Kategoriler
Needle marking system e10-p123-40 For the efficient and permanent labeling of your products of all kinds made of metal, plastic, wood, etc. The marking system is characterized above all by its robust and industrial design according to the following specification: Marking head Hand tool with handle in pistol shape X-axis with linear guide and ball-bearing slide, drive via Rack, Y-axis swivel drive via rack rubberized front plate for position fixation with V recess and Quick setting for workpiece distance Labeling area 120 x 40 mm, LED lighting Electromagnetic needle drive with needle guide and 100 mm marking needle made of hard metal Embossing up to 62 HRC material hardness possible max. 5 mm height adjustment, depending on the embossing force Noise development 76 dB (measured at medium stamping force and speed on sheet steel) 7.5 m control cable to the control unit with cable bend protection Weight 3.7 kg Control unit Integrated membrane keyboard, high-resolution color display (480x272 pixels) USB interface, special USB driver is required RS 232 and RS 422 interface Ethernet and gateway for Profibus optional Signal exchange via potential-free contacts, start / stop unit Weight 5.0 kg software Font height adjustable from 0.5 to 25 mm Dot matrix: 5x7 and 9x13 points per character, variably adjustable point spacings from 0.05 to 1.0 mm linear, circular and angular labeling Multi-line labeling possible in an embossing file inverted and mirror writing Fonts OCR, OCR-A, Arial and Courier Serial numbers in ascending and descending order, time variables, shifts Data Matrix marking (ECC200), Embossing of logos (PC software for logo creation available separately) Preview and simulation of the embossing up to 2000 embossed files programmable Call of 63 programmed files BCD coded Serial communication in ASCII protocol, text protocol and binary protocol
Sic Marking - E10-P123-40

Needle marking system e10-p123-40 For the efficient and permanent labeling of your products of all kinds made of metal, plastic, wood, etc. The marking system is characterized above all by its robust and industrial design according to the following specification: Marking head Hand tool with handle in pistol shape X-axis with linear guide and ball-bearing slide, drive via Rack, Y-axis swivel drive via rack rubberized front plate for position fixation with V recess and Quick setting for workpiece distance Labeling area 120 x 40 mm, LED lighting Electromagnetic needle drive with needle guide and 100 mm marking needle made of hard metal Embossing up to 62 HRC material hardness possible max. 5 mm height adjustment, depending on the embossing force Noise development 76 dB (measured at medium stamping force and speed on sheet steel) 7.5 m control cable to the control unit with cable bend protection Weight 3.7 kg Control unit Integrated membrane keyboard, high-resolution color display (480x272 pixels) USB interface, special USB driver is required RS 232 and RS 422 interface Ethernet and gateway for Profibus optional Signal exchange via potential-free contacts, start / stop unit Weight 5.0 kg software Font height adjustable from 0.5 to 25 mm Dot matrix: 5x7 and 9x13 points per character, variably adjustable point spacings from 0.05 to 1.0 mm linear, circular and angular labeling Multi-line labeling possible in an embossing file inverted and mirror writing Fonts OCR, OCR-A, Arial and Courier Serial numbers in ascending and descending order, time variables, shifts Data Matrix marking (ECC200), Embossing of logos (PC software for logo creation available separately) Preview and simulation of the embossing up to 2000 embossed files programmable Call of 63 programmed files BCD coded Serial communication in ASCII protocol, text protocol and binary protocol
Nadelmarkiersystem ec1 The column-based needle marking system ec1 marks workpieces using electromagnetic needle marking technology. This process enables reliable and unchangeable marking directly into the surface of the material. Specifications: Combined device with column mechanics and controller. High-quality red plastic housing cover. Smooth column adjustment handle. Steel column with position scale for precise setting of the workpiece distance. Motion control via racks and gears. Stepper motors control the movement of the needle. Embossing needle (length 80mm 90°, carbide) driven by an electromagnet. All electric, no compressed air required. Modern user guidance and intuitive software. On/off switch to trigger the marking cycle Additional USB port. Further data: · Marking window: 120 x 100 mm Dimensions: 311 x 300 x 635mm Weight: 16kg control unit Integrated membrane keyboard, graphic display USB interface, special USB driver is required RS 232 interface software Font height adjustable from 0.5 to 25 mm Dot matrix: 5x7 and 9x13 dots per character as well as variably adjustable Dot spacing from 0.22 to 1.0 mm rectilinear, circle and angle annotation multi-line labeling possible in one embossing file Fonts OCR, OCR-A, Arial and Courier serial numbers, time variables Data Matrix marking (ECC200), embossing of logos Preview and simulation of the embossing up to 500 embossing files programmable
Sic Marking - EC1

