Manufacturer: EBRO
Positioner type: EP501-R
Execution: single+double-acting
Control: (0)4-20 mA / 0-10 V
Feedback analogue: 4-20 mA
Digital feedback: 1x binary input + 2x binary output
IP degree of protection: IP65/IP67
Attachment: according to VDI/VDE 3845
Pneumatic connection: G1/4"
Electrical connection: M20
Safety position: vent
Housing: aluminum
Corrosion protection/colour: RAL 9005 powder-coated
Position indicator: mechanical + display
Mode of action: adjustable
Temperature range: 0°C to + 60°C
Control pressure range: up to 7 bar
Extension bridge, attachment kit, hoses,.. on site!
EU customs tariff number: 90328100
AL no.: X.A.I.001
Microprocessors, microcomputers and microcontrollers with the properties:
Clock frequency greater than 25 MHz
Memory circuits as follows:1. Electrically programmable and erasable
Read-only memories (EEPROMs) with a storage capacity of:
a) more than 16 Mbit/s per packet for flash memory types
Analog to digital converters having any of the following characteristics:
1. A resolution of 8 bits or more but less than 12 bits, with a
Output rate greater than 200 megasamples per second (MSPS),
are subject to an export ban according to the list of goods and technologies in accordance with Article 2a
Paragraph 1 and Article 2b Paragraph 1 of EU Regulation No. 2022/328 v. February 25, 2022 to amend Regulation No. 833/2014 on restrictive measures in the Russia - Ukraine conflict.
The goods are listed under No. X.A.I.001 a), b), c)
Ebro Armaturen - EP501-R

Manufacturer: EBRO Positioner type: EP501-R Execution: single+double-acting Control: (0)4-20 mA / 0-10 V Feedback analogue: 4-20 mA Digital feedback: 1x binary input + 2x binary output IP degree of protection: IP65/IP67 Attachment: according to VDI/VDE 3845 Pneumatic connection: G1/4" Electrical connection: M20 Safety position: vent Housing: aluminum Corrosion protection/colour: RAL 9005 powder-coated Position indicator: mechanical + display Mode of action: adjustable Temperature range: 0°C to + 60°C Control pressure range: up to 7 bar Extension bridge, attachment kit, hoses,.. on site! EU customs tariff number: 90328100 AL no.: X.A.I.001 Microprocessors, microcomputers and microcontrollers with the properties: Clock frequency greater than 25 MHz Memory circuits as follows:1. Electrically programmable and erasable Read-only memories (EEPROMs) with a storage capacity of: a) more than 16 Mbit/s per packet for flash memory types Analog to digital converters having any of the following characteristics: 1. A resolution of 8 bits or more but less than 12 bits, with a Output rate greater than 200 megasamples per second (MSPS), are subject to an export ban according to the list of goods and technologies in accordance with Article 2a Paragraph 1 and Article 2b Paragraph 1 of EU Regulation No. 2022/328 v. February 25, 2022 to amend Regulation No. 833/2014 on restrictive measures in the Russia - Ukraine conflict. The goods are listed under No. X.A.I.001 a), b), c)

Intermediate flange valve
Nominal size DN: 200
PN (bolt circle): PN 6/10/16 - EN 1092-1 / Class 150 - ASME B16.5
Housing material: EN-JS1030 (GGG40)
Overall length: DIN EN 558, GR 20
Coating System: CS3
Housing color: RAL 1028 melon yellow
Head / surface flange: F 07 - EN ISO 5211
Material of sleeve: NBR black
Design of the cuff: loose, without bevel
Material washer: 1.4408
Disc-shaft connection design: 2-corrugated, plugged
Operating pressure max .: 10.00 bar
Material shaft: 1.4104
Shaft end design: V = 17x20mm / L = 20mm
Shaft seal material: NBR
Material bearing: brass
Valve requirements (approval): DVGW - Gas
Pressure test: DIN EN 12266 - P10, P11, P12
Classification of pressure equipment directive: CE II
Type plate: for DVGW (version 1 gas)
+
EB 10.1 SYS
Pneumatic drive
Function: single-acting / spring-closing
Spring version: SYS60
Material shaft: 1.7131 (16MnCr5) Tenifer QPQ
Pneumatic connection: Namur G 1/4 "
Flange connection: F07 / F10 - EN ISO 5211
Shaft mount design: V = 17.00 mm
Temperature range: -20.00 ° C to + 80.00 ° C
Control medium: air
Pneumatic drive material: aluminum
Corrosion protection / color housing: black anodized
Layer thickness housing (approx.): 20-24 μm
Direction of actuation: Closing clockwise
Cover design: EBRO
Corrosion protection / cover color: RAL 2008 light red orange
Layer thickness lid (approx.): 60-80 μm
Stroke limitation: -8 ° / + 3 °
Seal / seal set: NBR
Connection / adapter block: Namur connection plate
Upper drive interface: AA2 80x30x30 mm
Installation direction: across the pipe axis
Ebro Armaturen - Z 011-A

