"Ziehl Abegg" markasına ait modeller;
UL Recognized Component E111399 ZA-155 1~ 230V ±15% 50-3Hz P1 0.59kW 2.6A DI=0% 2680/MIN 12uF/400V 70°C 1~ 230V ±15% 60+3Hz P1 0.70kW 3.3A DI=0% 2550/MIN 12uF/400V 70°C IP10 THCL 155 MK092-2EK.10.U ErP compliant no Capacitor not included Connection cable on the side, 55cm. Wiring Diagram: 1360-117XA Sandwich Label Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Conveyor temperature min - 25 degrees Celsius Humidity/tropical protection. Balancing quality G 6.3 Motor 1-layer paintwork RAL 7032 (pebble grey) in resistance class 1 (L-TI-0596) Aluminum impeller, unpainted Ball bearings with long-term greasing. With Nilo ring. www.ziehl-abegg.com/erp-ab.pdf (A) www.ziehl-abegg.com/erp-ab.pdf (G)
RH28M-2EK.3F.1R

Ziehl Abegg
UL Recognized Component E111399 ZA-155 1~ 230V ±15% 50-3Hz P1 0.59kW 2.6A DI=0% 2680/MIN 12uF/400V 70°C 1~ 230V ±15% 60+3Hz P1 0.70kW 3.3A DI=0% 2550/MIN 12uF/400V 70°C IP10 THCL 155 MK092-2EK.10.U ErP compliant no Capacitor not included Connection cable on the side, 55cm. Wiring Diagram: 1360-117XA Sandwich Label Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Conveyor temperature min - 25 degrees Celsius Humidity/tropical protection. Balancing quality G 6.3 Motor 1-layer paintwork RAL 7032 (pebble grey) in resistance class 1 (L-TI-0596) Aluminum impeller, unpainted Ball bearings with long-term greasing. With Nilo ring. www.ziehl-abegg.com/erp-ab.pdf (A) www.ziehl-abegg.com/erp-ab.pdf (G)
TR660IP, temperature relay for Pt 100/1000, PTC 6 sensors, 7 limits, TCP/IP, RS 485 (Modbus RTU) 6 sensors, 7 limit values RS 485 Modbus RTU LCD display and joystick for easy operation IP interface Us AC/DC 24-240 V cURus UL-E337414
T224371

Ziehl Abegg
TR660IP, temperature relay for Pt 100/1000, PTC 6 sensors, 7 limits, TCP/IP, RS 485 (Modbus RTU) 6 sensors, 7 limit values RS 485 Modbus RTU LCD display and joystick for easy operation IP interface Us AC/DC 24-240 V cURus UL-E337414
TR600, temperature relay for Pt 100 6 sensors, 6 alarms, RS 485 (Modbus RTU) 6 sensors, -199...800 °C 6 alarms/relay Digital display Interface RS 485, Modbus RTU Us AC/DC 24-240 V USB interface for programming cURus UL-E337414 replaces T224153 + T224154
T224361

Ziehl Abegg
TR600, temperature relay for Pt 100 6 sensors, 6 alarms, RS 485 (Modbus RTU) 6 sensors, -199...800 °C 6 alarms/relay Digital display Interface RS 485, Modbus RTU Us AC/DC 24-240 V USB interface for programming cURus UL-E337414 replaces T224153 + T224154
Switching device for 3~motors Artikelnummer: 301024 Switching device for 3~motors Type: S-DT2ST ZIEHL-ABEGG standard design Mains voltage: 3N~ 400 V 50/60 Hz Rated current: 10 A Degree of protection: IP54 Motor protection through connection option for thermostat switch
S-DT2ST

Ziehl Abegg
Switching device for 3~motors Artikelnummer: 301024 Switching device for 3~motors Type: S-DT2ST ZIEHL-ABEGG standard design Mains voltage: 3N~ 400 V 50/60 Hz Rated current: 10 A Degree of protection: IP54 Motor protection through connection option for thermostat switch
Single-flow motor fan wheel with forward-curved blades. Type: RE28P-4DK.6F.1R 3~ 230/400V ±10% D/Y 50Hz P1 1.50kW 4.4/2.6A 1310/MIN COZY 0.83 PsF min.30PA 40°C 3~ 230/400V ±10% D/Y 60Hz P1 1.65kW 4.7/2.7A DI=0% 1530/MIN COZY 0.88 PsF min.370PA 40°C 3~ 265/460V ±10% D/Y 60Hz P1 1.85kW 4.7/2.7A 1600/MIN COZY 0.86 PsF min.370PA 40°C IP54 THCL 155 ErP compliant 2015 N=47.1 statA=39.2% Terminal box K08 permanently installed on the motor. Circuit diagram: 1360-106XA Rating plate: 1x fixed, 1x loose. Installation position H/Vu/Vo. Motor protection: thermostat switch Medium temperature min - 20 degrees Celsius Moisture/tropical protection. Balancing quality G 6.3 Engine 1-layer paint RAL 7032 (pebble gray) in resistance class 1 (L-TI-0596) Impeller made of sheet steel, galvanized, unpainted Ball bearings with long-term greasing.
102304

