Kategoriler
Ziehl Abegg fan blades 23559 A09004PA27 Wing
Ziehl Abegg - DGZA0605A

Ziehl Abegg fan blades 23559 A09004PA27 Wing
ZAplus axial fan with die-cast blades and square wall ring plate. ZAplus Ontop Type:ZC091-SDQ.7Q.V5 3~ 400V ±10% D/Y 50Hz P1 2.80/1.70kW 5.4/2.9A 840/650/MIN COZY 0.73 70°C 3~ 400V ±10% D/Y 60Hz P1 3.80/1.95kW 6.6/3.4A 890/620/MIN COZY 0.83 60°C 3~ 460V ±10% D/Y 60Hz P1 4.30/2.40kW 6.6/3.6A 950/690/MIN COZY 0.80 60°C IP54 THCL 155 ErP compliant 2015 N=49.2 statA=45.6% Terminal box K07 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum wings. Stator unpainted Rotor unpainted Wings unpainted Wall ring unpainted black Protective grille powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). ring grid Protective grille on the outlet side supplied loose Fastening parts supplied loose in the accessory bag.
Ziehl Abegg - Type:ZC091-SDQ.7Q.V5 / 179572

ZAplus axial fan with die-cast blades and square wall ring plate. ZAplus Ontop Type:ZC091-SDQ.7Q.V5 3~ 400V ±10% D/Y 50Hz P1 2.80/1.70kW 5.4/2.9A 840/650/MIN COZY 0.73 70°C 3~ 400V ±10% D/Y 60Hz P1 3.80/1.95kW 6.6/3.4A 890/620/MIN COZY 0.83 60°C 3~ 460V ±10% D/Y 60Hz P1 4.30/2.40kW 6.6/3.6A 950/690/MIN COZY 0.80 60°C IP54 THCL 155 ErP compliant 2015 N=49.2 statA=45.6% Terminal box K07 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum wings. Stator unpainted Rotor unpainted Wings unpainted Wall ring unpainted black Protective grille powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). ring grid Protective grille on the outlet side supplied loose Fastening parts supplied loose in the accessory bag.
ZAplus axial fan with die-cast blades and square wall ring plate. ZAplus Ontop Type:ZC091-SDQ.7Q.V5 3~ 400V ±10% D/Y 50Hz P1 2.80/1.70kW 5.4/2.9A 840/650/MIN COZY 0.73 70°C 3~ 400V ±10% D/Y 60Hz P1 3.80/1.95kW 6.6/3.4A 890/620/MIN COZY 0.83 60°C 3~ 460V ±10% D/Y 60Hz P1 4.30/2.40kW 6.6/3.6A 950/690/MIN COZY 0.80 60°C IP54 THCL 155 ErP compliant 2015 N=49.2 statA=45.6% Terminal box K07 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing. Aluminum wings. Stator unpainted Rotor unpainted Wings unpainted Wall ring unpainted black Protective grille powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). ring grid Protective grille on the outlet side supplied loose Fastening parts supplied loose in the accessory bag.
Ziehl Abegg - 179572

ZAplus axial fan with die-cast blades and square wall ring plate. ZAplus Ontop Type:ZC091-SDQ.7Q.V5 3~ 400V ±10% D/Y 50Hz P1 2.80/1.70kW 5.4/2.9A 840/650/MIN COZY 0.73 70°C 3~ 400V ±10% D/Y 60Hz P1 3.80/1.95kW 6.6/3.4A 890/620/MIN COZY 0.83 60°C 3~ 460V ±10% D/Y 60Hz P1 4.30/2.40kW 6.6/3.6A 950/690/MIN COZY 0.80 60°C IP54 THCL 155 ErP compliant 2015 N=49.2 statA=45.6% Terminal box K07 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing. Aluminum wings. Stator unpainted Rotor unpainted Wings unpainted Wall ring unpainted black Protective grille powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). ring grid Protective grille on the outlet side supplied loose Fastening parts supplied loose in the accessory bag.
ZAondemand Single-flow motor fan wheel with backward-curved blades Type: RH35M-4EK.2F.1R UL Recognized Component E111399 ZA-155 1~ 230V ±10% 50Hz P1 0.30kW 1.4A 1340/MIN 6uF/400V 1~ 230V ±10% 60Hz P1 0.42kW 1.9A 1450/MIN 6uF/400V IP10 THCL 155 -NOT VOLTAGE ADJUSTABLE ARMK085- 4EK.10.U ErP compliant no Capacitor not included Connection cable on the side, 75cm. Plug wired to the cable, flying Without a circuit diagram Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Conveyor temperature min - 25 degrees Celsius Humidity/tropical protection. Balancing quality G 6.3 Stator unpainted Rotor 1-layer paintwork RAL 7032 (pebble grey) in resistance class 1 (L-TI-0596). Aluminum impeller, unpainted Ball bearings with long-term greasing.
Ziehl Abegg - 130043E

