"Vega" markasına ait modeller;
PSSR68.RXE1Q2HAMAV
eID: DE80870068

Radar sensor for continuous level measurement of bulk solids

scope of application
The VEGAPULS SR 68 is a sensor for the continuous measurement of bulk solids, even under difficult process conditions. It is particularly suitable for level measurement in high silos and large bunkers. Due to the simple commissioning and the reliable, maintenance-free operation, the
VEGAPULS SR 68 an economical solution.

Your benefit
- Maintenance-free operation due to non-contact measuring method
- High system availability because it is wear-free and maintenance-free
- Reliable measurement independent of steam, dust and noise

Device generation: plics®plus
Approval Directive / Scope : ATEX / Europe
Approval RX : ATEX II 1D, 1/2D, 2D Ex t IIIC T* Da, Da/Db, Db
Version / Material E : with horn antenna (ø95mm) / 316L
Process connection / Material 1Q : Swivel bracket with flange DN100 PN16 /316/316L
Seal / process temperature 2 : FKM (SHS FPM 70C3 GLT) and PTFE / -40...+ 130°C
Electronics H : two-wire 4 ... 20 mA/HART
Optional surge protection : none
Housing / protection class A: aluminum single chamber / IP66/IP68 (0.2 bar)
Cable entry/cable gland/connector connection
M : M20x1.5 / with / without
Indicating/adjustment module PLICSCOM A : built-in
Additional equipment V : Flushing connection with non-return valve
Measuring range : 30,000 m
Language of the PLICSCOM menu : EN - English
Operating instructions : DE+EN - German + English
Number of operating instructions: 1
Min. process pressure in bar : -1
Max. process pressure in bar : 1,000
VEGAPULS SR 68

Vega
PSSR68.RXE1Q2HAMAV eID: DE80870068 Radar sensor for continuous level measurement of bulk solids scope of application The VEGAPULS SR 68 is a sensor for the continuous measurement of bulk solids, even under difficult process conditions. It is particularly suitable for level measurement in high silos and large bunkers. Due to the simple commissioning and the reliable, maintenance-free operation, the VEGAPULS SR 68 an economical solution. Your benefit - Maintenance-free operation due to non-contact measuring method - High system availability because it is wear-free and maintenance-free - Reliable measurement independent of steam, dust and noise Device generation: plics®plus Approval Directive / Scope : ATEX / Europe Approval RX : ATEX II 1D, 1/2D, 2D Ex t IIIC T* Da, Da/Db, Db Version / Material E : with horn antenna (ø95mm) / 316L Process connection / Material 1Q : Swivel bracket with flange DN100 PN16 /316/316L Seal / process temperature 2 : FKM (SHS FPM 70C3 GLT) and PTFE / -40...+ 130°C Electronics H : two-wire 4 ... 20 mA/HART Optional surge protection : none Housing / protection class A: aluminum single chamber / IP66/IP68 (0.2 bar) Cable entry/cable gland/connector connection M : M20x1.5 / with / without Indicating/adjustment module PLICSCOM A : built-in Additional equipment V : Flushing connection with non-return valve Measuring range : 30,000 m Language of the PLICSCOM menu : EN - English Operating instructions : DE+EN - German + English Number of operating instructions: 1 Min. process pressure in bar : -1 Max. process pressure in bar : 1,000

PS69.AXCSAAHXKMKXX

ID: DE74006542
Radar sensor for continuous level measurement of bulk solids
scope of application
VEGAPULS 69 is a sensor for the continuous measurement of bulk solids of all kinds
process conditions. It is ideal for level measurement in very high silos, large bunkers and
segmented containers. Due to the very good signal bundling, easy commissioning and
reliable measurement guaranteed. The VEGAPULS 69 can be equipped with an encapsulated plastic antenna
or a lens antenna integrated in the metal flange. This allows for the optimal
Adaptation to the various areas of application.
Your benefit
- Maintenance-free operation due to non-contact measuring method
- High system availability because it is wear-free and maintenance-free
- Reliable measurement independent of steam, dust and noise
The VEGAPULS 69 is still available until September 1st, 2025, depending on the availability of the components.
VEGAPULS 6X is available as the successor device.
Area A : Europe
Approval X : for Ex-free area
Design / Material C : Metal-framed lens antenna with flushing connection /
PEEK
Process connection / Material SA : Swivel bracket with flange DN100 PN16 form
B,DIN/316/316L
Gasket / Process Temperature A : FKM (SHS FPM 70C3 GLT) and PEEK / -40...+
130°C
Electronics H : two-wire 4 ... 20 mA/HART
Additional electronics X : without
Optional surge protection : none
Housing / protection class K : plastic single chamber / IP66/IP67
Cable entry / connection M: M20x1.5 / cable gland PA black
(ø5-9mm), standard
Indicating/adjustment module PLICSCOM K : built-in; with Bluetooth, magnetic stick operation
Additional equipment X : none
Certificates X : No
Max. measuring range : 120,000 m
Operating instructions : DE - German
Number of operating instructions: 1
Min. process pressure in bar : -1,000
Max. process pressure in bar : 3.0
Customs tariff number (HS code) : 90318080
VEGAPULS 69

Vega
PS69.AXCSAAHXKMKXX ID: DE74006542 Radar sensor for continuous level measurement of bulk solids scope of application VEGAPULS 69 is a sensor for the continuous measurement of bulk solids of all kinds process conditions. It is ideal for level measurement in very high silos, large bunkers and segmented containers. Due to the very good signal bundling, easy commissioning and reliable measurement guaranteed. The VEGAPULS 69 can be equipped with an encapsulated plastic antenna or a lens antenna integrated in the metal flange. This allows for the optimal Adaptation to the various areas of application. Your benefit - Maintenance-free operation due to non-contact measuring method - High system availability because it is wear-free and maintenance-free - Reliable measurement independent of steam, dust and noise The VEGAPULS 69 is still available until September 1st, 2025, depending on the availability of the components. VEGAPULS 6X is available as the successor device. Area A : Europe Approval X : for Ex-free area Design / Material C : Metal-framed lens antenna with flushing connection / PEEK Process connection / Material SA : Swivel bracket with flange DN100 PN16 form B,DIN/316/316L Gasket / Process Temperature A : FKM (SHS FPM 70C3 GLT) and PEEK / -40...+ 130°C Electronics H : two-wire 4 ... 20 mA/HART Additional electronics X : without Optional surge protection : none Housing / protection class K : plastic single chamber / IP66/IP67 Cable entry / connection M: M20x1.5 / cable gland PA black (ø5-9mm), standard Indicating/adjustment module PLICSCOM K : built-in; with Bluetooth, magnetic stick operation Additional equipment X : none Certificates X : No Max. measuring range : 120,000 m Operating instructions : DE - German Number of operating instructions: 1 Min. process pressure in bar : -1,000 Max. process pressure in bar : 3.0 Customs tariff number (HS code) : 90318080