Nadelmarkiersystem ec1 The column-based needle marking system ec1 marks workpieces using electromagnetic needle marking technology. This process enables reliable and unchangeable marking directly into the surface of the material. Specifications: Combined device with column mechanics and controller. High-quality red plastic housing cover. Smooth column adjustment handle. Steel column with position scale for precise setting of the workpiece distance. Motion control via racks and gears. Stepper motors control the movement of the needle. Embossing needle (length 80mm 90°, carbide) driven by an electromagnet. All electric, no compressed air required. Modern user guidance and intuitive software. On/off switch to trigger the marking cycle Additional USB port. Further data: · Marking window: 120 x 100 mm Dimensions: 311 x 300 x 635mm Weight: 16kg control unit Integrated membrane keyboard, graphic display USB interface, special USB driver is required RS 232 interface software Font height adjustable from 0.5 to 25 mm Dot matrix: 5x7 and 9x13 dots per character as well as variably adjustable Dot spacing from 0.22 to 1.0 mm rectilinear, circle and angle annotation multi-line labeling possible in one embossing file Fonts OCR, OCR-A, Arial and Courier serial numbers, time variables Data Matrix marking (ECC200), embossing of logos Preview and simulation of the embossing up to 500 embossing files programmable
Nadel 60 mm/90° Material: carbide Diameter: 4mm Length: 60mm Bevel: 90°
Sic Marking - 1120012

Nadel 60 mm/90° Material: carbide Diameter: 4mm Length: 60mm Bevel: 90°
Material: carbide Diameter: 4mm Length: 80mm Bevel: 90°
Sic Marking - Needle 80mm/90°

Material: carbide Diameter: 4mm Length: 80mm Bevel: 90°
Marking head ADP5090 Controller AC500 including software Adjustable pressure reducer with filter water separator flexible connection cable 4 meters (Controller <–> ADP) Power supply / power supply 48V a marking tip (guide sleeve, spring, marking pin) 3, 6 or 12mm standard
Automator - ADP 5090 system (marking area 90x50 mm)

Marking head ADP5090 Controller AC500 including software Adjustable pressure reducer with filter water separator flexible connection cable 4 meters (Controller <–> ADP) Power supply / power supply 48V a marking tip (guide sleeve, spring, marking pin) 3, 6 or 12mm standard
magnetic faceplate p123-40 Complete bracket for mounting on the pistol p123-40 Holding by 5 permanent magnets (optionally expandable to 10 pieces) Hard anodized surface ATTENTION! Cannot be used with transport trolleys 4400248 + 4400251!
Sic Marking - DL-IMW-0001 (Optional)

magnetic faceplate p123-40 Complete bracket for mounting on the pistol p123-40 Holding by 5 permanent magnets (optionally expandable to 10 pieces) Hard anodized surface ATTENTION! Cannot be used with transport trolleys 4400248 + 4400251!
Louvred Solenoid Assembly
Sic Marking - 3200010

Louvred Solenoid Assembly
Lens Kit F254 - 170x170 - T Upgrade: larger marking field 170 x 170 mm Focus distance 329mm +/- 3mm Replaces the 100 x 100 mm marking field Kit includes lens and lens ring for galvo head T
Sic Marking - 7100062