ZAondemand Single-flow motor fan wheel with backward-curved blades Type: RH35M-4EK.2F.1R UL Recognized Component E111399 ZA-155 1~ 230V ±10% 50Hz P1 0.30kW 1.4A 1340/MIN 6uF/400V 1~ 230V ±10% 60Hz P1 0.42kW 1.9A 1450/MIN 6uF/400V IP10 THCL 155 -NOT VOLTAGE ADJUSTABLE ARMK085- 4EK.10.U ErP compliant no Capacitor not included Connection cable on the side, 75cm. Plug wired to the cable, flying Without a circuit diagram Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Conveyor temperature min - 25 degrees Celsius Humidity/tropical protection. Balancing quality G 6.3 Stator unpainted Rotor 1-layer paintwork RAL 7032 (pebble grey) in resistance class 1 (L-TI-0596). Aluminum impeller, unpainted Ball bearings with long-term greasing.
VT01419 Fan 3~ 400V ±10% D/Y 50Hz P1 2.20/1.70kW(1.75/1.2kW 2HP) 4.8/3.0A DI=10% 940/820/MIN COZY 0.65 80°C 3~ 400V ±10% D/Y 60Hz P1 3.30/2.2kW(2.70/1.35kW 4HP) 6.00/3.90A DI=15% 1060/820/MIN COZY 0.80 60°C 3~ 460V ±10%D/Y 60HzP1 3.5/2.50kW (2.9/1.75kW 4HP) 5.8/3.8A DI=15% 1100/900/MIN COZY 0.76 60°C Air direction: Inlet IP54 THCL F
Ziehl Abegg - FN091-SDS.7Q.V5P1

VT01419 Fan 3~ 400V ±10% D/Y 50Hz P1 2.20/1.70kW(1.75/1.2kW 2HP) 4.8/3.0A DI=10% 940/820/MIN COZY 0.65 80°C 3~ 400V ±10% D/Y 60Hz P1 3.30/2.2kW(2.70/1.35kW 4HP) 6.00/3.90A DI=15% 1060/820/MIN COZY 0.80 60°C 3~ 460V ±10%D/Y 60HzP1 3.5/2.50kW (2.9/1.75kW 4HP) 5.8/3.8A DI=15% 1100/900/MIN COZY 0.76 60°C Air direction: Inlet IP54 THCL F
VNX 4TB NL SAS 15X3.5 DAE
Emc - V4-Vs07-040

VNX 4TB NL SAS 15X3.5 DAE
VNX 200GB SSD 25X2.5 DPE/DAE
Emc - V4-2s6f-200

VNX 200GB SSD 25X2.5 DPE/DAE
UNIT
Ziehl Abegg - Rh40m4dk4f1r

UNIT
UL Recognized Component E111399 ZA-155 1~ 230V ±15% 50-3Hz P1 0.59kW 2.6A DI=0% 2680/MIN 12uF/400V 70°C 1~ 230V ±15% 60+3Hz P1 0.70kW 3.3A DI=0% 2550/MIN 12uF/400V 70°C IP10 THCL 155 MK092-2EK.10.U ErP compliant no Capacitor not included Connection cable on the side, 55cm. Wiring Diagram: 1360-117XA Sandwich Label Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Conveyor temperature min - 25 degrees Celsius Humidity/tropical protection. Balancing quality G 6.3 Motor 1-layer paintwork RAL 7032 (pebble grey) in resistance class 1 (L-TI-0596) Aluminum impeller, unpainted Ball bearings with long-term greasing. With Nilo ring. www.ziehl-abegg.com/erp-ab.pdf (A) www.ziehl-abegg.com/erp-ab.pdf (G)
Ziehl Abegg - RH28M-2EK.3F.1R

UL Recognized Component E111399 ZA-155 1~ 230V ±15% 50-3Hz P1 0.59kW 2.6A DI=0% 2680/MIN 12uF/400V 70°C 1~ 230V ±15% 60+3Hz P1 0.70kW 3.3A DI=0% 2550/MIN 12uF/400V 70°C IP10 THCL 155 MK092-2EK.10.U ErP compliant no Capacitor not included Connection cable on the side, 55cm. Wiring Diagram: 1360-117XA Sandwich Label Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Conveyor temperature min - 25 degrees Celsius Humidity/tropical protection. Balancing quality G 6.3 Motor 1-layer paintwork RAL 7032 (pebble grey) in resistance class 1 (L-TI-0596) Aluminum impeller, unpainted Ball bearings with long-term greasing. With Nilo ring. www.ziehl-abegg.com/erp-ab.pdf (A) www.ziehl-abegg.com/erp-ab.pdf (G)
TURBO BLOWER W/I MOTOR
Elektror - Hrd65/7/El

TURBO BLOWER W/I MOTOR
TURBO BLOWER 480VOLT
Elektror - Rd94/Fu

TURBO BLOWER 480VOLT
TURBO BLOWER 480VOLT
Elektror - Rd94-Ar-Fu-480v

TURBO BLOWER 480VOLT