BNA-BMDGAEDCARZZZZZZZHZZZGAZZ12KPA245Z1ZZZZ
BLR-CMZZ54ZA221500ZZ
BNA-EN25/16/B1-MG-M1.500-V60x2-MRF-ZTS245/PN16/A110
Bypass level indicator type BNA-SA1
pressure: 10 bar; Temp.: -10°C...350°C; Density, medium: 700 kg/m³
Interpretation: PED 2014/68/EU (AD2000)
Classification according to DGRL 2014/68/EU: Category I, Module A,
fluid group 1
Test pressure: 21 bar
Chamber dimensions: 60.3 x 2 mm stainless steel 1.4571 (316Ti)
Process connection: flange DIN EN 1092-1 DN 25 PN 16 form B1
Center distance: 1500mm
Measuring range: 1500mm
Chamber closure at the top: tube sheet
Chamber closure below: Flange D130
Drain: screw plug G 1/2"
Float: ZTS245/PN16/A110
Advertisement: BMD-FA, aluminum profile with stainless steel flaps
Damping element: damping spring below with cover
Gasket(s): Sigraflex Universal Pro
Screws: stainless steel A4-70 (M)
Projection above (T): 100 mm
Projection below (U): 200 mm
Distance lower process connection to end drain: 260 mm (max.)
Lateral distance (X): 90 mm
Nameplate: Laser-marked aluminium
Weight: 14.6 kg
MG-AUVK15/HT/MT/TS-L1.650/M1.500/14
Sensor bypass mounting reed type BLR-SB
Backing: 3mm Microtherm
Material: stainless steel 1.4571 (316Ti)
Housing: aluminum IP66/68 cable gland M20x1.5 mm
LCD display: None
Head transmitter: TS - 2-wire, standard, analogue
Output signal: 4-20mA
Body Arrangement: Angled Down
100% Mark (L1): 0mm
0% mark: 0 mm
Measuring range: 1500mm
Pipe length: 1650mm
Contact pitch: 15 mm
Case elevation: 100 mm
When using Microtherm, the BLR must not be insulated
