Kategoriler
External thread connection according to ISO 228 Max. supply pressure: 12 bar Housing: stainless steel 1.4408 Internal parts in contact with media: stainless steel 1.4404 Seat seal: FPM
Berluto - KSV 80 1 1/2"

External thread connection according to ISO 228 Max. supply pressure: 12 bar Housing: stainless steel 1.4408 Internal parts in contact with media: stainless steel 1.4404 Seat seal: FPM
External thread according to ISO 7 Max. Pre-pressure: 40 bar Setting range: 1.5 - 6 bar Housing: gunmetal CC499K internal parts in contact with media: Brass CW614N & Hostaform C Membrane: FPM Seals: FPM *** Customs fee number. 84811005 *** The above-mentioned pressure reducers conform to the Pressure Equipment Directive 2014/68 / EU. (PED 2014/68 / EU category I) + Manometer 0-10 bar
Berluto - DRV 402-1/2''-SA

External thread according to ISO 7 Max. Pre-pressure: 40 bar Setting range: 1.5 - 6 bar Housing: gunmetal CC499K internal parts in contact with media: Brass CW614N & Hostaform C Membrane: FPM Seals: FPM *** Customs fee number. 84811005 *** The above-mentioned pressure reducers conform to the Pressure Equipment Directive 2014/68 / EU. (PED 2014/68 / EU category I) + Manometer 0-10 bar
External Pressure Relief Valve 2-1/2" When ordering, please specify whether multiport or single installation.
Rego - A3149:17,6 bar

External Pressure Relief Valve 2-1/2" When ordering, please specify whether multiport or single installation.
External Pressure Relief Valve 2-1/2"
Rego - RegO A3149:17,6

External Pressure Relief Valve 2-1/2"
External Hydrostatic Relief Valve 1/4" M.NPT (350 PSI)
Rego - RegO 3127J

External Hydrostatic Relief Valve 1/4" M.NPT (350 PSI)
External Hydrostatic Relief Valve 1/4" M.NPT (300 PSI)
Rego - RegO 3127P

External Hydrostatic Relief Valve 1/4" M.NPT (300 PSI)
Ersatz 6008M3A (EPDM)
Gemü - 6008M3A

Ersatz 6008M3A (EPDM)
End valve Ball valve ZE Order code: ZE451025 Dn25
End Armaturen - Order code: ZE451025

End valve Ball valve ZE Order code: ZE451025 Dn25
ELEMENT FILTER
Hydac - 2600 R 025 W/Hc

ELEMENT FILTER
Electro-pneumatic valve, normally closed-NC, class A, Type test certificate according to the Gas Appliances Ordinance EU/2016/426, test basis EN 161 Type: 1-4-EPVA 200H-4.Z.02.32.66.99 Replaces type: 1-4-EPVA 200H-4.Z.00.32.66.99 Prod. Ident. No.: CE0085AQ0211 Pressure range: 0 - 1 bar Nominal diameter: DN 200 Flange connection: PN 10 Medium: natural gas Media temp.: -20°C to +60°C Ambient temp.: -20°C to +60°C Installation position: vertical or horizontal drive Case material: 5.1301 Seat material 1.4571 Internal parts: St/Ms/Al/Stainless steel Sealing elements: NBR Spindle seal: lip ring P. drive: KA160 Control pressure: 4bar to 10bar Control valve: 10-EVD 2/2401 Nominal width: G 1/4; DN5 Case material: Ms Sealing elements: NBR Magnetic drive: 3803 Electrical power: 18VA Protection class: IP65 Electrical connection: DIN EN 175301-803A with LED Approval: EC type test. according to EN 16678 Electrical voltage: 230 VAC Limit switch: 2 pieces mechanical Manufacturer: Schaltbau Type: S870 W1 G1R Contact: Silver Valve position: open/close Electrical connection: DIN VDE 0627/IEC 61984 Electrical voltage: 230 VAC with hydraulic opening delay Special: with measuring connection G 1/2 and locking screw. in the entrance and exit on both sides with air filter G 1/4
Uni Gerate - AR069515

Electro-pneumatic valve, normally closed-NC, class A, Type test certificate according to the Gas Appliances Ordinance EU/2016/426, test basis EN 161 Type: 1-4-EPVA 200H-4.Z.02.32.66.99 Replaces type: 1-4-EPVA 200H-4.Z.00.32.66.99 Prod. Ident. No.: CE0085AQ0211 Pressure range: 0 - 1 bar Nominal diameter: DN 200 Flange connection: PN 10 Medium: natural gas Media temp.: -20°C to +60°C Ambient temp.: -20°C to +60°C Installation position: vertical or horizontal drive Case material: 5.1301 Seat material 1.4571 Internal parts: St/Ms/Al/Stainless steel Sealing elements: NBR Spindle seal: lip ring P. drive: KA160 Control pressure: 4bar to 10bar Control valve: 10-EVD 2/2401 Nominal width: G 1/4; DN5 Case material: Ms Sealing elements: NBR Magnetic drive: 3803 Electrical power: 18VA Protection class: IP65 Electrical connection: DIN EN 175301-803A with LED Approval: EC type test. according to EN 16678 Electrical voltage: 230 VAC Limit switch: 2 pieces mechanical Manufacturer: Schaltbau Type: S870 W1 G1R Contact: Silver Valve position: open/close Electrical connection: DIN VDE 0627/IEC 61984 Electrical voltage: 230 VAC with hydraulic opening delay Special: with measuring connection G 1/2 and locking screw. in the entrance and exit on both sides with air filter G 1/4
Electro-pneumatic valve, normally closed-NC, class A, Type test certificate according to the Gas Appliances Ordinance EU/2016/426, test basis EN 161 Projekt: ZO058 Type: 1-4-EPVA 200H-4.02.32.66.99 Prod. Ident. No.: CE0085AQ0211 Pressure range: 0 - 1 bar Nominal diameter: DN 200 Flange connection: PN 10 Medium: natural gas Media temp.: -20°C to +60°C Ambient temp.: -20°C to +60°C Installation position: vertical or horizontal drive Case material: EN-JL1040 (GG25) Seat material 1.4571 Internal parts: St/Ms/Al/Stainless steel Sealing elements: NBR Spindle seal: lip ring P. drive: KA160 Control pressure: 4bar to 10bar Control valve: 10-EVD 2/2401 Nominal width: G 1/4; DN5 Case material: Ms Sealing elements: NBR Magnetic drive: 3803 Electrical power: 18VA Protection class: IP65 Electrical connection: DIN EN 175301-803A with LED Approval: EC type test. according to EN 16678 Electrical voltage: 230 VAC Limit switch: 2 pieces mechanical Manufacturer: Schaltbau Type: S870 W1 G1R Contact: Silver Valve position: open/close Electrical connection: DIN VDE 0627/IEC 61984 Electrical voltage: 230 VAC Special: with measuring connection G 1/2 and locking screw. in the entrance and exit on both sides with air filter G 1/4
Uni Gerate - 1-4-EPVA 200H-4.02.32.66.99

