"Sic Marking" markasına ait modeller;
Battery operated marking gun for wireless marking in industrial environments Handheld device with a pistol-shaped handle with a start button integrated in the handle Rubberized front plate for position fixing with V recess Label area 60 x 25 mm Electromagnetic needle assembly with embossing needle made of hard metal. Length 60 mm Embossing up to 62 HRC material hardness possible Max. 5 mm height compensation, depending on the embossing force Noise level 76 dB (measured at medium embossing force and speed on sheet steel) Weight 3.2 kg, power 40 watts Battery life 1 to 4 hours Batteries 2 pieces (18V, 3.0AH, Li-ion), quick charge batteries, quick charger (approx. 1 hour) integrated control unit Integrated membrane keyboard, high-resolution color display (240x320 pixels) USB / Mini USB interface to the PC, data, updates 100 MB memory Embossing logos (PC software for logo creation available separately) Preview and simulation of the embossing Delivery in a practical transport case
E-Mark

Sic Marking
Battery operated marking gun for wireless marking in industrial environments Handheld device with a pistol-shaped handle with a start button integrated in the handle Rubberized front plate for position fixing with V recess Label area 60 x 25 mm Electromagnetic needle assembly with embossing needle made of hard metal. Length 60 mm Embossing up to 62 HRC material hardness possible Max. 5 mm height compensation, depending on the embossing force Noise level 76 dB (measured at medium embossing force and speed on sheet steel) Weight 3.2 kg, power 40 watts Battery life 1 to 4 hours Batteries 2 pieces (18V, 3.0AH, Li-ion), quick charge batteries, quick charger (approx. 1 hour) integrated control unit Integrated membrane keyboard, high-resolution color display (240x320 pixels) USB / Mini USB interface to the PC, data, updates 100 MB memory Embossing logos (PC software for logo creation available separately) Preview and simulation of the embossing Delivery in a practical transport case
needle 100mm/90° Material: carbide Diameter: 4mm Length: 100mm Bevel: 90 °
1120014

Sic Marking
needle 100mm/90° Material: carbide Diameter: 4mm Length: 100mm Bevel: 90 °
4300434 includes: 3200009A solenoid 1120013 embossing needle 60 mm / 90 ° 2120006 needle spring 1120047 coil core 1120174 guide sleeve
Needle Assembly E1 / E9 80mm / 90 °

Sic Marking
4300434 includes: 3200009A solenoid 1120013 embossing needle 60 mm / 90 ° 2120006 needle spring 1120047 coil core 1120174 guide sleeve
2290076 wireless transmission via Bluetooth reads 1D and 2D codes with lighting including dongle Color: Black +DL-AMA-42503 Scanner USB Netzteil +SW-000120 Programmierung BCR USB-Variable BCR e1/e10 The content is transferred to the variable "BCR" of our controller. Attention! The scanner cannot then be operated on another controller or PC.
Bar-Code-Lesesystem 2d Bluetooth

Sic Marking
2290076 wireless transmission via Bluetooth reads 1D and 2D codes with lighting including dongle Color: Black +DL-AMA-42503 Scanner USB Netzteil +SW-000120 Programmierung BCR USB-Variable BCR e1/e10 The content is transferred to the variable "BCR" of our controller. Attention! The scanner cannot then be operated on another controller or PC.
Solenoid coil assembly i53,i83,i143,c153/c303 Connector: MOLEX incl. coil core 1120026
4100399

Sic Marking
Solenoid coil assembly i53,i83,i143,c153/c303 Connector: MOLEX incl. coil core 1120026
PVDF body
Dosing Pump: 50 liters/min; Pneumatic diaphragm;

