Kategoriler
Kit seals PA140A-LB5P40T30 H+DI Virgin PTFE
Csf Inox - KPA140LDGA30

Kit seals PA140A-LB5P40T30 H+DI Virgin PTFE
KIT MEC. SEALS+O-RINGS PUMP CASING SLR 1 SIC/SIC/EPDM FDA CE 1935/2004 3-A HS
Inoxpa - 8GD70-0124452

KIT MEC. SEALS+O-RINGS PUMP CASING SLR 1 SIC/SIC/EPDM FDA CE 1935/2004 3-A HS
KEYPAD CONTROLLER FOR M2B
Sterling - 601-00521-00

KEYPAD CONTROLLER FOR M2B
KCS80 Centrifugal pump AISI316L HS code: 84137051 TECHNICAL FEATURES | -------------------------------------- ------------ --------------------------- | INFORMATION CONVEYING MEDIUM: DESCRIPTION: SUCCO POMODORO GONFIO DA PASSATRICE MAX TEMPERATURE: 80 ° C MINIMUM TEMPERATURE: 75 ° C DENSITY: 1.05 kg / dm³ VISCOSITY: 10 CIRCA cP OPERATING POINT: FLOW RATE (1): 50 m³ / h CONVEYOR HEIGHT (1): 35 m OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------ ---------------------------- TYPE OF INSTALLATION: WITH MOTOR (B35) SUCTION FITTING: DIN 11851 DN100 EXTERNAL THREAD PRESSURE SOCKET: DIN 11851 DN80 EXTERNAL THREAD ALIGNMENT OF PRESSURE SOCKET: 165 ° (VENTILATION) MATERIAL PUMP: 1.4404 / 1.4409 (AISI 316L / CF3M) ELASTOMER PUMP: EPDM WHEEL: OPEN Ø FULL 310 MECHANICAL SEAL: SIMPLY INTERNAL WITH FORCED FLUSHING MECHANICAL SEAL MATERIAL: SLIDING SURFACES: SIC / CARBON ELASTOMERS: EPDM Country of origin: IT ITALY Same as S / N C113708
Csf Inox - CS 80-310-4-20/BM.§W82

KCS80 Centrifugal pump AISI316L HS code: 84137051 TECHNICAL FEATURES | -------------------------------------- ------------ --------------------------- | INFORMATION CONVEYING MEDIUM: DESCRIPTION: SUCCO POMODORO GONFIO DA PASSATRICE MAX TEMPERATURE: 80 ° C MINIMUM TEMPERATURE: 75 ° C DENSITY: 1.05 kg / dm³ VISCOSITY: 10 CIRCA cP OPERATING POINT: FLOW RATE (1): 50 m³ / h CONVEYOR HEIGHT (1): 35 m OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------ ---------------------------- TYPE OF INSTALLATION: WITH MOTOR (B35) SUCTION FITTING: DIN 11851 DN100 EXTERNAL THREAD PRESSURE SOCKET: DIN 11851 DN80 EXTERNAL THREAD ALIGNMENT OF PRESSURE SOCKET: 165 ° (VENTILATION) MATERIAL PUMP: 1.4404 / 1.4409 (AISI 316L / CF3M) ELASTOMER PUMP: EPDM WHEEL: OPEN Ø FULL 310 MECHANICAL SEAL: SIMPLY INTERNAL WITH FORCED FLUSHING MECHANICAL SEAL MATERIAL: SLIDING SURFACES: SIC / CARBON ELASTOMERS: EPDM Country of origin: IT ITALY Same as S / N C113708
