Kategoriler
YTC mounting kit for YTC YT-2500L postitioners
Rotork - YT-RE1000SOPLIN

YTC mounting kit for YTC YT-2500L postitioners
YTC lever for attachment of SmartPositioner to linear drives Lifting height: 20-100mm
Rotork - SR-YT-RELINCONBAR

YTC lever for attachment of SmartPositioner to linear drives Lifting height: 20-100mm
volume booster Type YT-310 Material: Die-cast aluminum maximum pressure range: 10 bar maximum outlet pressure: 7 bar Input/output pressure ratio 1:1 Flow capacity CV: 4.98 Inlet/Outlet: NPT 3/4" Control input NPT 1/4" Temperature range -20° to +70°C
Rotork - VB-YT-310N1

volume booster Type YT-310 Material: Die-cast aluminum maximum pressure range: 10 bar maximum outlet pressure: 7 bar Input/output pressure ratio 1:1 Flow capacity CV: 4.98 Inlet/Outlet: NPT 3/4" Control input NPT 1/4" Temperature range -20° to +70°C
Voltage 230V 50Hz Running time 30 seconds. 90° Torque 20 Nm Accesories: 2 additional switches potential-free 1 manual/auto switch 2 buttons open/close 1 potentiometer Novotechnik 0-5K ohms 3 point step control IP65 Direction of rotation LEFT
Schimpf - Antriebs- & Regeltechnik - Variable speed drive 01-15/30 N

Voltage 230V 50Hz Running time 30 seconds. 90° Torque 20 Nm Accesories: 2 additional switches potential-free 1 manual/auto switch 2 buttons open/close 1 potentiometer Novotechnik 0-5K ohms 3 point step control IP65 Direction of rotation LEFT
Ventilantrieb
Sauter - Avm 115 Sf 132

Ventilantrieb
Vent drive, SUT,24V, 0..49mm, 2500N,UL Sauter field devices
Sauter - AVM234SF132U

Vent drive, SUT,24V, 0..49mm, 2500N,UL Sauter field devices
Type YT-300 Material: die-cast aluminum max. supply pressure: 1MPa (10 bar) Max. signal/outlet pressure: 0.7 MPa (7 bar) Inlet/outlet pressure ratio: 1:1 Flow Capacity (Cv ): Output = 1.32 outlet = 1.19 In/Out Connection: 1/4" NPT Signal connection: 1/4" NPT Ambient temperature: -20oC => + 70oC
Rotork - VB-YT-300N1

Type YT-300 Material: die-cast aluminum max. supply pressure: 1MPa (10 bar) Max. signal/outlet pressure: 0.7 MPa (7 bar) Inlet/outlet pressure ratio: 1:1 Flow Capacity (Cv ): Output = 1.32 outlet = 1.19 In/Out Connection: 1/4" NPT Signal connection: 1/4" NPT Ambient temperature: -20oC => + 70oC
TUC107F001 Universalthermostat,TW,50..130°C, L=0,7m
Sauter - Replacement for RAK582.4/3726

TUC107F001 Universalthermostat,TW,50..130°C, L=0,7m
THREE PHASE ELECTRIC ACTUATOR
Rotork - Iq40 F25 B4 [ii 2 Gd Exd Iic T4] 72rpm 400/3/50

THREE PHASE ELECTRIC ACTUATOR
The originally delivered gearbox is an IW5 MK1. This type is no longer available. We therefore offer you the successor model MK 2. The originally delivered gearbox had a reduction of 120:1, a max. input torque of 93 Nm and a MA of 48. The max. possible output torque was 4447 Nm. The offered gearbox has a reduction of 192:1, a max. input torque of 110 Nm and a MA of 61. The max. possible output torque is 6670 Nm. The higher reduction increases the stroke time (depending on the rpm of the actuator). Please clarify with your customer if the new performance is ok. The offered gearbox is only primed (as the originally delivered gearbox). Painting is possible on request at no extra charge.
Rotork - IWHT5/IR1 192:1 Fig. B1 Orient. West F10 IP F14 OP

The originally delivered gearbox is an IW5 MK1. This type is no longer available. We therefore offer you the successor model MK 2. The originally delivered gearbox had a reduction of 120:1, a max. input torque of 93 Nm and a MA of 48. The max. possible output torque was 4447 Nm. The offered gearbox has a reduction of 192:1, a max. input torque of 110 Nm and a MA of 61. The max. possible output torque is 6670 Nm. The higher reduction increases the stroke time (depending on the rpm of the actuator). Please clarify with your customer if the new performance is ok. The offered gearbox is only primed (as the originally delivered gearbox). Painting is possible on request at no extra charge.
The originally delivered gearbox is an IW4 MK1. This type is no longer available. We therefore offer you the successor model MK 2. The originally delivered gearbox had a reduction of 70:1, a max. input torque of 88 Nm and a MA of 23. The max. possible output torque was 2650 Nm. The offered gearbox has a reduction of 92:1, a max. input torque of 96 Nm and a MA of 30. The max. possible output torque is 2900 Nm. The higher reduction increases the operating time (depending on the rpm of the actuator). Please clarify with your customer if the new performance is ok. The offered gearbox is supplied in standard paint finish (as the originally delivered gearbox). The drive sleeve is unmachined.
Rotork - IW46/IR1 92:1 Fig. B1 Orient. West F10 IP F14 OP

The originally delivered gearbox is an IW4 MK1. This type is no longer available. We therefore offer you the successor model MK 2. The originally delivered gearbox had a reduction of 70:1, a max. input torque of 88 Nm and a MA of 23. The max. possible output torque was 2650 Nm. The offered gearbox has a reduction of 92:1, a max. input torque of 96 Nm and a MA of 30. The max. possible output torque is 2900 Nm. The higher reduction increases the operating time (depending on the rpm of the actuator). Please clarify with your customer if the new performance is ok. The offered gearbox is supplied in standard paint finish (as the originally delivered gearbox). The drive sleeve is unmachined.
the EL-O-MATIC F series, ISO F03/F05, double-acting, 90° closing in the Clockwise, square drive 11mm Parallel, with double stroke limitation Adjustment range open position 80° to 95° - closed position 10° to - 5°, Standard temperature version -20°C to +80°C.
El-O-Matic - FD0025.NM00CWALT.NL11SNA.00XX

the EL-O-MATIC F series, ISO F03/F05, double-acting, 90° closing in the Clockwise, square drive 11mm Parallel, with double stroke limitation Adjustment range open position 80° to 95° - closed position 10° to - 5°, Standard temperature version -20°C to +80°C.