"Ziehl Abegg" markasına ait modeller;
3~ 400V ±10% D/Y 50Hz P1 0.38/0.24kW 0.62/0.39A 1230/870/MIN COZY 0.88 IP54 THCL 155 ErP compliant 2015 with FU N=62.8 statA=48.2% VSD required Terminal box K02/N permanently installed on the motor. Circuit diagram: 1360-108XA Rating plate: 1x fixed, 1x loose. Installation position H/Vu/Vo. Motor protection: thermostat switch Operating mode: continuous operation with occasional Starts (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permitted. Continuous operation below -25 °C only with special ones Storage for cold applications possible on request. Moisture/tropical protection. Balancing quality G 6.3 Motor 1-layer paint RAL 7032 (pebble gray) in resistance class 1 (L-TI-0596) Impeller made of aluminum, unpainted Ball bearings with long-term greasing.
Type: RH40M-VDK.4C.1R

Ziehl Abegg
3~ 400V ±10% D/Y 50Hz P1 0.38/0.24kW 0.62/0.39A 1230/870/MIN COZY 0.88 IP54 THCL 155 ErP compliant 2015 with FU N=62.8 statA=48.2% VSD required Terminal box K02/N permanently installed on the motor. Circuit diagram: 1360-108XA Rating plate: 1x fixed, 1x loose. Installation position H/Vu/Vo. Motor protection: thermostat switch Operating mode: continuous operation with occasional Starts (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permitted. Continuous operation below -25 °C only with special ones Storage for cold applications possible on request. Moisture/tropical protection. Balancing quality G 6.3 Motor 1-layer paint RAL 7032 (pebble gray) in resistance class 1 (L-TI-0596) Impeller made of aluminum, unpainted Ball bearings with long-term greasing.
2320Nm3/min,0.49kW,400V,STEEL,2320rpm,470PA/620PA
RF22P-2DK.3F.5R

Ziehl Abegg
2320Nm3/min,0.49kW,400V,STEEL,2320rpm,470PA/620PA
209773 Double flow centrifugal fan with spiral housing. Type: RD28S-4DW.4R.2L 3~ 230/400V ±10% D/Y 50Hz P1 1.75kW 5.4/3.1A DI=0% 1130/MIN COZY 0.82PsF min.0PA 3~ 230/400V ±10% D/Y 60Hz P1 2.10kW 5.7/3.3A DI=0% 1330/MIN COZY 0.87PsF min.380PA 40°C 3~ 265/460V ±10% D/Y 60Hz P1 2.20kW 5.7/3.3A DI=0% 1420/MIN COZY 0.84PsF min.410PA 40°C IP54 thermal class 155 ErP compliant 2015 N=45.7 statA=39.2% Connection cable axial. 100 cm from the axle end. Wiring Diagram: 1360-106XB. Rating plate 1x fixed Installation position H Condensation water holes open Motor protection: thermostat switch Conveyor temperature min - 20 degrees Celsius Moisture-proof motor. Motor 1-layer paintwork in resistance class 1 (L-TI-0596) RAL 7032 (pebble grey) Impeller material: Impeller made of galvanized sheet metal Aluminum housing, unpainted Inlet nozzle made of unpainted aluminium cast with integrated engine mount Ball bearings with long-term greasing. Balancing quality G 6.3 Without mounting bracket.
RD28S-4DW.4R.2L

Ziehl Abegg
209773 Double flow centrifugal fan with spiral housing. Type: RD28S-4DW.4R.2L 3~ 230/400V ±10% D/Y 50Hz P1 1.75kW 5.4/3.1A DI=0% 1130/MIN COZY 0.82PsF min.0PA 3~ 230/400V ±10% D/Y 60Hz P1 2.10kW 5.7/3.3A DI=0% 1330/MIN COZY 0.87PsF min.380PA 40°C 3~ 265/460V ±10% D/Y 60Hz P1 2.20kW 5.7/3.3A DI=0% 1420/MIN COZY 0.84PsF min.410PA 40°C IP54 thermal class 155 ErP compliant 2015 N=45.7 statA=39.2% Connection cable axial. 100 cm from the axle end. Wiring Diagram: 1360-106XB. Rating plate 1x fixed Installation position H Condensation water holes open Motor protection: thermostat switch Conveyor temperature min - 20 degrees Celsius Moisture-proof motor. Motor 1-layer paintwork in resistance class 1 (L-TI-0596) RAL 7032 (pebble grey) Impeller material: Impeller made of galvanized sheet metal Aluminum housing, unpainted Inlet nozzle made of unpainted aluminium cast with integrated engine mount Ball bearings with long-term greasing. Balancing quality G 6.3 Without mounting bracket.
1P, 230V, 50Hz, P1, 680W, 3.1A, DI=%5, 870rpm, 12Uf/400V
THCL 155, IP54