KCS65 AISI316L TECHNICAL FEATURES | -------------------------------------- ------------------------- ----------------------------------------| INFORMATION FLOWING MEDIUM: DESCRIPTION: water SERVICE DESCRIPTION: Transfer MAX TEMPERATURE: 20°C DENSITY: 1 kg/dm³ VISCOSITY: 1 cP OPERATING CONDITIONS: INLET PRESSURE: INLET PRESENT OUTLET PRESSURE: 1.8 bar OPERATING POINT: FLOW RATE (1): 6 - 66 m³/h HEAD (1): 18 m OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------------------- ---------------------------- TYPE OF INSTALLATION: WITH MOTOR + WITH FLOOR FEET SUCTION PORT: DIN 11851 DN80 EXTERNAL THREAD PRESSURE NOZZLE: DIN 11851 DN65 MALE THREAD MATERIAL PUMP: 1.4404/1.4409 (AISI 316L/CF3M) ELASTOMER PUMP: EPDM (FDA) WHEEL: OPEN, TURNED Ø 140 mm MECHANICAL SEAL: SIMPLE INTERNAL MECHANICAL SEAL MATERIAL: SLIDING SURFACE: SIC/CARBON ELASTOMERS: EPDM CSF CODE: UNITS 3 X7X7KZ7(82) ELECTRIC MOTOR: MULTI-RANGE VOLTAGE IP55, IE3, CL. f SPEED: 2900RPM (50HZ) MOTOR POWER: 5.5 KW MOTOR VOLTAGE: 400/690V-380/660V-415/---V D/Y(STD) MOTOR PROTECTION: WITH PTC
Csf Inox - CS 65-145-2-7.5/BM.40T82

KCS65 AISI316L TECHNICAL FEATURES | -------------------------------------- ------------------------- ----------------------------------------| INFORMATION FLOWING MEDIUM: DESCRIPTION: water SERVICE DESCRIPTION: Transfer MAX TEMPERATURE: 20°C DENSITY: 1 kg/dm³ VISCOSITY: 1 cP OPERATING CONDITIONS: INLET PRESSURE: INLET PRESENT OUTLET PRESSURE: 1.8 bar OPERATING POINT: FLOW RATE (1): 6 - 66 m³/h HEAD (1): 18 m OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------------------- ---------------------------- TYPE OF INSTALLATION: WITH MOTOR + WITH FLOOR FEET SUCTION PORT: DIN 11851 DN80 EXTERNAL THREAD PRESSURE NOZZLE: DIN 11851 DN65 MALE THREAD MATERIAL PUMP: 1.4404/1.4409 (AISI 316L/CF3M) ELASTOMER PUMP: EPDM (FDA) WHEEL: OPEN, TURNED Ø 140 mm MECHANICAL SEAL: SIMPLE INTERNAL MECHANICAL SEAL MATERIAL: SLIDING SURFACE: SIC/CARBON ELASTOMERS: EPDM CSF CODE: UNITS 3 X7X7KZ7(82) ELECTRIC MOTOR: MULTI-RANGE VOLTAGE IP55, IE3, CL. f SPEED: 2900RPM (50HZ) MOTOR POWER: 5.5 KW MOTOR VOLTAGE: 400/690V-380/660V-415/---V D/Y(STD) MOTOR PROTECTION: WITH PTC
KCS40 centrifugal pump DUPLEX SAF2507 HS code: 84137051 TECHNICAL FEATURES | -------------------------------------- ------------------------- ----------------------------------------| INFORMATION FLOWING MEDIUM: FLUID (1): PRODUCT NOT SPECIFIED OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------------------- ---------------------------- TYPE OF INSTALLATION: WITHOUT MOTOR (B35) SUCTION COUPLING: DN50 FLANGE EN 1092-1, FORM A PRESSURE NOZZLE: DN40 FLANGE EN 1092-1, FORM A MATERIAL PUMP: DUPLEX SAF 2507(1.4410) ELASTOMER PUMP: FPM WHEEL: OPEN Ø FULL 210 MECHANICAL SEAL: DOUBLE EXTERNAL (BTB), FLUSHED FLUSHING LINE CONNECTION: 1/8" G MALE THREAD MECHANICAL SEAL MATERIAL: SLIDING SURFACE: TUC/TUC INT.+TUC/TUC INT. ELASTOMERS: FPM CSF CODE: UNIT.877S1 YRRYX-HX-YRRY(S1) ELECTRIC MOTOR: WITHOUT (CONSTRUCTION B35) SPEED: 1450RPM (50HZ) ENGINE POWER: 1.1 KW MOTOR VOLTAGE: UNKNOWN OPTIONAL: APPROVAL WITH OUR ENGINE
