F 150 E G 5“- G 5“ GA FLG

F150-021-209704
according to drawing F150-021-209704-IC,
Two-way version for water supply and return,
rotor-supported, ball bearing, nominal width: 6", with special flange rotor, AD = 500 mm, id: 480 mm, LK = 440 mm, 6 x Ø 18 mm,
with ball bearing (2 pieces), with Deublin standard grease nipple,
Connection on the housing: G 5" DN125 (6 o'clock position),
Connection on the end cap: G 5" DN125 (6 o'clock position),
Siphon pipe specification: Type: E,
Rotor centering seat length: 15 mm
Torque support in 6 o'clock position,
Material of housing and end cap: cast iron or steel,
chemically nickel-plated, with blue external paint (RAL 5009),
Ball bearing greased with KLÜBER PETHAMO GHY 441,
Rotor flange seal: O-ring/flat seal (not included in delivery).
Two-way siphon tube specification (F150-021-209704):
Type E: Rotating siphon with axial expansion
The roller siphon tube to be provided by the customer is sealed with two O-rings in the siphon tube of the
rotary union. It can undergo thermally induced length changes.
In type E, the fixed point of the siphon tube is inside the roller.
Maximum operating data (F150-021-209704):
Medium: Water
Pressure*: pmax = 6 bar
Temperature: tmax = 70 °C
Speed*: nmax = 2 min-1
* Max. pressure and max. speed at the same time is not permitted