FN080-SDS.6N.V7
FN080-SDS.6N.V7

FN080-SDS.6N.V7

Ziehl Abegg

Teslimat Seçenekleri
info@yursat.com.tr
Ücretsiz teslimat (Kapı Teslim)
Tedarik süreci min. 3-4 hafta
yurtiçi kargo

Ziehl Abegg ürünlerini Türkiye genelinde kapı teslimi olarak satın almak istiyorsanız, lütfen talebinizle ilgili ürün kodları ve miktarı içeren bilgileri, iletişim bilgilerinizle birlikte info@yursat.com.tr adresimize gönderiniz. Ekibimiz en kısa sürede sizlere satış teklifi sunacaktır.
FN080-SDS.6N.V7 ve diğer modellerimizi içeren geniş ürün portföyümüzü görmek için aşağıdaki listeyi kontrol edebilirsiniz. Eğer ihtiyacınız olan ürünü bulamıyorsanız, lütfen bizimle iletişime geçmekten çekinmeyin, yeni talebinizi mail gönderebilir ya da Teklif İste formunu doldurabilirsiniz.

Firmamız, Ziehl Abegg Türkiye Distribütörü veya temsilcisi değildir. Firmamız sipariş durumunda, belirtilen ürünlerde sadece Orjinal ve yeni ürün teklifi sunmaktadır. Bu sitede gösterilen Özel marka adları ve ticari markalar ilgili sahiplerinin mülkiyetindedir.
Model Tanımı

138757 - Axial fan with sickled blades and protective basket

3~ 400V D/Y 50Hz P1 1.80/1.15kW
3.9/2.2A DI=5% 900/700/MIN COZY 0.68 65°C
IP54 THCL 155
ErP compliant 2015
N=41.5
statA=36.8%
Terminal box K62
permanently mounted on the stator.
Wiring Diagram: 1360-108XA
Rating plate: 1x fixed.
Installation position H/Vu/Vo.
Motor protection: thermostat switch
Mode of operation: continuous operation with occasional
Start-up (S1) according to DIN EN 60034-1:2011-02
Occasional start-up between -40 °C and -25 °C is
Continuous operation below -25 °C only possible with special bearings for cold applications on request.
Moisture and tropical protection.
Ball bearings with long-term greasing.
Aluminum wings.
Stator unpainted
Rotor unpainted
Wings unpainted
Motor mount powder-coated RAL 9005 (jet black)
in resistance class 2 (L-TI-0585).
ring grid
All fasteners made of stainless steel.

Tüm Modeller (Ziehl Abegg)
motor
DX fan FN045-4EK.2F.V7P2

motor

Encoder shaft: 38.0 mm Resolution: 1024 pulses Voltage: 10-30 VDC Cable length: 10.00 m
Et2r-1024/38/30v

Encoder shaft: 38.0 mm Resolution: 1024 pulses Voltage: 10-30 VDC Cable length: 10.00 m

Axial fan with sickled blades and square wall ring plate. Type: FN063-4DQ.6N.V7P6 3 ~ 230 / 400V ± 10% D / Y 50Hz P1 1.75kW 6.4 / 3.7A DI = 5% 1400 / MIN COZY 0.68 70 ° C 3 ~ 230 / 400V ± 10% D / Y 60Hz P1 2.80kW 8.4 / 4.8A DI = 5% 1580 / MIN COZY 0.84 60 ° C 3 ~ 265 / 460V ± 10% D / Y 60Hz P1 2.90kW 8.0 / 4.6A DI = 10% 1640 / MIN COZY 0.80 60 ° C IP54 THCL 155 ErP compliant 2015 N = 42.5 statA = 37.5% Terminal box K62 firmly built on stator. Circuit diagram: 1360-106XA Rating plate: 1x fixed. Installation position H / Vu / Vo. Motor protection: thermostat switch Operating mode: continuous operation with occasional Startups (S1) according to DIN EN 60034-1: 2011-02 Occasional start-up between -40 ° C and -25 ° C is permitted. Permanent operation below -25 ° C only with special Storage for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term lubrication .. Aluminum wing. Stator paint: unpainted Painting rotor: unpainted Painting wing: unpainted Engine suspension, powder-coated, resistance class 2 (504 h NSS, KK) RAL 9005 (deep black). Wall ring, powder-coated, resistance class 2 (504 h NSS, KK) RAL 9005
Artikelnummer: 167240

Axial fan with sickled blades and square wall ring plate. Type: FN063-4DQ.6N.V7P6 3 ~ 230 / 400V ± 10% D / Y 50Hz P1 1.75kW 6.4 / 3.7A DI = 5% 1400 / MIN COZY 0.68 70 ° C 3 ~ 230 / 400V ± 10% D / Y 60Hz P1 2.80kW 8.4 / 4.8A DI = 5% 1580 / MIN COZY 0.84 60 ° C 3 ~ 265 / 460V ± 10% D / Y 60Hz P1 2.90kW 8.0 / 4.6A DI = 10% 1640 / MIN COZY 0.80 60 ° C IP54 THCL 155 ErP compliant 2015 N = 42.5 statA = 37.5% Terminal box K62 firmly built on stator. Circuit diagram: 1360-106XA Rating plate: 1x fixed. Installation position H / Vu / Vo. Motor protection: thermostat switch Operating mode: continuous operation with occasional Startups (S1) according to DIN EN 60034-1: 2011-02 Occasional start-up between -40 ° C and -25 ° C is permitted. Permanent operation below -25 ° C only with special Storage for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term lubrication .. Aluminum wing. Stator paint: unpainted Painting rotor: unpainted Painting wing: unpainted Engine suspension, powder-coated, resistance class 2 (504 h NSS, KK) RAL 9005 (deep black). Wall ring, powder-coated, resistance class 2 (504 h NSS, KK) RAL 9005