Lens Kit F254 - 170x170 - T Upgrade: larger marking field 170 x 170 mm Focus distance 329mm +/- 3mm Replaces the 100 x 100 mm marking field Kit includes lens and lens ring for galvo head T
Lens Kit F160 - 100x100 - T Marking field 100 x 100 mm Focus distance 194mm +/- 2mm Kit includes lens and lens ring for galvo head T
Sic Marking - 7100061

Lens Kit F160 - 100x100 - T Marking field 100 x 100 mm Focus distance 194mm +/- 2mm Kit includes lens and lens ring for galvo head T
Integrationslaser Easy 20W Advanced2 Laser system I104 Easy - 20W Advanced - integration system - Pulsating Ytterbium fiber laser 20W - Wavelength: 1064nm - Laser beam deflection via galvanometer head - Marking field 100 x 100 mm - Interfaces: USB, RS232, Ethernet (Telnet) - CE certified device - Connection and consumption: 230V/ 16A / 50-60Hz - Power consumption (max): 750W - Focusing distance 194 mm (depending on the lens) - Fiber length 3 meters - Laser protection class 4 - Cooling: exclusively air-cooled, no water connection required - Operating conditions: working temperature 15°C to 45°C - Humidity (relative): 30 to 85%, non-condensing - Incl. software for control via the PLC - without PC for operation (PC is only required for file creation)
Sic Marking - I104EAD-T-20W

Integrationslaser Easy 20W Advanced2 Laser system I104 Easy - 20W Advanced - integration system - Pulsating Ytterbium fiber laser 20W - Wavelength: 1064nm - Laser beam deflection via galvanometer head - Marking field 100 x 100 mm - Interfaces: USB, RS232, Ethernet (Telnet) - CE certified device - Connection and consumption: 230V/ 16A / 50-60Hz - Power consumption (max): 750W - Focusing distance 194 mm (depending on the lens) - Fiber length 3 meters - Laser protection class 4 - Cooling: exclusively air-cooled, no water connection required - Operating conditions: working temperature 15°C to 45°C - Humidity (relative): 30 to 85%, non-condensing - Incl. software for control via the PLC - without PC for operation (PC is only required for file creation)

Integration laser Easy 20W Advanced2 Laser system I104 Easy - 20W Advanced - integration system Pulsating ytterbium fiber laser 20W - Wavelength: 1064nm - Laser beam deflection via galvanometer head - Marking field 100 x 100 mm - Interfaces: USB, RS232, Ethernet (Telnet) - CE certified device - Connection and consumption: 230V/ 16A / 50-60Hz - Power consumption (max): 750W - Focusing distance 194 mm (depending on the lens) - Fiber length 3 meters - Laser protection class 4 - Cooling: exclusively air-cooled, no water connection required - Operating conditions: working temperature 15°C to 45°C - Humidity (relative): 30 to 85%, non-condensing - Incl. software for control via the PLC - without PC for operation (PC is only required for file creation)
Sic Marking - I104EAD-T-20W

Integration laser Easy 20W Advanced2 Laser system I104 Easy - 20W Advanced - integration system Pulsating ytterbium fiber laser 20W - Wavelength: 1064nm - Laser beam deflection via galvanometer head - Marking field 100 x 100 mm - Interfaces: USB, RS232, Ethernet (Telnet) - CE certified device - Connection and consumption: 230V/ 16A / 50-60Hz - Power consumption (max): 750W - Focusing distance 194 mm (depending on the lens) - Fiber length 3 meters - Laser protection class 4 - Cooling: exclusively air-cooled, no water connection required - Operating conditions: working temperature 15°C to 45°C - Humidity (relative): 30 to 85%, non-condensing - Incl. software for control via the PLC - without PC for operation (PC is only required for file creation)
Image 2: 3 short 2 long motor cables Image 3: 2 motor cards Image 4: We want 3 20 sockets (marked area in the photo) and a 15 cm cable connection in the socket.
Automator - ADP-25120

Image 2: 3 short 2 long motor cables Image 3: 2 motor cards Image 4: We want 3 20 sockets (marked area in the photo) and a 15 cm cable connection in the socket.