Type of control : Direct controlled Spring Type : compression spring Adjustment range: 50 - 200 bar Reverse Current : Internal Seal materials : FKM Material : steel DRUCKBEREICH VON 50 - 200 BAR.
TRGD 05/3-0.6-200-FCV/R/K-4M0.75/MAG(10-G)/PTFE (BP:10001262 +0.75kW motor) pump unit Consisting of radial piston pump, intermediate flange Bellhousing and MAG clutch and motor pump data Level Number (Stars) : 1-Star theoretical delivery volume: 0.42 ccm/rev Direction of rotation : any Pressure connection : G3/8 Suction connection : G3/4 Vent : G1/4 Inlet pressure : 20 bar max. Operating pressure: 700 bar max. Type of sealing : via the can of the magnetic coupling Temperature : -30°C min. / +60°C max. materials Housing : 1.0570 chemically nickel-plated Shaft : stainless steel 1st Piston housing : 1.0503 nitrided Piston : nitrided steel + coating 3 Bearing : Cylindrical roller bearing with steel cage / spherical roller bearing Seal materials : PTFE drive motor Type : 4-pole three-phase motor Power : 0.75 kW Voltage : 230/400 V Speed : 1500 min-1 Degree of protection : IP55 Insulation class : F Shape : B35 Motor protection : 3 PTC thermistors Accesories MAG clutch : DST75/10-G Bellhousing : Standard motor hub intermediate flange side
Substitute for serial no. 1426670 Screw pump 20-30-T-G Material-Nr.: 115982 Bare shaft pump.
Storage Multi-layer plain bearing P10 product data Geometric delivery volume 321.00 cm³/r Direction of rotation clockwise (view of shaft end) Type of fastening flange KF 5/... Yes Line connection Flange connection KF 5/... - DN 75 Shaft end cylindrical ø 28mm integrated valve DKF valve 16, 8...16 bar Any installation position Specific Dates Operating pressure (suction side) -0.4...+10 bar max. operating pressure (pressure side) 16 bar (depending on viscosity, speed and drive power) Equipment temperature -20°C...+150°C Ambient temperature -20°C...+60°C Minimum viscosity 1.4 mm²/s (max. 3 bar) 6 mm²/s (max. 12 bar) 12 mm²/s (max. operating pressure) Maximum viscosity dependent on intake conditions, speed and drive power Speed range 200...2000 rpm (depending on pressure, viscosity and drive power)
Starter-Kit The CSD-25-1 Starter Kit contains the items to convert your existing pump to use the new diaphragms. Starter kits all contain 2 x new membranes, 2 x switching disks + 2 x screws
Spiral seal D 75 / 63.1x4.5 SPV1NG spiral seal Type : D75 / 63.1x4.5 SPV1NG spiral seal
Special motor 640W 1AC230V50Hz(16) IP55 n=1250 4.6A CLF TS #110238.17
Special motor 550W 1AC230V50Hz(14)IP55 n=1360 4.2A CLF TS #110827.02 with two cable glands PG9
SPARE PARTS SET R65 / 400 ... 630 FL-Z-NBR-P10 according to drawing RZ3-2803-401579 // 1 Position: 1,2,6,7,8,9,13,14,15 + 16 Net weight: 0.59kg / piece Customs tariff number: 84139100
SPARE PARTS SET R45 / 125 ... 200 FL-Z-NBR-P10 according to drawing RZ3-2803-401579 // 1 Position: 1,2,6,7,8,9,13,14,15 + 16 suitable for Gear pump R45 / 160 FL-Z-W-SAE2.1 / 2-R, 330028-2
Spare bare shaft pump with reference: 718537 Specific volume : 59.6 cm³/rev Body / Cover : Steel Shafts : tool steel X40 Bearing : NiAg Seal : Bearing lubricating flow discharged externally by Viscoseal Particularities: Spiroflex groove only on the outlet side 1x probe bore 1/2" - 20 UNF - 2B in the entrance 1x probe bore 1/2" - 20 UNF - 2B in the outlet Liquid temperature control, customer-specific Special storage for sensitive polymers
