65°C IP54 THCL 155 ErP compliant 2015 N=41.5 statA=36.8% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special

Axial fan with sickled blades and short nozzle wire support grid (cold). Type:FN050-VDK.4I.V7P1 3~ 400V ±10% D/Y 50Hz P1 0.77/0.49kW 1.7/0.84A DI=0% 1300/1025/MIN COZY 0.64 70°C 3~ 400V ±10% D/Y 60Hz P1 1.10/0.60kW 1.9/1.0A DI=0% 1400/980/MIN COZY 0.81 70°C 3~ 460V ±10% D/Y 60Hz P1 1.20/0.70kW 2.0/1.05A DI=0% 1480/1100/MIN COZY 0.76 70°C IP54 THCL 155 ErP compliant 2015 N=40.7 statA=33.4% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum wings. Fan 1-layer paint finish RAL 9005 (jet black) in resistance class 1 (L-TI-0596) ring grid
Ziehl Abegg - 156916

Axial fan with sickled blades and short nozzle wire support grid (cold). Type:FN050-VDK.4I.V7P1 3~ 400V ±10% D/Y 50Hz P1 0.77/0.49kW 1.7/0.84A DI=0% 1300/1025/MIN COZY 0.64 70°C 3~ 400V ±10% D/Y 60Hz P1 1.10/0.60kW 1.9/1.0A DI=0% 1400/980/MIN COZY 0.81 70°C 3~ 460V ±10% D/Y 60Hz P1 1.20/0.70kW 2.0/1.05A DI=0% 1480/1100/MIN COZY 0.76 70°C IP54 THCL 155 ErP compliant 2015 N=40.7 statA=33.4% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum wings. Fan 1-layer paint finish RAL 9005 (jet black) in resistance class 1 (L-TI-0596) ring grid
Axial fan with sickled blades and protective basket. 140471 3~ 400V ±10% D/Y 50Hz P1 0,84/0,54kW 1,45/0,96A DI=15% 1340/940/MIN COSY 0,80 70°C IP54 THCL 155 ErP compliant 2015 N=41.3 statA=34.2% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum wings. Stator unpainted Rotor unpainted Wings unpainted Motor mount powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). ring grid
Ziehl Abegg - FN050-VDS.4I.V7P1

Axial fan with sickled blades and protective basket. 140471 3~ 400V ±10% D/Y 50Hz P1 0,84/0,54kW 1,45/0,96A DI=15% 1340/940/MIN COSY 0,80 70°C IP54 THCL 155 ErP compliant 2015 N=41.3 statA=34.2% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum wings. Stator unpainted Rotor unpainted Wings unpainted Motor mount powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). ring grid
Axial fan with die-cast blades and protective cage. Type:FC091-SDS.7Q.V7 3~ 400V ±10% D/Y 50Hz P1 3.60/2.50kW 7.2/4.3A DI=5% 890/700/MIN COZY 0.72 60°C IP54 THCL 155 ErP compliant 2015 N=41.2 statA=38.3% Terminal box K07 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum wings. Fan 1-layer paint finish RAL 9005 (jet black) in resistance class 1 (L-TI-0596)
Ziehl Abegg - FC091-SDS.7Q.V7 (209589)

Axial fan with die-cast blades and protective cage. Type:FC091-SDS.7Q.V7 3~ 400V ±10% D/Y 50Hz P1 3.60/2.50kW 7.2/4.3A DI=5% 890/700/MIN COZY 0.72 60°C IP54 THCL 155 ErP compliant 2015 N=41.2 statA=38.3% Terminal box K07 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum wings. Fan 1-layer paint finish RAL 9005 (jet black) in resistance class 1 (L-TI-0596)
Axial fan with die-cast blades and square wall ring plate 3~ 230/400V ±10% D/Y 50Hz P1 1.25kW 3.8/2.2A DI=10% 1300/MIN COZY 0.82 60°C IP54 THCL 155 ErP compliant 2015 N=40.4 statA=34.6% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-106XB Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing. Aluminum wings. Fan 1-layer paint finish RAL 9005 (jet black) in resistance class 1 (L-TI-0596)
Ziehl Abegg - Type:FC056-4DQ.6F.A7