Ziehl Abegg
1P, 230V, 50Hz, P1, 680W, 3.1A, DI=%5, 870rpm, 12Uf/400V
180696 ZAplus axial fan with sickled blades and square wall ring plate. ZAplus Ontop ECblue Type:ZN091-ZIQ.GL.V5P1 MK152-0008 UL Listed Product E213826 ZB-155 3~ 380-480V 50/60Hz P1 3.20kW 5.2-4.2A 1100 RPM 55°C IP55, THCL 155 IE5 ECblue BASIC MODBUS ErP compliant 2015 N=65.3 statA=62.0% VSD integrated integrated controller Connection plan: AP00001C ECblue BASIC-MODBUS Rating plate: 2x fixed. Data matrix code 1x loose in the controller Information sign 1x fixed. Installation position H/Vu/Vo. Motor protection: integrated active temperature management Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -35 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum impeller. Stator unpainted Rotor 1-layer paint RAL 5002 (ultramarine blue) in resistance class 1 (L-TI-0596) Wings unpainted Wall ring unpainted black Protective grille powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). ring grid Protective grille on the outlet side supplied loose Fastening parts supplied loose in the accessory bag Replacement for Item 165016! 2nd generation ! Net weight per unit: 48.6000 Commodity number: 8414 59 25
ZN091-ZIQ.GL.V5P1

Ziehl Abegg
180696 ZAplus axial fan with sickled blades and square wall ring plate. ZAplus Ontop ECblue Type:ZN091-ZIQ.GL.V5P1 MK152-0008 UL Listed Product E213826 ZB-155 3~ 380-480V 50/60Hz P1 3.20kW 5.2-4.2A 1100 RPM 55°C IP55, THCL 155 IE5 ECblue BASIC MODBUS ErP compliant 2015 N=65.3 statA=62.0% VSD integrated integrated controller Connection plan: AP00001C ECblue BASIC-MODBUS Rating plate: 2x fixed. Data matrix code 1x loose in the controller Information sign 1x fixed. Installation position H/Vu/Vo. Motor protection: integrated active temperature management Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -35 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum impeller. Stator unpainted Rotor 1-layer paint RAL 5002 (ultramarine blue) in resistance class 1 (L-TI-0596) Wings unpainted Wall ring unpainted black Protective grille powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). ring grid Protective grille on the outlet side supplied loose Fastening parts supplied loose in the accessory bag Replacement for Item 165016! 2nd generation ! Net weight per unit: 48.6000 Commodity number: 8414 59 25
177695 Axial fan with variable blade connection for pipe sockets. 3~ 230/400V ±10% D/Y 50Hz P1 2.30kW 7.3/4.2A DI=10% 1340/MIN COZY 0.78 60°C IP54 THCL 155 ErP compliant 2015 N=49.1 statA=44.8% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-106XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Conveyor temperature min - 40 degrees Celsius Moisture and tropical protection. Ball bearing with cold grease.. With ball bearing 2RS. Aluminum wings. Stator unpainted Rotor unpainted Wings unpainted Motor mount powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). ring grid All fasteners made of stainless steel
Type:VR080-4DI.6N.V5L

Ziehl Abegg
177695 Axial fan with variable blade connection for pipe sockets. 3~ 230/400V ±10% D/Y 50Hz P1 2.30kW 7.3/4.2A DI=10% 1340/MIN COZY 0.78 60°C IP54 THCL 155 ErP compliant 2015 N=49.1 statA=44.8% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-106XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Conveyor temperature min - 40 degrees Celsius Moisture and tropical protection. Ball bearing with cold grease.. With ball bearing 2RS. Aluminum wings. Stator unpainted Rotor unpainted Wings unpainted Motor mount powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). ring grid All fasteners made of stainless steel
156916 Axial fan with sickled blades and short nozzle wire support grid (cold). Type:FN050-VDK.4I.V7P1 3~ 400V ±10% D/Y 50Hz P1 0.77/0.49kW 1.7/0.84A DI=0% 1300/1025/MIN COZY 0.64 70°C 3~ 400V ±10% D/Y 60Hz P1 1.10/0.60kW 3~ 460V ±10% D/Y 60Hz P1 1.20/0.70kW 2.0/1.05A DI=0% 1480/1100/MIN COZY 0.76 70°C IP54 THCL 155 ErP compliant 2015 N=40.7 statA=33.4% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum wings. Fan 1-layer paint finish RAL 9005 (jet black) in resistance class 1 (L-TI-0596) ring grid
FN050-VDK.4I.V7P1