Ziehl Abegg
Single-flow motor fan wheel with forward-curved blades. Type: RE28P-4DK.6F.1R 3~ 230/400V ±10% D/Y 50Hz P1 1.50kW 4.4/2.6A 1310/MIN COZY 0.83 PsF min.30PA 40°C 3~ 230/400V ±10% D/Y 60Hz P1 1.65kW 4.7/2.7A DI=0% 1530/MIN COZY 0.88 PsF min.370PA 40°C 3~ 265/460V ±10% D/Y 60Hz P1 1.85kW 4.7/2.7A 1600/MIN COZY 0.86 PsF min.370PA 40°C IP54 THCL 155 ErP compliant 2015 N=47.1 statA=39.2% Terminal box K08 permanently installed on the motor. Circuit diagram: 1360-106XA Rating plate: 1x fixed, 1x loose. Installation position H/Vu/Vo. Motor protection: thermostat switch Medium temperature min - 20 degrees Celsius Moisture/tropical protection. Balancing quality G 6.3 Engine 1-layer paint RAL 7032 (pebble gray) in resistance class 1 (L-TI-0596) Impeller made of sheet steel, galvanized, unpainted Ball bearings with long-term greasing.
Single-flow motor fan wheel with backward-curved blades Type: RH45M-4DK.4Y.1R ATEX fan motor unit Ex II 2G Ex h IIB T3 Gb 3~ 230/400V D/Y 50Hz P1 0.77kW 2.4/1.4A DI=6% 1350/MIN COZY 0.79 IP44 THCL 155 Ex II 2G Ex eb IIC T3 Gb 3~ 290/500V D/Y 50Hz P1 0.92kW -20°C<Ta<+40°C 2.6/1.49A 1370RPM COZY 0.71 max. current 2.75/1.58A at partial voltage D/Y MK106-4DK.14.Y IA/IN 4.1tA 50s PTB 08 ATEX 3061/03 N=58.0 statA=46.3% Connection cable axial, 105cm. Wiring Diagram: 1360-130XA rating plate: Fan - rating plate: 1x fixed. Fan rating plate: 1x in BAL. Direction of rotation arrow: 1x fixed. Installation position H/Vu/Vo. Motor protection: PTC thermistor Conveyor temperature min - 20 degrees Celsius Humidity/tropical protection. Balancing quality G 6.3 Motor 2-layer paintwork RAL 9005 (jet black) in resistance class 3 (L-TI-0596) Aluminum impeller, galvanized cover plate, powder-coated RAL 9005 (jet black) in resistance class 1 (L-TI-0585). Ball bearings with long-term greasing. Note: ATEX fan with the above ATEX classification: In particular, check whether the fan those in the explosion protection document/risk assessment specified end use requirements. On this point, we contradict the possibly in mentioned in your inquiry or order deviating information on Ex category, Ex temperature class, etc.
131018

