Kategoriler
Load cell BK2-2000kg-TM-C3 Technical data according to data sheet A53
Flintec - 5038-083

Load cell BK2-2000kg-TM-C3 Technical data according to data sheet A53
Load cell
Tensometric - M1355 Nh 2 24volt 500n

Load cell
Junction box KPK-4 for 4 load cells, connection with spring clips Casing: Polyester, IP66, 75 x 230 x 50 mm glands: 4x M12x1.5, 1x M16x1.5 Cornerstone: with resistors / potentiometer
Flintec - 5200-017

Junction box KPK-4 for 4 load cells, connection with spring clips Casing: Polyester, IP66, 75 x 230 x 50 mm glands: 4x M12x1.5, 1x M16x1.5 Cornerstone: with resistors / potentiometer
Inductive position sensor, measuring range 25 mm, Non-linearity 0.25% of the original, output 0 ... 5 V, Plug 7-pin Plant Datasheet: 8740
Burster - 8741-5025

Inductive position sensor, measuring range 25 mm, Non-linearity 0.25% of the original, output 0 ... 5 V, Plug 7-pin Plant Datasheet: 8740
Heat Exchange Left
Baseline - G1316-60007

Heat Exchange Left
FR 5503 infrared edge sensor for clamping frames according to dimension sheet 10514704 Measuring range +/- 10 mm with microprocessor, LED display scale with membrane keyboard, Plug for operating voltage 24 V and CAN bus, with mechanical scanning and with spring clip. Net weight about 0.625 kg / piece. Origin: European Union (EN) HS 90314990
Erhardt + Leimer - Fr 5503

FR 5503 infrared edge sensor for clamping frames according to dimension sheet 10514704 Measuring range +/- 10 mm with microprocessor, LED display scale with membrane keyboard, Plug for operating voltage 24 V and CAN bus, with mechanical scanning and with spring clip. Net weight about 0.625 kg / piece. Origin: European Union (EN) HS 90314990
Force transducers according to our technical data sheet PR35/A/7
Asa rt - ATB-PR35/750/AINH

Force transducers according to our technical data sheet PR35/A/7
for mounting on a top hat rail Power supply 10..30 V DC Approved for 10,000 parts -with serial interface RS422 / 485 -with Ethernet TCP / IP -Analog output (current / voltage) -2 digital inputs -3 digital outputs
Flintec - Universal weight indicator type DAD 141.1

for mounting on a top hat rail Power supply 10..30 V DC Approved for 10,000 parts -with serial interface RS422 / 485 -with Ethernet TCP / IP -Analog output (current / voltage) -2 digital inputs -3 digital outputs
for direct, correct digits - LED 14 mm, red, 3 ½ digits - 0… ± 10 V input signal - Display value freely scalable - for 24 V DC supply - With integrated DC / DC converter for electrical isolation between supply voltage and measuring circuit
Honigmann - Digital Panel Meter Dpm 502

for direct, correct digits - LED 14 mm, red, 3 ½ digits - 0… ± 10 V input signal - Display value freely scalable - for 24 V DC supply - With integrated DC / DC converter for electrical isolation between supply voltage and measuring circuit
Factory calibration certificate for force sensors or Measuring chains. Measuring range end values: 0 ... 1 N to 0 ... 200 kN in pressure direction, 5 power levels evenly distributed (20% steps). Increasing and decreasing measuring force at unchanged installation position. (Measuring range 􀂕􀀃􀀘􀀃N, at least 4 force levels). You can obtain your calibration certificate from: www.burster.de/Kalibrierung
Burster - 85WKS-85DX-6200 (optional)

Factory calibration certificate for force sensors or Measuring chains. Measuring range end values: 0 ... 1 N to 0 ... 200 kN in pressure direction, 5 power levels evenly distributed (20% steps). Increasing and decreasing measuring force at unchanged installation position. (Measuring range 􀂕􀀃􀀘􀀃N, at least 4 force levels). You can obtain your calibration certificate from: www.burster.de/Kalibrierung
F60X500
Scaime - C3 Ch 10e 6-W Tr

F60X500
F 31E edge sensor mechanically right, with 2 individually finely adjustable silver contacts for max. 60 V 0.2 A, control bandwidth 0.5 - 30 mm and contact force of the feeler lever adjustable, protection class IP 33, max. 80 degrees C including 2 m connection cable Origin: European Union (DE) HS 90318080
Erhardt + Leimer - F 31e

F 31E edge sensor mechanically right, with 2 individually finely adjustable silver contacts for max. 60 V 0.2 A, control bandwidth 0.5 - 30 mm and contact force of the feeler lever adjustable, protection class IP 33, max. 80 degrees C including 2 m connection cable Origin: European Union (DE) HS 90318080