Crossflow fan with capillary chord and Single-phase AC motor. Type: QK08B-2EM.50.CH 1 ~ 230V ± 10% 50Hz P1 0,27kW 1,2A 2470 / MIN 6UF / 400V 1 ~ 230V ± 10% 60Hz P1 0,28kW 1.2A 2600 / MIN 6UF / 400V PsF min.50PA Operating capacitor firmly established IP10 thermal class 130 ErP compliant 2015 N = 23.7 TOTB = 19.1% Connection via European terminal block, operating capacitor built and connected Rating plate: 1x fixed Installation position H Engine storage with standard lubrication Counter bearing with cold grease Without 180 degree guide plate (standard) Impeller made of aluminum Motor mounting side B (anti-clockwise)
205165

Crossflow fan with capillary chord and Single-phase AC motor. Type: QK08B-2EM.50.CH 1 ~ 230V ± 10% 50Hz P1 0,27kW 1,2A 2470 / MIN 6UF / 400V 1 ~ 230V ± 10% 60Hz P1 0,28kW 1.2A 2600 / MIN 6UF / 400V PsF min.50PA Operating capacitor firmly established IP10 thermal class 130 ErP compliant 2015 N = 23.7 TOTB = 19.1% Connection via European terminal block, operating capacitor built and connected Rating plate: 1x fixed Installation position H Engine storage with standard lubrication Counter bearing with cold grease Without 180 degree guide plate (standard) Impeller made of aluminum Motor mounting side B (anti-clockwise)

Ziehl-Abegg Zadyn4cs/ 62 A
siehe Bild
Imb3

siehe Bild

L-Erp_Pauschale (Flat Rate)
Fn050-Vdk.4i.V7p1 Ziehl Abegg Fan
Artikelnummer: 121860E Single-flow motor fan with backward curved blades 3 ~ 400V ± 10% Y 50Hz P1 0.19kW 0.34A 2700 / MIN COZY 0.81 70 ° C 3 ~ 400V ± 10% Y 60Hz P1 0.31kW 0.47A DI = 5% 2840 / MIN COZY 0.94 40 ° C 3 ~ 460V ± 10% Y 60Hz P1 0.34kW 0.46A DI = 5% 3010 / MIN COZY 0.94 40 ° C IP44 THCL 155 ErP compliant no Connection cable laterally, 105cm. Schematic: 1360-159XA sandwich label Rating plate: 1x fixed. Installation position H / Vu / Vo. Motor protection: thermostat switch Operating mode: continuous operation with occasional Start-ups (S1) according to DIN EN 60034-1: 2011-02 Occasional starting between -40 ° C and -25 ° C is permissible. Permanent operation below -25 ° C only with special Storage for refrigeration applications available on request. Wet / tropical protection. Balancing weight G 6.3
Type: Rh22m-2dk.1b.1r

Artikelnummer: 121860E Single-flow motor fan with backward curved blades 3 ~ 400V ± 10% Y 50Hz P1 0.19kW 0.34A 2700 / MIN COZY 0.81 70 ° C 3 ~ 400V ± 10% Y 60Hz P1 0.31kW 0.47A DI = 5% 2840 / MIN COZY 0.94 40 ° C 3 ~ 460V ± 10% Y 60Hz P1 0.34kW 0.46A DI = 5% 3010 / MIN COZY 0.94 40 ° C IP44 THCL 155 ErP compliant no Connection cable laterally, 105cm. Schematic: 1360-159XA sandwich label Rating plate: 1x fixed. Installation position H / Vu / Vo. Motor protection: thermostat switch Operating mode: continuous operation with occasional Start-ups (S1) according to DIN EN 60034-1: 2011-02 Occasional starting between -40 ° C and -25 ° C is permissible. Permanent operation below -25 ° C only with special Storage for refrigeration applications available on request. Wet / tropical protection. Balancing weight G 6.3

Single-flow motor fan with backward curved blades Type: RH28L-2EP.WD.1R 1 ~ 230V 50Hz P1 290W 1.24A DI = 0% 2250 / MIN 8uF / 400V 45 ° C THCL 155 IP44 depending on installation and position according to EN 60034-5 ErP compliant no Capacitor not included Connection cable variable 45cm. Schematic: 1360-177X sandwich label Rating plate: 1x fixed. Installation position H / Vu / Vo. Motor protection: thermostat switch Balancing weight G 6.3 Condensate holes in the stator and rotor open Stator unpainted Rotor with 1-coat finish RAL 5002 (ultramarine blue).
113045e

Single-flow motor fan with backward curved blades Type: RH28L-2EP.WD.1R 1 ~ 230V 50Hz P1 290W 1.24A DI = 0% 2250 / MIN 8uF / 400V 45 ° C THCL 155 IP44 depending on installation and position according to EN 60034-5 ErP compliant no Capacitor not included Connection cable variable 45cm. Schematic: 1360-177X sandwich label Rating plate: 1x fixed. Installation position H / Vu / Vo. Motor protection: thermostat switch Balancing weight G 6.3 Condensate holes in the stator and rotor open Stator unpainted Rotor with 1-coat finish RAL 5002 (ultramarine blue).

TEKLİF ALIN

fiyat teklifinizi en kısa sürede size sunmaktayız

Alanı Doldurunuz
İyi görünüyor!
Lütfen E-Postanızı Doğru Giriniz
İyi görünüyor!
Alanı Doldurunuz
İyi görünüyor!
Alanı Doldurunuz

BENZER ÜRÜNLER

Trumpf
Trumpf
Elettropompe
Elettropompe
Autonics
Autonics
Taiko
Taiko
Prevost
Prevost