Sic Marking
PVDF body
P63
3100435

Sic Marking
P63
Needle spring D6
2120129

Sic Marking
Needle spring D6
NEEDLE SPRING. 0,45 x 5,5 x 32,5 mm
2120006

Sic Marking
NEEDLE SPRING. 0,45 x 5,5 x 32,5 mm
Needle marking system e10-p123-40 For the efficient and permanent labeling of your products of all kinds made of metal, plastic, wood, etc. The marking system is characterized above all by its robust and industrial design according to the following specification: Marking head Hand tool with handle in pistol shape X-axis with linear guide and ball-bearing slide, drive via Rack, Y-axis swivel drive via rack rubberized front plate for position fixation with V recess and Quick setting for workpiece distance Labeling area 120 x 40 mm, LED lighting Electromagnetic needle drive with needle guide and 100 mm marking needle made of hard metal Embossing up to 62 HRC material hardness possible max. 5 mm height adjustment, depending on the embossing force Noise development 76 dB (measured at medium stamping force and speed on sheet steel) 7.5 m control cable to the control unit with cable bend protection Weight 3.7 kg Control unit Integrated membrane keyboard, high-resolution color display (480x272 pixels) USB interface, special USB driver is required RS 232 and RS 422 interface Ethernet and gateway for Profibus optional Signal exchange via potential-free contacts, start / stop unit Weight 5.0 kg software Font height adjustable from 0.5 to 25 mm Dot matrix: 5x7 and 9x13 points per character, variably adjustable point spacings from 0.05 to 1.0 mm linear, circular and angular labeling Multi-line labeling possible in an embossing file inverted and mirror writing Fonts OCR, OCR-A, Arial and Courier Serial numbers in ascending and descending order, time variables, shifts Data Matrix marking (ECC200), Embossing of logos (PC software for logo creation available separately) Preview and simulation of the embossing up to 2000 embossed files programmable Call of 63 programmed files BCD coded Serial communication in ASCII protocol, text protocol and binary protocol
E10-P123-40

Sic Marking
Needle marking system e10-p123-40 For the efficient and permanent labeling of your products of all kinds made of metal, plastic, wood, etc. The marking system is characterized above all by its robust and industrial design according to the following specification: Marking head Hand tool with handle in pistol shape X-axis with linear guide and ball-bearing slide, drive via Rack, Y-axis swivel drive via rack rubberized front plate for position fixation with V recess and Quick setting for workpiece distance Labeling area 120 x 40 mm, LED lighting Electromagnetic needle drive with needle guide and 100 mm marking needle made of hard metal Embossing up to 62 HRC material hardness possible max. 5 mm height adjustment, depending on the embossing force Noise development 76 dB (measured at medium stamping force and speed on sheet steel) 7.5 m control cable to the control unit with cable bend protection Weight 3.7 kg Control unit Integrated membrane keyboard, high-resolution color display (480x272 pixels) USB interface, special USB driver is required RS 232 and RS 422 interface Ethernet and gateway for Profibus optional Signal exchange via potential-free contacts, start / stop unit Weight 5.0 kg software Font height adjustable from 0.5 to 25 mm Dot matrix: 5x7 and 9x13 points per character, variably adjustable point spacings from 0.05 to 1.0 mm linear, circular and angular labeling Multi-line labeling possible in an embossing file inverted and mirror writing Fonts OCR, OCR-A, Arial and Courier Serial numbers in ascending and descending order, time variables, shifts Data Matrix marking (ECC200), Embossing of logos (PC software for logo creation available separately) Preview and simulation of the embossing up to 2000 embossed files programmable Call of 63 programmed files BCD coded Serial communication in ASCII protocol, text protocol and binary protocol
Needle marking system e10-c153 For efficient and permanent marking of all types of products made of metal, plastic, wood, etc. The marking system is characterized above all by its robust and industrial design in accordance with the following specification: Marking head Completely mounted on a machine stand with height adjustment via a handwheel, height adjustment 270 mm with 60 mm embossing needle, Display via an integrated column counter, LED lighting of the work surface, Rack drives with linear guides and ball-bearing slides Labeling area 160 x 100 mm Electromagnetic needle drive with needle guide and 60 mm embossing needle made of hard metal Embossing up to 62 HRC material hardness possible Max. 5 mm height compensation, depending on the embossing force Noise development 76 dB (measured with medium embossing force and speed on sheet steel) 2.5 m control cable to the control unit, weight 28 Kg Control unit Integrated membrane keyboard, high-resolution color display (480x272 pixels) USB interface, special USB driver is required RS 232 and RS 422 interface, USB connection Ethernet and gateway for Profibus optional Signal exchange via potential-free contacts, start / stop unit Software Font height adjustable from 0.5 to 100 mm Dot matrix: 5x7 and 9x13 dots per character and variably adjustable dot spacing from 0.05 to 1.0 mm Straight, circular and angular labeling Multi-line labeling possible in one embossing file Inverted and mirror writing Fonts OCR, OCR-A, Arial and Courier and others Serial numbers ascending and descending, time variables, layers Data Matrix marking (ECC200), Embossing of logos (PC software for logo creation available separately) Preview and simulation of embossing Up to 2000 embossing files programmable Calling of 63 programmed files BCD coded Serial communication in ASCII protocol, text protocol and binary protocol
E10-C153