Axial fan with die-cast blades and square wall ring plate 3~ 230/400V ±10% D/Y 50Hz P1 1.25kW 3.8/2.2A DI=10% 1300/MIN COZY 0.82 60°C IP54 THCL 155 ErP compliant 2015 N=40.4 statA=34.6% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-106XB Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing. Aluminum wings. Fan 1-layer paint finish RAL 9005 (jet black) in resistance class 1 (L-TI-0596)
Artikelnummer: 138756 Axial fan with sickled blades and protective basket. Type:FN080-SDS.6N.V7 3~ 400V D/Y 50Hz P1 1.80/1.15kW 3.9/2.2A DI=5% 900/700/MIN COZY 0.68 65°C IP54 THCL 155 ErP compliant 2015 N=41.5 statA=36.8% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum wings. Stator unpainted Rotor unpainted Wings unpainted Motor mount powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). mesh grid All fasteners made of stainless steel.
Ziehl Abegg - FN080-SDS.6N.V7

Artikelnummer: 138756 Axial fan with sickled blades and protective basket. Type:FN080-SDS.6N.V7 3~ 400V D/Y 50Hz P1 1.80/1.15kW 3.9/2.2A DI=5% 900/700/MIN COZY 0.68 65°C IP54 THCL 155 ErP compliant 2015 N=41.5 statA=36.8% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum wings. Stator unpainted Rotor unpainted Wings unpainted Motor mount powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). mesh grid All fasteners made of stainless steel.
Artikelnummer: 116444 Single-flow motor fan wheel with backward-curved blades ECblue Type: RH28M-ZIK.DC.1R MK116-0009 UL Listed Product E213826 ZB-155 3~ 380-480V 50/60Hz P1 0.96kW 1.65-1.3A 3400/MIN 60°C IP55 THCL 155 IE5 ErP compliant 2015 N=65.8 statA=55.1% VSD integrated Integrated controller ECblue BASIC MODBUS Connection plan: AP00001C ECblue BASIC-MODBUS Rating plate: 1x fixed. Data matrix code 1x loose in the controller Notice sign : 1x fixed Installation position H/Vu/Vo. Motor protection: integrated active temperature management Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -35 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Humidity/tropical protection. Balancing quality G 6.3 Stator unpainted Rotor 1-layer painting RAL 5002 (ultramarine blue) in resistance class 1 (L-TI-0596). Aluminum impeller, unpainted Stainless steel fasteners. Ball bearings with long-term greasing.
Ziehl Abegg - RH28M-ZIK.DC.1R

Artikelnummer: 116444 Single-flow motor fan wheel with backward-curved blades ECblue Type: RH28M-ZIK.DC.1R MK116-0009 UL Listed Product E213826 ZB-155 3~ 380-480V 50/60Hz P1 0.96kW 1.65-1.3A 3400/MIN 60°C IP55 THCL 155 IE5 ErP compliant 2015 N=65.8 statA=55.1% VSD integrated Integrated controller ECblue BASIC MODBUS Connection plan: AP00001C ECblue BASIC-MODBUS Rating plate: 1x fixed. Data matrix code 1x loose in the controller Notice sign : 1x fixed Installation position H/Vu/Vo. Motor protection: integrated active temperature management Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -35 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Humidity/tropical protection. Balancing quality G 6.3 Stator unpainted Rotor 1-layer painting RAL 5002 (ultramarine blue) in resistance class 1 (L-TI-0596). Aluminum impeller, unpainted Stainless steel fasteners. Ball bearings with long-term greasing.
Artikelnumber: 111955 Single phase AC motor. 1~ 230V ±10% 50Hz P1 40W 0.17A 2450/MIN 1UF/400V 1~ 230V ±10% 60Hz P1 50W 0.22A 2500/MIN 1UF/400V IP10 thermal class 105 Fixed capacitor QR06A-2EM.38.AB Connection via Europe terminal strip, operating capacitor set up and connected Rating plate: 1x fixed Signs: 1x each fixed Installation position H Thermostat switch connected in the winding, clockwise rotation Humidity/tropical protection. Protective grille on the suction side, supplied loose Front grille and filter supplied loose Filters supplied loose Motor bearing with standard greasing Counter bearing with cold greasing Aluminum impeller Motor mounting side A (clockwise rotation) www.ziehl-abegg.com/erp-ab.pdf (E)
Ziehl Abegg - QR06A-2EM.38.AB