Electro-pneumatic valve, normally closed-NC, class A, Type test certificate according to the Gas Appliances Ordinance EU/2016/426, test basis EN 161 Projekt: ZO058 Type: 1-4-EPVA 200H-4.02.32.66.99 Prod. Ident. No.: CE0085AQ0211 Pressure range: 0 - 1 bar Nominal diameter: DN 200 Flange connection: PN 10 Medium: natural gas Media temp.: -20°C to +60°C Ambient temp.: -20°C to +60°C Installation position: vertical or horizontal drive Case material: EN-JL1040 (GG25) Seat material 1.4571 Internal parts: St/Ms/Al/Stainless steel Sealing elements: NBR Spindle seal: lip ring P. drive: KA160 Control pressure: 4bar to 10bar Control valve: 10-EVD 2/2401 Nominal width: G 1/4; DN5 Case material: Ms Sealing elements: NBR Magnetic drive: 3803 Electrical power: 18VA Protection class: IP65 Electrical connection: DIN EN 175301-803A with LED Approval: EC type test. according to EN 16678 Electrical voltage: 230 VAC Limit switch: 2 pieces mechanical Manufacturer: Schaltbau Type: S870 W1 G1R Contact: Silver Valve position: open/close Electrical connection: DIN VDE 0627/IEC 61984 Electrical voltage: 230 VAC Special: with measuring connection G 1/2 and locking screw. in the entrance and exit on both sides with air filter G 1/4
Electro-pneumatic valve, normally closed-NC, class A, Type test certificate according to the Gas Appliances Ordinance EU/2016/426, test basis EN 161 AR069515 Type: 1-4-EPVA 200H-4.Z.00.32.66.99 Prod. Ident. No.: CE0085AQ0211 Pressure range: 0 - 1 bar Nominal diameter: DN 200 Flange connection: PN 10 Medium: ... Media temp.: -20°C to +60°C Ambient temp.: -20°C to +60°C Installation position: vertical or horizontal drive Case material: EN-JL1040 (GG25) Seat material 1.4571 Internal parts: St/Ms/Al/Stainless steel Sealing elements: NBR Spindle seal: lip ring P. drive: KA160 Control pressure: 4bar to 10bar Control valve: 10-EVD 2/2401 Nominal width: G 1/4; DN5 Case material: Ms Sealing elements: NBR Magnetic drive: 3803 Electrical power: 18VA Protection class: IP65 Electrical connection: DIN EN 175301-803A with LED Approval: EC type test. according to EN 16678 Electrical voltage: 230 VAC Limit switch: 2 pieces mechanical Manufacturer: Schaltbau Type: S870 W1 G1R Contact: Silver Valve position: open/close Electrical connection: DIN VDE 0627/IEC 61984 Electrical voltage: 230 VAC with hydraulic opening delay Special: with measuring connection G 1/2 and locking screw. in the entrance and exit on both sides with air filter G 1/4
Uni Gerate - 1-4-EPVA 200H-4.Z.00.32.66.99

Electro-pneumatic valve, normally closed-NC, class A, Type test certificate according to the Gas Appliances Ordinance EU/2016/426, test basis EN 161 AR069515 Type: 1-4-EPVA 200H-4.Z.00.32.66.99 Prod. Ident. No.: CE0085AQ0211 Pressure range: 0 - 1 bar Nominal diameter: DN 200 Flange connection: PN 10 Medium: ... Media temp.: -20°C to +60°C Ambient temp.: -20°C to +60°C Installation position: vertical or horizontal drive Case material: EN-JL1040 (GG25) Seat material 1.4571 Internal parts: St/Ms/Al/Stainless steel Sealing elements: NBR Spindle seal: lip ring P. drive: KA160 Control pressure: 4bar to 10bar Control valve: 10-EVD 2/2401 Nominal width: G 1/4; DN5 Case material: Ms Sealing elements: NBR Magnetic drive: 3803 Electrical power: 18VA Protection class: IP65 Electrical connection: DIN EN 175301-803A with LED Approval: EC type test. according to EN 16678 Electrical voltage: 230 VAC Limit switch: 2 pieces mechanical Manufacturer: Schaltbau Type: S870 W1 G1R Contact: Silver Valve position: open/close Electrical connection: DIN VDE 0627/IEC 61984 Electrical voltage: 230 VAC with hydraulic opening delay Special: with measuring connection G 1/2 and locking screw. in the entrance and exit on both sides with air filter G 1/4