Sic Marking
Needle marking system e10-c153 For efficient and permanent marking of all types of products made of metal, plastic, wood, etc. The marking system is characterized above all by its robust and industrial design in accordance with the following specification: Marking head Completely mounted on a machine stand with height adjustment via a handwheel, height adjustment 270 mm with 60 mm embossing needle, Display via an integrated column counter, LED lighting of the work surface, Rack drives with linear guides and ball-bearing slides Labeling area 160 x 100 mm Electromagnetic needle drive with needle guide and 60 mm embossing needle made of hard metal Embossing up to 62 HRC material hardness possible Max. 5 mm height compensation, depending on the embossing force Noise development 76 dB (measured with medium embossing force and speed on sheet steel) 2.5 m control cable to the control unit, weight 28 Kg Control unit Integrated membrane keyboard, high-resolution color display (480x272 pixels) USB interface, special USB driver is required RS 232 and RS 422 interface, USB connection Ethernet and gateway for Profibus optional Signal exchange via potential-free contacts, start / stop unit Software Font height adjustable from 0.5 to 100 mm Dot matrix: 5x7 and 9x13 dots per character and variably adjustable dot spacing from 0.05 to 1.0 mm Straight, circular and angular labeling Multi-line labeling possible in one embossing file Inverted and mirror writing Fonts OCR, OCR-A, Arial and Courier and others Serial numbers ascending and descending, time variables, layers Data Matrix marking (ECC200), Embossing of logos (PC software for logo creation available separately) Preview and simulation of embossing Up to 2000 embossing files programmable Calling of 63 programmed files BCD coded Serial communication in ASCII protocol, text protocol and binary protocol
Needle D6 60mm/90°
1120238

Sic Marking
Needle D6 60mm/90°
Needle D6 60 mm/90° Material: Carbide Customs tariff number: 82073010 Diameter: 6 mm Weight 31 g Length: 60 mm Country of origin France Grind: 90°
1120238

Sic Marking
Needle D6 60 mm/90° Material: Carbide Customs tariff number: 82073010 Diameter: 6 mm Weight 31 g Length: 60 mm Country of origin France Grind: 90°
needle 60 mm/90° Material: Carbide Diameter: 4mm Weight 14 g Length: 60 mm bevel: 90°
1120012 - needle 60 mm/90°

Sic Marking
needle 60 mm/90° Material: Carbide Diameter: 4mm Weight 14 g Length: 60 mm bevel: 90°
Nadelmarkiersystem ec1 The column-based needle marking system ec1 marks workpieces using electromagnetic needle marking technology. This process enables reliable and unchangeable marking directly into the surface of the material. Specifications: Combined device with column mechanics and controller. High-quality red plastic housing cover. Smooth column adjustment handle. Steel column with position scale for precise setting of the workpiece distance. Motion control via racks and gears. Stepper motors control the movement of the needle. Embossing needle (length 80mm 90°, carbide) driven by an electromagnet. All electric, no compressed air required. Modern user guidance and intuitive software. On/off switch to trigger the marking cycle Additional USB port. Further data: · Marking window: 120 x 100 mm Dimensions: 311 x 300 x 635mm Weight: 16kg control unit Integrated membrane keyboard, graphic display USB interface, special USB driver is required RS 232 interface software Font height adjustable from 0.5 to 25 mm Dot matrix: 5x7 and 9x13 dots per character as well as variably adjustable Dot spacing from 0.22 to 1.0 mm rectilinear, circle and angle annotation multi-line labeling possible in one embossing file Fonts OCR, OCR-A, Arial and Courier serial numbers, time variables Data Matrix marking (ECC200), embossing of logos Preview and simulation of the embossing up to 500 embossing files programmable
EC1