Artikelnumber: 111955 Single phase AC motor. 1~ 230V ±10% 50Hz P1 40W 0.17A 2450/MIN 1UF/400V 1~ 230V ±10% 60Hz P1 50W 0.22A 2500/MIN 1UF/400V IP10 thermal class 105 Fixed capacitor QR06A-2EM.38.AB Connection via Europe terminal strip, operating capacitor set up and connected Rating plate: 1x fixed Signs: 1x each fixed Installation position H Thermostat switch connected in the winding, clockwise rotation Humidity/tropical protection. Protective grille on the suction side, supplied loose Front grille and filter supplied loose Filters supplied loose Motor bearing with standard greasing Counter bearing with cold greasing Aluminum impeller Motor mounting side A (clockwise rotation) www.ziehl-abegg.com/erp-ab.pdf (E)
Article number: 180681 ZAplus axial fan with sickled blades and round wall ring plate. ZAplus Ontop ECblue Type:ZN091-ZIL.GL.V5P1 MK152-0008 UL Listed Product E213826 ZB-155 3~ 380-480V 50/60Hz P1 3.20kW 5.2-4.2A 1100 RPM 55°C IP55, THCL 155 IE5 ECblue BASIC MODBUS ErP compliant 2015 N=65.3 statA=62.0% VSD integrated integrated controller Connection plan: AP00001C ECblue BASIC-MODBUS Rating plate: 2x fixed. Data matrix code 1x loose in the controller Information sign 1x fixed. Installation position H/Vu/Vo. Motor protection: integrated active temperature management Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -35 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum impeller. Stator unpainted Rotor 1-layer paint RAL 5002 (ultramarine blue) in resistance class 1 (L-TI-0596) Wings unpainted Wall ring unpainted black Protective grille powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). ring grid Protective grille on the outlet side supplied loose Fastening parts supplied loose in the accessory bag. Replacement for Item 165010! 2nd generation !
Ziehl Abegg - ZN091-ZIL.GL.V5P1

Article number: 180681 ZAplus axial fan with sickled blades and round wall ring plate. ZAplus Ontop ECblue Type:ZN091-ZIL.GL.V5P1 MK152-0008 UL Listed Product E213826 ZB-155 3~ 380-480V 50/60Hz P1 3.20kW 5.2-4.2A 1100 RPM 55°C IP55, THCL 155 IE5 ECblue BASIC MODBUS ErP compliant 2015 N=65.3 statA=62.0% VSD integrated integrated controller Connection plan: AP00001C ECblue BASIC-MODBUS Rating plate: 2x fixed. Data matrix code 1x loose in the controller Information sign 1x fixed. Installation position H/Vu/Vo. Motor protection: integrated active temperature management Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -35 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum impeller. Stator unpainted Rotor 1-layer paint RAL 5002 (ultramarine blue) in resistance class 1 (L-TI-0596) Wings unpainted Wall ring unpainted black Protective grille powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). ring grid Protective grille on the outlet side supplied loose Fastening parts supplied loose in the accessory bag. Replacement for Item 165010! 2nd generation !