Intermediate flange valve Nominal size DN: 200 PN (bolt circle): PN 6/10/16 - EN 1092-1 / Class 150 - ASME B16.5 Housing material: EN-JS1030 (GGG40) Overall length: DIN EN 558, GR 20 Coating System: CS3 Housing color: RAL 1028 melon yellow Head / surface flange: F 07 - EN ISO 5211 Material of sleeve: NBR black Design of the cuff: loose, without bevel Material washer: 1.4408 Disc-shaft connection design: 2-corrugated, plugged Operating pressure max .: 10.00 bar Material shaft: 1.4104 Shaft end design: V = 17x20mm / L = 20mm Shaft seal material: NBR Material bearing: brass Valve requirements (approval): DVGW - Gas Pressure test: DIN EN 12266 - P10, P11, P12 Classification of pressure equipment directive: CE II Type plate: for DVGW (version 1 gas) + EB 10.1 SYS Pneumatic drive Function: single-acting / spring-closing Spring version: SYS60 Material shaft: 1.7131 (16MnCr5) Tenifer QPQ Pneumatic connection: Namur G 1/4 " Flange connection: F07 / F10 - EN ISO 5211 Shaft mount design: V = 17.00 mm Temperature range: -20.00 ° C to + 80.00 ° C Control medium: air Pneumatic drive material: aluminum Corrosion protection / color housing: black anodized Layer thickness housing (approx.): 20-24 μm Direction of actuation: Closing clockwise Cover design: EBRO Corrosion protection / cover color: RAL 2008 light red orange Layer thickness lid (approx.): 60-80 μm Stroke limitation: -8 ° / + 3 ° Seal / seal set: NBR Connection / adapter block: Namur connection plate Upper drive interface: AA2 80x30x30 mm Installation direction: across the pipe axis

Intermediate flange valve
Nominal size DN: 20
PN (bolt circle): PN 10/16 - EN 1092-1
Housing material: EN-JS1030 (GGG40)
Overall length: DIN EN 558, GR 20
Coating System: CS3
Housing color: RAL 1028 melon yellow
Head / surface flange: F 04 - EN ISO 5211
Material of sleeve: NBR black
Design of the cuff: loose, without bevel
Material washer: 1.4408
Disc-shaft connection: 1-shaft, plugged
Operating pressure max .: 10.00 bar
Material shaft: 1.4104
Shaft end design: V = 11x13.5mm / L = 13.5mm
Shaft seal material: NBR
Material bearing: brass
Valve requirements (approval): DVGW - Gas
Pressure test: DIN EN 12266 - P10, P11, P12
Classification of the Pressure Equipment Directive: good engineering practice (Art. 3, Para. 3)
Type plate: for DVGW (version 1 gas)
+
Manufacturer: EBRO
Pneumatic drive type: EB 5.1 SYS
Function: single-acting / spring-closing
Spring version: SYS60
Material shaft: 1.7131 (16MnCr5) Tenifer QPQ
Pneumatic connection: Namur G 1/4 "
Flange connection: F 04 - EN ISO 5211
Shaft mount design: V = 11.00 mm
Temperature range: -20.00 ° C to + 80.00 ° C
Control medium: air
Pneumatic drive material: aluminum
Corrosion protection / color housing: black anodized
Layer thickness housing (approx.): 20-24 μm
Direction of actuation: Closing clockwise
Cover design: EBRO
Corrosion protection / cover color: RAL 2008 light red orange
Layer thickness lid (approx.): 60-80 μm
Stroke limitation: -8 ° / + 3 °
Seal / seal set: NBR
Connection / adapter block: Namur connection plate
Upper drive interface: AA2 80x30x30 mm
Installation direction: across the pipe axis
Ebro Armaturen - Z 011-A DN20

Intermediate flange valve Nominal size DN: 20 PN (bolt circle): PN 10/16 - EN 1092-1 Housing material: EN-JS1030 (GGG40) Overall length: DIN EN 558, GR 20 Coating System: CS3 Housing color: RAL 1028 melon yellow Head / surface flange: F 04 - EN ISO 5211 Material of sleeve: NBR black Design of the cuff: loose, without bevel Material washer: 1.4408 Disc-shaft connection: 1-shaft, plugged Operating pressure max .: 10.00 bar Material shaft: 1.4104 Shaft end design: V = 11x13.5mm / L = 13.5mm Shaft seal material: NBR Material bearing: brass Valve requirements (approval): DVGW - Gas Pressure test: DIN EN 12266 - P10, P11, P12 Classification of the Pressure Equipment Directive: good engineering practice (Art. 3, Para. 3) Type plate: for DVGW (version 1 gas) + Manufacturer: EBRO Pneumatic drive type: EB 5.1 SYS Function: single-acting / spring-closing Spring version: SYS60 Material shaft: 1.7131 (16MnCr5) Tenifer QPQ Pneumatic connection: Namur G 1/4 " Flange connection: F 04 - EN ISO 5211 Shaft mount design: V = 11.00 mm Temperature range: -20.00 ° C to + 80.00 ° C Control medium: air Pneumatic drive material: aluminum Corrosion protection / color housing: black anodized Layer thickness housing (approx.): 20-24 μm Direction of actuation: Closing clockwise Cover design: EBRO Corrosion protection / cover color: RAL 2008 light red orange Layer thickness lid (approx.): 60-80 μm Stroke limitation: -8 ° / + 3 ° Seal / seal set: NBR Connection / adapter block: Namur connection plate Upper drive interface: AA2 80x30x30 mm Installation direction: across the pipe axis