Csf Inox - CS 40-210-4-1.5/ED.LQS1

KCS40 centrifugal pump DUPLEX SAF2507 HS code: 84137051 TECHNICAL FEATURES | -------------------------------------- ------------------------- ----------------------------------------| INFORMATION FLOWING MEDIUM: FLUID (1): PRODUCT NOT SPECIFIED OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------------------- ---------------------------- TYPE OF INSTALLATION: WITHOUT MOTOR (B35) SUCTION COUPLING: DN50 FLANGE EN 1092-1, FORM A PRESSURE NOZZLE: DN40 FLANGE EN 1092-1, FORM A MATERIAL PUMP: DUPLEX SAF 2507(1.4410) ELASTOMER PUMP: FPM WHEEL: OPEN Ø FULL 210 MECHANICAL SEAL: DOUBLE EXTERNAL (BTB), FLUSHED FLUSHING LINE CONNECTION: 1/8" G MALE THREAD MECHANICAL SEAL MATERIAL: SLIDING SURFACE: TUC/TUC INT.+TUC/TUC INT. ELASTOMERS: FPM CSF CODE: UNIT.877S1 YRRYX-HX-YRRY(S1) ELECTRIC MOTOR: WITHOUT (CONSTRUCTION B35) SPEED: 1450RPM (50HZ) ENGINE POWER: 1.1 KW MOTOR VOLTAGE: UNKNOWN OPTIONAL: APPROVAL WITH OUR ENGINE
KCS40 centrifugal pump DUPLEX SAF2507 HS code: 84137051 TECHNICAL FEATURES | -------------------------------------- ------------------------- ----------------------------------------| INFORMATION FLOWING MEDIUM: FLUID (1): PRODUCT NOT SPECIFIED OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------------------- ---------------------------- TYPE OF INSTALLATION: WITHOUT MOTOR (B35) SUCTION COUPLING: DN50 FLANGE EN 1092-1, FORM A PRESSURE NOZZLE: DN40 FLANGE EN 1092-1, FORM A MATERIAL PUMP: DUPLEX SAF 2507(1.4410) ELASTOMER PUMP: FPM WHEEL: OPEN Ø FULL 210 MECHANICAL SEAL: DOUBLE EXTERNAL (BTB), FLUSHED FLUSHING LINE CONNECTION: 1/8" G MALE THREAD MECHANICAL SEAL MATERIAL: SLIDING SURFACE: TUC/TUC INT.+TUC/TUC INT. ELASTOMERS: FPM CSF CODE: UNIT.877S1 YRRYX-HX-YRRY(S1) ELECTRIC MOTOR: WITHOUT (CONSTRUCTION B35) SPEED: 1450RPM (50HZ) ENGINE POWER: 1.1 KW MOTOR VOLTAGE: UNKNOWN OPTIONAL: APPROVAL WITH OUR ENGINE | -------------------------------------- ------------------------- ---------------------------- EXPLANATION: CONFORMITY (ALL.II.A,2006/42/CEE) DOC.C.CE .. .. .. PUMP TECHNICAL DATA: PN MAX 10 BAR TMAX 100°C DOCUMENTS: INSTRUCTION MANUAL DOCICS CONFORMITY EC1935/2004 (FOOD CON.) DOC.C.IA SECTIONAL DRAWING WITH BOM LIST DOCA1920-1 MAINTENANCE INSTRUCTIONS FOR MECHANICAL RING DIC .. DOCA1 Same design as S/N C100175
Csf Inox - CS 40-210-4-1.5/ED.LQS1

