Sp-Rhe-11-D6

RHM04S-N1-P1-PMO-35-G1-J5-FK-NN-SE-N-A

Coriolis mass flow meter for liquids and gases Measuring point data (please complete): Medium: Flow: Pressure: bars Temperature: °C Density: kg/m3 Viscosity: cP We recommend to add the missing measuring point data supplement , otherwise not for a flawless Device design can be guaranteed. Coriolis transducer Model RHM04S NEW DESIGN N1 temperature: normal temperature (NT) -20 to +120°C P1 operating pressure max. 157 bar at 120°C Measuring tubes: Mat. 1.4435 (316L) PM0 measuring tubes: Parallel arrangement, more detachable connection block off 1.4571, Pmax. 700 bar, 35 Material: measuring tube material EN 1.4435, SS316L, US S31603 (Default) G1 process connection: internal thread G ¼", max. 540bar at 120°C J5 connection housing: coated cast aluminium, Cable entry 1x or 2x M12, compact version with RHE45 Only for Ex Code: NN For temp. ranges: N1,NA,E2 (Tmax. 90°C at N1, NA) FK option: FFKM seals instead of Standard seals, e.g Applications with aggressive chemicals NN Ex protection: none SE design: manufacturer standard according to EN SEP (Common Engineering Practice) according to DGRL Art.3 Section 3. On request, the corresponding Manufacturer's declaration (certificate) available at extra cost N Service: no special services A Cal Accuracy: Standard Accuracy 0.2

RHE45-C1-D1-SO-S1

Coriolis transmitter model RHE45 Compact design, mounted directly on the RHM Housing: Die-cast aluminum with epoxy coating Dimensions: ~125 x 80 x 57mm (HxWxD). Mounting: Mounted directly on the RHM Operation: Via RHECom operating software or optionally via 3 membranes button on the front panel Connections: via 12 or 8 pins Screw terminals and USB to the PC connection Degree of protection: IP66 / NEMA 4 Operating temperature: -40°C to +60°C, below -10°C reduced visibility at optional display Analog outputs: up to 2 x 4-20mA, active or passive Pulse Freq. Stat Out: up to 2 x configurable Im pulse/frequency/congestion outputs (IEC60946), max 10kHz Digital inputs: up to 2 control inputs, (IEC60946) For details see the following coding: C1 electronics type: compact design on the RHM Assembled, with M12, connector and Cable - requires option J5 D1 voltage: 12 - 24 VDC +/- 10%, max. 4 watts SO Software: Standard operating system - mass flow measurement incl. Density fixed value, volume flow calculation S1 inputs/outputs: 1 x RS485 MODBUS RTU, 1 x 4-20mA output (active) 2 x digital outputs (pulse, frequency or status output) 1 x digital input 1 x M12 12 Pin

Model RHM04S NEW DESIGN

type code: RHM04S-N1-P2-PM0-10-N1-JM-T1-FK-NN-SE-A N1 temperature: normal temperature (NT) -20 to +120 °C P2 operating pressure max. 540 bar at 120 °C Measuring tubes: for material HP160. Operating pressure max. 662 bar at 120 °C Measuring tubes: with material EN 1.4410 / SuperDuplex PM0 measuring tubes: Parallel arrangement, more detachable connection block off SS316L, Pmax. 700 bar/120°C, Temp. N1 with FKM seals Temp. NA with FVMQ seals (max. 1000 bar/120°C) Temp.E2 with FFKM seals (max. 300 bar / 210 °C) 10 Material: Measuring tube material Super Duplex EN 1.4410, UNS S32750 (Tmin. -40°C) N1 process connection: internal thread ¼" NPT, max. 700 bar at 120 °C JM connection housing: cast aluminum coated, Cable entry M20x1.5 not for Ex protection: A0 For externally mounted RHE2x/4x T1 Option: Housing rotated 180° Connections are at the top FK option: FFKM seals instead of Standard seals, e.g Applications with aggressive chemicals NN Ex protection: none SE design: manufacturer standard according to EN SEP (Common Engineering Practice) according to DGRL Art.3 Section 3. On request, the corresponding Manufacturer's declaration (certificate) available at extra cost A Cal. Accuracy: Standard Accuracy 0.2% 3 points (RHE 16 or higher, otherwise 0.5%)

Coriolis Transmitter Modell RHE45

Compact design, mounted directly on the RHM Type code: RHE45-C1-D1-SO-S2 Housing: Die-cast aluminum with epoxy coating Dimensions: ~125 x 80 x 57mm (HxWxD). Mounting: Mounted directly on the RHM Operation: Via RHECom operating software or optionally via 3 membranes button on the front panel Connections: via 12 or 8 pins Screw terminals and USB to the PC connection Degree of protection: IP66 / NEMA 4 Operating temperature: -40°C to +60°C, below -10°C reduced visibility at optional display Analog outputs: up to 2 x 4-20mA, active or passive Pulse Freq. Stat Out: up to 2 x configurable Im pulse/frequency/congestion outputs (IEC60946), max 10kHz Digital inputs: up to 2 control inputs, (IEC60946) For details see the following coding: C1 electronics type: compact design on the RHM Assembled, with M12, connector and Cable - requires option J5 D1 voltage: 12 - 24 VDC +/- 10%, max. 4 watts SO Software: Standard operating system - mass flow measurement incl. Density fixed value, volume flow calculation S2 inputs/outputs: 1 x RS485 MODBUS RTU, 2 x 4-20mA output (active) 2 x digital outputs (pulse, frequency or status output) 1 x digital input 1 x M12 12 Pin

Electronictype

compact design with Display mounted on RHM, with M12, connector and cable - requires option J5

Software

advanced operating system - mass flow measurement incl. Density measurement, volume flow calculation

Dincon

Rhe – 20728

Rhm160-Ta-P1-Pf0-M1-A2-At

Tr 51.0