temperature calibration

Typ: Tpl-06-500-T

Pitot tube, stainless steel Type: TPL-06-500-T For measuring: Pressure, air velocity, volume flow, temperature heat resistant up to + 600 ° C (optional up to 1000 ° C) with integr. Thermocouple for simultaneous Temperature measurement (compensation) type K Incl. 1.5m connection cable with plug Diameter: 6 mm / NL: 500 mm Delivery incl. 1.5 m cable for thermocouple

Typ: Mpr-10000

Diff. Pressure module incl. Temperature input The module has the latest Autom. recognition system With this module, the differential pressure, temperature Air velocity and the volume flow be determined. Type: MPR-10000 Measuring range: - 10,000 to .. + 10,000 Pa (Conversion to other units possible) Resolution: 1 Pa Accuracy: +/- 0.2% v. reading Temperature measuring range: -200 ... to + 1300 ° C (for thermocouple type-K, J, or T) Delivery incl. 2 x 1 m silicone hose Incl. Adjustment certificate (test certificate) Country of origin: France Customs fee number. 9026 9000 Art.-No .: 56-24784

Ami 310 Pro With Large Color Display

Multifunction hand-held device incl. Equipment case that meets your measurement requirements its unique modular system adapts. Likewise, the operation of the device is so easy that for the vast majority of applications the manual is redundant. Type: AMI 310 PRO with large color display - Recording the measurements on SD card - (optional data processing software) - up to 8 modules for measuring function expansion - simply replace the measuring module and you're off. - Measure up to 6 temperatures simultaneously - wireless communication "wireless" possible - Smart-plus system autom. Detection of the probes - Rubber protection housing incl. Strong magnets features: Air velocity, volume flow, pressure, Air pressure, climate, humidity, temperature, Measured value memory, averaging, air quality, Co, Co2,, U-value, speed, Comfort Measurement, Wet Bulb Globe (WBGT) IR printer (optional) Complete set, consisting of: - AMI 310 hand-held measuring device incl. Holding magne

Calculation Function Sqr / 3

Calculation function SQR / 3 for differential pressure transmitters of the series 210/310 This feature allows the measured Pressure signal as volume flow and air velocity displayed and as an analogue output signal can be processed further. Tariff No .: 9025 9000 Country of origin: France Art.-No .: 56-24105

Type: C 310-Bo With Display

Multifunction transducer which adapts to their measuring requirements. Optional are the following measurements with the corresponding modules / probes such as. Differential pressure, air velocity, volume flow, rel. Humidity, dew point, temperature, CO2, CO and air pressure (barometric pressure) possible. Likewise, over the pressure signal with the SQR / 3 function (optional) the air velocity, the flow rate is shown on the display and as analog signal to be processed further. Technical specifications: Power supply: 24 V AC / DC Analog outputs: 2 x 0 / 4-20 mA or 2 x 0 / 5-10V (Optional: 4 x 0 / 4-20 mA or 4 x 0 / 5-10V) Relay outputs: 4 x change-over contacts 5A / 230V (optional) REPL. Print modules incl. Temperature input (+/- 100 Pa, 500 Pa, 1000 Pa, 10,000 Pa optional) Optional: Interface for RS485 Modbus protocol and Ethernet networks. Please note when ordering, the Ethernet interface can not be retrofitted. Housing: IP 65 ABS housing with stainless steel fron

Typ: Spi2-500

Replaceable differential pressure module incl. temperature input for class 310 For measuring differential pressure and temperature. Thermocouple input type-K. (Temperature compensation possible) The printing module has an autom. self-calibration of the zero point This ensures excellent long-term stability. Measuring ranges: Pressure: + / - 500 Pa (other measuring ranges available) Resolution: 1 Pa Accuracy: +/- 0.2% of reading Temperature: -200 ... 1300 ° C (depending on the probe) Tariff No .: 9026 2020 Art.-No .: 56-24415

56-17073

56-17077

Multifunctional transmitter

that adapts to your measurement requirements. Type: C 310-BO with display Optionally, several measurements can be carried out at the same time correspond to probes and modules such as Pressure, Differential pressure, air speed, volume flow, rel. Humidity, dew point, temperature, CO2, CO and (barom. air pressure) possible. You can also use the pressure signal the SQR/3 function (optional) the air speed, the volume flow is shown on the display and as analog signal can be further processed. Technical data: Power supply: 24V AC/DC Analogue outputs: 2 x 0/4-20 mA or 2 x 0/5-10V (Optional: 4 x 0/4-20 mA or 4 x 0/5-10V) Relay outputs: 4 x changeover contacts 5A / 230V (optional) exchangeb. Pressure modules including temperature input (+/- 100Pa, 500Pa, 1000Pa, 10,000Pa optional) Optional: Interface for RS485 Modbus-RTU protocol and Ethernet networks. Please note when ordering, the Ethernet interface cannot be retrofitted. Housing: IP 65 ABS housing with stainless steel front including 4 x 2 colored LEDs and acoustic alarm Operating temperature: -10..to + 50°C All transmitter settings can be carried out using the keypad on the device or (optionally) via the parameterization software LCC-S quickly and easily from your laptop. Included in delivery: bracket / adjustment certificate DANGER: We would like to point out that probes, modules etc. are not included.

Interchangeable temperature/humidity probe

for class 310 transmitter Type: SHDI-150 Stainless steel probe with stainless steel filter for relative humidity and temperature. Measuring range: 5 ... 95%RH and -40 ... +180°C Cable: white silicone cable, approx. 2 m long (Cable extensions available 5 and 10 m) Measuring probe: Ø 13 mm Probe length: 150mm Various filter caps available (optional) Sensor attachment / cable extension (optional) Calibration certificate (optional)