KCS40 centrifugal pump DUPLEX SAF2507 HS code: 84137051 TECHNICAL FEATURES | -------------------------------------- ------------------------- ----------------------------------------| INFORMATION FLOWING MEDIUM: FLUID (1): PRODUCT NOT SPECIFIED OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------------------- ---------------------------- TYPE OF INSTALLATION: WITHOUT MOTOR (B35) SUCTION COUPLING: DN50 FLANGE EN 1092-1, FORM A PRESSURE NOZZLE: DN40 FLANGE EN 1092-1, FORM A MATERIAL PUMP: DUPLEX SAF 2507(1.4410) ELASTOMER PUMP: FPM WHEEL: OPEN Ø FULL 210 MECHANICAL SEAL: DOUBLE EXTERNAL (BTB), FLUSHED FLUSHING LINE CONNECTION: 1/8" G MALE THREAD MECHANICAL SEAL MATERIAL: SLIDING SURFACE: TUC/TUC INT.+TUC/TUC INT. ELASTOMERS: FPM CSF CODE: UNIT.877S1 YRRYX-HX-YRRY(S1) ELECTRIC MOTOR: WITHOUT (CONSTRUCTION B35) SPEED: 1450RPM (50HZ) ENGINE POWER: 1.1 KW MOTOR VOLTAGE: UNKNOWN OPTIONAL: APPROVAL WITH OUR ENGINE | -------------------------------------- ------------------------- ---------------------------- EXPLANATION: CONFORMITY (ALL.II.A,2006/42/CEE) DOC.C.CE .. .. .. PUMP TECHNICAL DATA: PN MAX 10 BAR TMAX 100°C DOCUMENTS: INSTRUCTION MANUAL DOCICS CONFORMITY EC1935/2004 (FOOD CON.) DOC.C.IA SECTIONAL DRAWING WITH BOM LIST DOCA1920-1 MAINTENANCE INSTRUCTIONS FOR MECHANICAL RING DIC .. DOCA1 Same design as S/N C100175
KCS40 centrifugal pump DUPLEX SAF2507 HS code: 84137051 TECHNICAL FEATURES | -------------------------------------- ------------------------- ----------------------------------------| INFORMATION FLOWING MEDIUM: FLUID (1): PRODUCT NOT SPECIFIED OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------------------- ---------------------------- INSTALLATION TYPE: WITH MOTOR (B35) SUCTION COUPLING: DN50 FLANGE EN 1092-1, FORM A PRESSURE NOZZLE: DN40 FLANGE EN 1092-1, FORM A MATERIAL PUMP: DUPLEX SAF 2507(1.4410) ELASTOMER PUMP: FPM WHEEL: OPEN Ø FULL 210 MECHANICAL SEAL: DOUBLE EXTERNAL (BTB), FLUSHED FLUSHING LINE CONNECTION: 1/8" G MALE THREAD MECHANICAL SEAL MATERIAL: SLIDING SURFACE: TUC/TUC INT.+TUC/TUC INT. ELASTOMERS: FPM CSF CODE: UNIT.877S1 YRRYX-HX-YRRY(S1) ELECTRIC MOTOR: MULTI-RANGE VOLTAGE IP55, IE3, CL. f SPEED: 1450RPM (50HZ) ENGINE POWER: 1.1 KW MOTOR VOLTAGE: 230/400V D/Y (STD) ±5% MOTOR PROTECTION: WITH PTC | -------------------------------------- ------------------------- ---------------------------- EXPLANATION: CONFORMITY (ALL.II.A,2006/42/CEE) DOC.C.CE .. .. .. PUMP TECHNICAL DATA: PN MAX 10 BAR TMAX 100°C
Csf Inox - Pos1.2 CS 40-210-4-1.5/ED.LQS1