Ziehl Abegg
156916 Axial fan with sickled blades and short nozzle wire support grid (cold). Type:FN050-VDK.4I.V7P1 3~ 400V ±10% D/Y 50Hz P1 0.77/0.49kW 1.7/0.84A DI=0% 1300/1025/MIN COZY 0.64 70°C 3~ 400V ±10% D/Y 60Hz P1 1.10/0.60kW 3~ 460V ±10% D/Y 60Hz P1 1.20/0.70kW 2.0/1.05A DI=0% 1480/1100/MIN COZY 0.76 70°C IP54 THCL 155 ErP compliant 2015 N=40.7 statA=33.4% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum wings. Fan 1-layer paint finish RAL 9005 (jet black) in resistance class 1 (L-TI-0596) ring grid
153975 Axial fan with sickle-shaped blades and square wall ring plate. Type: FN080-SDQ.6N.V7 Fan Type DOE: Axial panel fan 3~ 400V D/Y 50Hz P1 1.80/1.15kW 3.9/2.2A DI=5% 900/700/MIN COSY 0.68 65°C IP54 THCL 155 ErP compliant 2015 N=41.5 statA=36.8% Terminal box K62 fixed to stator. Circuit diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Operating mode: continuous operation with occasional starts (S1) according to DIN EN 60034-1:2011-02 Occasional start-ups between -40 °C and -25 °C are permitted Continuous operation below -25 °C only possible with special bearings for cold applications on request. Humidity and tropical protection. Ball bearings with long-term lubrication. Blades made of aluminum. Fan 1-layer paint RAL 9005 (jet black) in resistance class 1 (L-TI-0596) Ring grille
FN080-SDQ.6N.V7

Ziehl Abegg
153975 Axial fan with sickle-shaped blades and square wall ring plate. Type: FN080-SDQ.6N.V7 Fan Type DOE: Axial panel fan 3~ 400V D/Y 50Hz P1 1.80/1.15kW 3.9/2.2A DI=5% 900/700/MIN COSY 0.68 65°C IP54 THCL 155 ErP compliant 2015 N=41.5 statA=36.8% Terminal box K62 fixed to stator. Circuit diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Operating mode: continuous operation with occasional starts (S1) according to DIN EN 60034-1:2011-02 Occasional start-ups between -40 °C and -25 °C are permitted Continuous operation below -25 °C only possible with special bearings for cold applications on request. Humidity and tropical protection. Ball bearings with long-term lubrication. Blades made of aluminum. Fan 1-layer paint RAL 9005 (jet black) in resistance class 1 (L-TI-0596) Ring grille
141725
FN063-6EK.4I.V7P1

Ziehl Abegg
141725
138757 - Axial fan with sickled blades and protective basket 3~ 400V D/Y 50Hz P1 1.80/1.15kW 3.9/2.2A DI=5% 900/700/MIN COZY 0.68 65°C IP54 THCL 155 ErP compliant 2015 N=41.5 statA=36.8% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is Continuous operation below -25 °C only possible with special bearings for cold applications on request. Moisture and tropical protection. Ball bearings with long-term greasing. Aluminum wings. Stator unpainted Rotor unpainted Wings unpainted Motor mount powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). ring grid All fasteners made of stainless steel.
FN080-SDS.6N.V7

Ziehl Abegg
138757 - Axial fan with sickled blades and protective basket 3~ 400V D/Y 50Hz P1 1.80/1.15kW 3.9/2.2A DI=5% 900/700/MIN COZY 0.68 65°C IP54 THCL 155 ErP compliant 2015 N=41.5 statA=36.8% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is Continuous operation below -25 °C only possible with special bearings for cold applications on request. Moisture and tropical protection. Ball bearings with long-term greasing. Aluminum wings. Stator unpainted Rotor unpainted Wings unpainted Motor mount powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). ring grid All fasteners made of stainless steel.
135711 Axial fan with sheet metal blades and short nozzle wire support grid (cold). Type:FB063-VDK.4M.V4L 3~ 400V ±10% D/Y 50Hz P1 1,10/0,65kW 2,2/1,25A DI=0% 1300/910/MIN COSY 0,72 60°C IP54 THCL 155 **ONLY IN SHORT NOZZLE ErP compliant 2015 N=44.7 statA=38.5% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum wings. Stator unpainted Rotor unpainted Wings unpainted Motor mount powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). All fasteners made of stainless steel.
FB063-VDK.4M.V4L