Sic Marking
Nadelmarkiersystem ec1 The column-based needle marking system ec1 marks workpieces using electromagnetic needle marking technology. This process enables reliable and unchangeable marking directly into the surface of the material. Specifications: Combined device with column mechanics and controller. High-quality red plastic housing cover. Smooth column adjustment handle. Steel column with position scale for precise setting of the workpiece distance. Motion control via racks and gears. Stepper motors control the movement of the needle. Embossing needle (length 80mm 90°, carbide) driven by an electromagnet. All electric, no compressed air required. Modern user guidance and intuitive software. On/off switch to trigger the marking cycle Additional USB port. Further data: · Marking window: 120 x 100 mm Dimensions: 311 x 300 x 635mm Weight: 16kg control unit Integrated membrane keyboard, graphic display USB interface, special USB driver is required RS 232 interface software Font height adjustable from 0.5 to 25 mm Dot matrix: 5x7 and 9x13 dots per character as well as variably adjustable Dot spacing from 0.22 to 1.0 mm rectilinear, circle and angle annotation multi-line labeling possible in one embossing file Fonts OCR, OCR-A, Arial and Courier serial numbers, time variables Data Matrix marking (ECC200), embossing of logos Preview and simulation of the embossing up to 500 embossing files programmable
Nadelmarkiersystem e10-i53 For rational and permanent marking of all kinds of products. The marking system is compact at the same time robust and suitable for industrial use. Execution according to the following specification: Marking head for installation or integration into a production system Integration possible across 4 mounting surfaces completely encapsulated against dirt, leather cover in the needle assembly area Labeling area 50 x 20 mm Needle drive electromagnetic with needle guide and 60 mm embossing needle made of carbide Embossing up to 62 HRC material hardness possible max. 5 mm height compensation, depending on the embossing force Noise development 76 dB (measured at medium embossing force and speed on sheet steel) 5 m robotic cable to the control unit Protection class IP 40 Weight 2.7 kg Control unit Integrated membrane keyboard, high-resolution color display (480x272 pixels) USB interface, special USB driver is required RS 232 and RS 422 interface, USB connection Ethernet and gateway for Profibus optional Signal exchange via potential-free contacts, start/stop unit Protection class IP 40 Weight 5.0kg software Font height adjustable from 0.5 to 20 mm Dot matrix: 5x7 and 9x13 dots per character, variably adjustable dot spacing from 0.05 to 1.0 mm straight line, circle and angle labeling Multi-line labeling possible in one embossing file inverted and mirror writing Fonts OCR, OCR-A, Arial and Courier and others Serial numbers ascending and descending, time variables, shifts Data Matrix marking (ECC200), Embossing logos (PC software for logo creation available separately) Preview and simulation of embossing Up to 2000 embossing files can be programmed Calling up 63 programmed files BCD encoded Serial communication in ASCII protocol, text protocol and binary protocol
E10-I53

Sic Marking
Nadelmarkiersystem e10-i53 For rational and permanent marking of all kinds of products. The marking system is compact at the same time robust and suitable for industrial use. Execution according to the following specification: Marking head for installation or integration into a production system Integration possible across 4 mounting surfaces completely encapsulated against dirt, leather cover in the needle assembly area Labeling area 50 x 20 mm Needle drive electromagnetic with needle guide and 60 mm embossing needle made of carbide Embossing up to 62 HRC material hardness possible max. 5 mm height compensation, depending on the embossing force Noise development 76 dB (measured at medium embossing force and speed on sheet steel) 5 m robotic cable to the control unit Protection class IP 40 Weight 2.7 kg Control unit Integrated membrane keyboard, high-resolution color display (480x272 pixels) USB interface, special USB driver is required RS 232 and RS 422 interface, USB connection Ethernet and gateway for Profibus optional Signal exchange via potential-free contacts, start/stop unit Protection class IP 40 Weight 5.0kg software Font height adjustable from 0.5 to 20 mm Dot matrix: 5x7 and 9x13 dots per character, variably adjustable dot spacing from 0.05 to 1.0 mm straight line, circle and angle labeling Multi-line labeling possible in one embossing file inverted and mirror writing Fonts OCR, OCR-A, Arial and Courier and others Serial numbers ascending and descending, time variables, shifts Data Matrix marking (ECC200), Embossing logos (PC software for logo creation available separately) Preview and simulation of embossing Up to 2000 embossing files can be programmed Calling up 63 programmed files BCD encoded Serial communication in ASCII protocol, text protocol and binary protocol
Nadel 60 mm/90° Material: carbide Diameter: 4mm Length: 60mm Bevel: 90°
1120012

Sic Marking
Nadel 60 mm/90° Material: carbide Diameter: 4mm Length: 60mm Bevel: 90°
Nadel 60 mm/90°
1120012

Sic Marking
Nadel 60 mm/90°
MOTOR X 42X42
2230199

Sic Marking
MOTOR X 42X42
Motor 42X42
2230089

Sic Marking
Motor 42X42