KCS40 centrifugal pump DUPLEX SAF2507 HS code: 84137051 TECHNICAL FEATURES | -------------------------------------- ------------------------- ----------------------------------------| INFORMATION FLOWING MEDIUM: FLUID (1): PRODUCT NOT SPECIFIED OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------------------- ---------------------------- INSTALLATION TYPE: WITH MOTOR (B35) SUCTION COUPLING: DN50 FLANGE EN 1092-1, FORM A PRESSURE NOZZLE: DN40 FLANGE EN 1092-1, FORM A MATERIAL PUMP: DUPLEX SAF 2507(1.4410) ELASTOMER PUMP: FPM WHEEL: OPEN Ø FULL 210 MECHANICAL SEAL: DOUBLE EXTERNAL (BTB), FLUSHED FLUSHING LINE CONNECTION: 1/8" G MALE THREAD MECHANICAL SEAL MATERIAL: SLIDING SURFACE: TUC/TUC INT.+TUC/TUC INT. ELASTOMERS: FPM CSF CODE: UNIT.877S1 YRRYX-HX-YRRY(S1) ELECTRIC MOTOR: MULTI-RANGE VOLTAGE IP55, IE3, CL. f SPEED: 1450RPM (50HZ) ENGINE POWER: 1.1 KW MOTOR VOLTAGE: 230/400V D/Y (STD) ±5% MOTOR PROTECTION: WITH PTC | -------------------------------------- ------------------------- ---------------------------- EXPLANATION: CONFORMITY (ALL.II.A,2006/42/CEE) DOC.C.CE .. .. .. PUMP TECHNICAL DATA: PN MAX 10 BAR TMAX 100°C
KCS25 AISI316L TECHNICAL FEATURES | -------------------------------------- ------------------------- ----------------------------------------| INFORMATION FLOWING MEDIUM: DESCRIPTION: water SERVICE DESCRIPTION: Transfer MAX TEMPERATURE: 20°C DENSITY: 1 kg/dm³ VISCOSITY: 1 cP OPERATING CONDITIONS: INLET PRESSURE: INLET PRESENT OUTLET PRESSURE: 2.5 bar OPERATING POINT: FLOW RATE (1): 5 m³/h HEAD (1): 25 m OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------------------- ---------------------------- TYPE OF INSTALLATION: WITH MOTOR + WITH FLOOR FEET SUCTION PORT: DIN 11851 DN32 MALE THREAD PRESSURE NOZZLE: DIN 11851 DN25 MALE THREAD MATERIAL PUMP: 1.4404/1.4409 (AISI 316L/CF3M) ELASTOMER PUMP: EPDM (FDA) WHEEL: OPEN, TURNED Ø 140 mm MECHANICAL SEAL: SIMPLE INTERNAL MECHANICAL SEAL MATERIAL: SLIDING SURFACE: SIC/CARBON ELASTOMERS: EPDM CSF CODE: UNITS 3 X7X7KZ7(82) ELECTRIC MOTOR: MULTI-RANGE VOLTAGE IP55, IE3, CL. f SPEED: 2900RPM (50HZ) MOTOR POWER: 1.5 KW MOTOR VOLTAGE: 230/400V-220/380V-240/415V D/Y(STD) MOTOR PROTECTION: WITH PTC
Csf Inox - CS 25-145-2-2/BM.40T82

KCS25 AISI316L TECHNICAL FEATURES | -------------------------------------- ------------------------- ----------------------------------------| INFORMATION FLOWING MEDIUM: DESCRIPTION: water SERVICE DESCRIPTION: Transfer MAX TEMPERATURE: 20°C DENSITY: 1 kg/dm³ VISCOSITY: 1 cP OPERATING CONDITIONS: INLET PRESSURE: INLET PRESENT OUTLET PRESSURE: 2.5 bar OPERATING POINT: FLOW RATE (1): 5 m³/h HEAD (1): 25 m OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------------------- ---------------------------- TYPE OF INSTALLATION: WITH MOTOR + WITH FLOOR FEET SUCTION PORT: DIN 11851 DN32 MALE THREAD PRESSURE NOZZLE: DIN 11851 DN25 MALE THREAD MATERIAL PUMP: 1.4404/1.4409 (AISI 316L/CF3M) ELASTOMER PUMP: EPDM (FDA) WHEEL: OPEN, TURNED Ø 140 mm MECHANICAL SEAL: SIMPLE INTERNAL MECHANICAL SEAL MATERIAL: SLIDING SURFACE: SIC/CARBON ELASTOMERS: EPDM CSF CODE: UNITS 3 X7X7KZ7(82) ELECTRIC MOTOR: MULTI-RANGE VOLTAGE IP55, IE3, CL. f SPEED: 2900RPM (50HZ) MOTOR POWER: 1.5 KW MOTOR VOLTAGE: 230/400V-220/380V-240/415V D/Y(STD) MOTOR PROTECTION: WITH PTC