Ziehl Abegg
135711 Axial fan with sheet metal blades and short nozzle wire support grid (cold). Type:FB063-VDK.4M.V4L 3~ 400V ±10% D/Y 50Hz P1 1,10/0,65kW 2,2/1,25A DI=0% 1300/910/MIN COSY 0,72 60°C IP54 THCL 155 **ONLY IN SHORT NOZZLE ErP compliant 2015 N=44.7 statA=38.5% Terminal box K62 permanently mounted on the stator. Wiring Diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Moisture and tropical protection. Ball bearings with long-term greasing.. Aluminum wings. Stator unpainted Rotor unpainted Wings unpainted Motor mount powder-coated RAL 9005 (jet black) in resistance class 2 (L-TI-0585). All fasteners made of stainless steel.
124379E Single-flow motor fan wheel with backward-curved blades 3~ 400V ±10% D/Y 50Hz P1 2.20/1.55kW 4.0/2.6A DI=15% 1350/1090/MIN COZY 0.80 60°C IP54 THCL 155 ErP compliant 2013 N=58.1 statA=50.9% Terminal box K08 permanently installed on the motor. Wiring diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Operating mode: continuous operation with occasional Starts (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permitted. Continuous operation below -25 °C only with special ones Storage for cold applications possible on request. Moisture/tropical protection. Balancing quality G 6.3 Motor 1-layer paint RAL 7032 (pebble gray) in resistance class 1 (L-TI-0596) Impeller made of aluminum, unpainted Ball bearings with long-term greasing.
RH56M-VDK.6N.1R

Ziehl Abegg
124379E Single-flow motor fan wheel with backward-curved blades 3~ 400V ±10% D/Y 50Hz P1 2.20/1.55kW 4.0/2.6A DI=15% 1350/1090/MIN COZY 0.80 60°C IP54 THCL 155 ErP compliant 2013 N=58.1 statA=50.9% Terminal box K08 permanently installed on the motor. Wiring diagram: 1360-108XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Operating mode: continuous operation with occasional Starts (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permitted. Continuous operation below -25 °C only with special ones Storage for cold applications possible on request. Moisture/tropical protection. Balancing quality G 6.3 Motor 1-layer paint RAL 7032 (pebble gray) in resistance class 1 (L-TI-0596) Impeller made of aluminum, unpainted Ball bearings with long-term greasing.
1~ 230V 50Hz P1 290W 1.24A DI=0% 2250/MIN 8uF/400V 45°C THCL 155 IP44 depending on installation and position according to EN 60034-5 ErP compliant no Capacitor not included Connection cable variable 45cm. Without schematic sandwich label Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Balancing quality G 6.3 Condensation drain holes in the stator and rotor are open Stator unpainted Rotor painted RAL 5002 (ultramarine blue) Impeller made of sheet steel, galvanized, unpainted Impeller pressed onto rotor Ball bearings with long-term greasing.
RH28L-2EP.WD.1R 113045

Ziehl Abegg
1~ 230V 50Hz P1 290W 1.24A DI=0% 2250/MIN 8uF/400V 45°C THCL 155 IP44 depending on installation and position according to EN 60034-5 ErP compliant no Capacitor not included Connection cable variable 45cm. Without schematic sandwich label Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Balancing quality G 6.3 Condensation drain holes in the stator and rotor are open Stator unpainted Rotor painted RAL 5002 (ultramarine blue) Impeller made of sheet steel, galvanized, unpainted Impeller pressed onto rotor Ball bearings with long-term greasing.
MK106-4DK.07.Y

Ziehl Abegg
RE25P-4DK.4F.1R

Ziehl Abegg
RF22P-2DK.3F.5R

Ziehl Abegg
T224190 / TR250

Ziehl Abegg
31555681

Ziehl Abegg
131510

Ziehl Abegg
RE28P4EK3F411R 230V 50HZ 0.69KW

Ziehl Abegg