KCR08 Centrifugal pump AISI316L HS code: 84137051 TECHNICAL FEATURES | -------------------------------------- ------------ --------------------------- | INFORMATION CONVEYING MEDIUM: CONVEYOR MEDIUM (1): CRUSHED TOMATOES MAX TEMPERATURE: 85 ° C DENSITY: 1.05 kg / dm³ OPERATING POINT: FLOW RATE (1): 50 m³ / h CONVEYOR HEIGHT (1): 4-5 m OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------ ---------------------------- TYPE OF INSTALLATION: WITH MOTOR (B35) SUCTION FITTING: DIN 11851 DN80 EXTERNAL THREAD PRESSURE SOCKET: DIN 11851 DN80 EXTERNAL THREAD MATERIAL PUMP: 1.4404 / 1.4409 (AISI 316L / CF3M) ELASTOMER PUMP: EPDM WHEEL: DESIGN: SCREW-SHAPED IMPELLER MECHANICAL SEAL: DOUBLE EXTERNAL (BTB), FLUSHED CONNECTION FLUSHING LINE: 1/8 "G MALE THREAD MECHANICAL SEAL MATERIAL: SLIDING SURFACES: PROD .: TUC / TUC - ATMOS .: TUC / CARB ELASTOMERS: EPDM UNIT TYPE CSF CODE: 877 7R37X-HX-73V7-HX (72) ELECTRIC MOTOR: MULTIPLE RANGE VOLTAGE IP55, IE3, CL. F. SPEED: 1450 RPM (50HZ) MOTOR POWER: 3 KW MOTOR VOLTAGE: 230 / 400V D / Y (STD) ± 5% MOTOR PROTECTION: WITH PTC REMAINING DRAIN HOUSING: 1/4 "G FEMALE THREAD SPECIAL DESIGNS: + MOTOR FEET
Csf Inox - CR 80-4-4/BM.Q72

KCR08 Centrifugal pump AISI316L HS code: 84137051 TECHNICAL FEATURES | -------------------------------------- ------------ --------------------------- | INFORMATION CONVEYING MEDIUM: CONVEYOR MEDIUM (1): CRUSHED TOMATOES MAX TEMPERATURE: 85 ° C DENSITY: 1.05 kg / dm³ OPERATING POINT: FLOW RATE (1): 50 m³ / h CONVEYOR HEIGHT (1): 4-5 m OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------ ---------------------------- TYPE OF INSTALLATION: WITH MOTOR (B35) SUCTION FITTING: DIN 11851 DN80 EXTERNAL THREAD PRESSURE SOCKET: DIN 11851 DN80 EXTERNAL THREAD MATERIAL PUMP: 1.4404 / 1.4409 (AISI 316L / CF3M) ELASTOMER PUMP: EPDM WHEEL: DESIGN: SCREW-SHAPED IMPELLER MECHANICAL SEAL: DOUBLE EXTERNAL (BTB), FLUSHED CONNECTION FLUSHING LINE: 1/8 "G MALE THREAD MECHANICAL SEAL MATERIAL: SLIDING SURFACES: PROD .: TUC / TUC - ATMOS .: TUC / CARB ELASTOMERS: EPDM UNIT TYPE CSF CODE: 877 7R37X-HX-73V7-HX (72) ELECTRIC MOTOR: MULTIPLE RANGE VOLTAGE IP55, IE3, CL. F. SPEED: 1450 RPM (50HZ) MOTOR POWER: 3 KW MOTOR VOLTAGE: 230 / 400V D / Y (STD) ± 5% MOTOR PROTECTION: WITH PTC REMAINING DRAIN HOUSING: 1/4 "G FEMALE THREAD SPECIAL DESIGNS: + MOTOR FEET
KCH02 AISI316L TECHNICAL FEATURES | -------------------------------------- ------------------------- ----------------------------------------| INFORMATION FLOWING MEDIUM: DESCRIPTION: CIP Return SERVICE DESCRIPTION: Transfer MAX TEMPERATURE: 85°C DENSITY: 1 kg/dm³ VISCOSITY: 1 cP OPERATING CONDITIONS: INLET PRESSURE: INLET PRESENT OUTLET PRESSURE: 2.5 bar OPERATING POINT: FLOW RATE (1): 30 m³/h HEAD (1): 25 m OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------------------- ---------------------------- PUMP CHARACTERISTICS: SELF-PRIMING VERSION TYPE OF INSTALLATION: WITH MOTOR + WITH FLOOR FEET SUCTION PORT: DIN 11851 DN65 MALE THREAD PRESSURE NOZZLE: DIN 11851 DN50 MALE THREAD MATERIAL PUMP: 1.4404/1.4409 (AISI 316L/CF3M) ELASTOMER PUMP: EPDM (FDA) WHEEL: OPEN, TURNED Ø 168 mm MECHANICAL SEAL: SIMPLE INTERNAL MECHANICAL SEAL MATERIAL: SLIDING SURFACE: SIC/CARBON ELASTOMERS: EPDM CSF CODE: UNITS 3 X7X7KZ7(82) ELECTRIC MOTOR: MULTI-RANGE VOLTAGE IP55, IE3, CL. f SPEED: 2900RPM (50HZ) MOTOR POWER: 5.5 KW MOTOR VOLTAGE: 400/690V-380/660V-415/---V D/Y(STD) MOTOR PROTECTION: WITH PTC
Csf Inox - CNH 2-2-7.5/BM.68T82

KCH02 AISI316L TECHNICAL FEATURES | -------------------------------------- ------------------------- ----------------------------------------| INFORMATION FLOWING MEDIUM: DESCRIPTION: CIP Return SERVICE DESCRIPTION: Transfer MAX TEMPERATURE: 85°C DENSITY: 1 kg/dm³ VISCOSITY: 1 cP OPERATING CONDITIONS: INLET PRESSURE: INLET PRESENT OUTLET PRESSURE: 2.5 bar OPERATING POINT: FLOW RATE (1): 30 m³/h HEAD (1): 25 m OPERATION: WITHOUT FREQUENCY CONVERTER | -------------------------------------- ------------------------- ---------------------------- PUMP CHARACTERISTICS: SELF-PRIMING VERSION TYPE OF INSTALLATION: WITH MOTOR + WITH FLOOR FEET SUCTION PORT: DIN 11851 DN65 MALE THREAD PRESSURE NOZZLE: DIN 11851 DN50 MALE THREAD MATERIAL PUMP: 1.4404/1.4409 (AISI 316L/CF3M) ELASTOMER PUMP: EPDM (FDA) WHEEL: OPEN, TURNED Ø 168 mm MECHANICAL SEAL: SIMPLE INTERNAL MECHANICAL SEAL MATERIAL: SLIDING SURFACE: SIC/CARBON ELASTOMERS: EPDM CSF CODE: UNITS 3 X7X7KZ7(82) ELECTRIC MOTOR: MULTI-RANGE VOLTAGE IP55, IE3, CL. f SPEED: 2900RPM (50HZ) MOTOR POWER: 5.5 KW MOTOR VOLTAGE: 400/690V-380/660V-415/---V D/Y(STD) MOTOR PROTECTION: WITH PTC
in duplex SS, complete of base, coupling and el.motor, as per previous with s/n 724131. Excluded: anchor bolts, counter-flanges, motor sound-box.
Pompe Garbarino - Pump type “100 G-3”

in duplex SS, complete of base, coupling and el.motor, as per previous with s/n 724131. Excluded: anchor bolts, counter-flanges, motor sound-box.