Ziehl Abegg
Single-flow motor fan wheel with backward-curved blades Type: RH45M-4DK.4Y.1R ATEX fan motor unit Ex II 2G Ex h IIB T3 Gb 3~ 230/400V D/Y 50Hz P1 0.77kW 2.4/1.4A DI=6% 1350/MIN COZY 0.79 IP44 THCL 155 Ex II 2G Ex eb IIC T3 Gb 3~ 290/500V D/Y 50Hz P1 0.92kW -20°C<Ta<+40°C 2.6/1.49A 1370RPM COZY 0.71 max. current 2.75/1.58A at partial voltage D/Y MK106-4DK.14.Y IA/IN 4.1tA 50s PTB 08 ATEX 3061/03 N=58.0 statA=46.3% Connection cable axial, 105cm. Wiring Diagram: 1360-130XA rating plate: Fan - rating plate: 1x fixed. Fan rating plate: 1x in BAL. Direction of rotation arrow: 1x fixed. Installation position H/Vu/Vo. Motor protection: PTC thermistor Conveyor temperature min - 20 degrees Celsius Humidity/tropical protection. Balancing quality G 6.3 Motor 2-layer paintwork RAL 9005 (jet black) in resistance class 3 (L-TI-0596) Aluminum impeller, galvanized cover plate, powder-coated RAL 9005 (jet black) in resistance class 1 (L-TI-0585). Ball bearings with long-term greasing. Note: ATEX fan with the above ATEX classification: In particular, check whether the fan those in the explosion protection document/risk assessment specified end use requirements. On this point, we contradict the possibly in mentioned in your inquiry or order deviating information on Ex category, Ex temperature class, etc.
Single-flow motor fan wheel with backward-curved blades Cpro UL Recognized Component E111399 ZA-155 3~ 400V ±10% D 50Hz P1 0.66kW 1.25A 2800RPM COZY 0.77 70°C 3~ 400V ±10% D 60Hz P1 1.00kW 1.65A 3170/MIN COZY 0.90 60°C 3~ 460V ±10% D 60Hz P1 1.10kW 1.55A 3270/MIN COZY 0.86 60°C 3~ 500V ±20% Y 50Hz P1 0.58kW 0.72A 2640/MIN COZY 0.89 70°C IP54 THCL 155 MK092-2DK.14.U ErP compliant 2015 N=63.1 statA=50.6% Connection cable on the side, 65cm. Wiring Diagram: 1360-106XA Sandwich Label Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Conveyor temperature min - 20 degrees Celsius Special impregnation HV. Balancing quality G 2.5 Motor 1-layer paintwork RAL 7032 (pebble grey) in resistance class 1 (L-TI-0596) Impeller made of ZAmid, unpainted similar to RAL 5002 (ultramarine blue) Fan wheel construction on the D flange. Ball bearings with long-term greasing.
RH28C-2DD.3I.CR 163827

Ziehl Abegg
Single-flow motor fan wheel with backward-curved blades Cpro UL Recognized Component E111399 ZA-155 3~ 400V ±10% D 50Hz P1 0.66kW 1.25A 2800RPM COZY 0.77 70°C 3~ 400V ±10% D 60Hz P1 1.00kW 1.65A 3170/MIN COZY 0.90 60°C 3~ 460V ±10% D 60Hz P1 1.10kW 1.55A 3270/MIN COZY 0.86 60°C 3~ 500V ±20% Y 50Hz P1 0.58kW 0.72A 2640/MIN COZY 0.89 70°C IP54 THCL 155 MK092-2DK.14.U ErP compliant 2015 N=63.1 statA=50.6% Connection cable on the side, 65cm. Wiring Diagram: 1360-106XA Sandwich Label Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Conveyor temperature min - 20 degrees Celsius Special impregnation HV. Balancing quality G 2.5 Motor 1-layer paintwork RAL 7032 (pebble grey) in resistance class 1 (L-TI-0596) Impeller made of ZAmid, unpainted similar to RAL 5002 (ultramarine blue) Fan wheel construction on the D flange. Ball bearings with long-term greasing.
Single-flow motor fan wheel with backward-curved blades Art. Nr. 203558 3.6/2.1A DI=10% 1340/MIN COZY 0.78 70°C IP54 THCL 155 ErP compliant 2015 N=62.0 statA=52.2% Terminal box K08 permanently mounted on the motor. Wiring Diagram: 1360-106XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Humidity/tropical protection. Balancing quality G 6.3 Motor 1-layer paintwork RAL 7032 (pebble grey) in resistance class 1 (L-TI-0596) Aluminum impeller, unpainted Ball bearings with long-term greasing.
RH50M-4DK.6F.1R

Ziehl Abegg
Single-flow motor fan wheel with backward-curved blades Art. Nr. 203558 3.6/2.1A DI=10% 1340/MIN COZY 0.78 70°C IP54 THCL 155 ErP compliant 2015 N=62.0 statA=52.2% Terminal box K08 permanently mounted on the motor. Wiring Diagram: 1360-106XA Rating plate: 1x fixed. Installation position H/Vu/Vo. Motor protection: thermostat switch Mode of operation: continuous operation with occasional Start-up (S1) according to DIN EN 60034-1:2011-02 Occasional start-up between -40 °C and -25 °C is permissible. Continuous operation below -25 °C only with special Bearings for refrigeration applications possible on request. Humidity/tropical protection. Balancing quality G 6.3 Motor 1-layer paintwork RAL 7032 (pebble grey) in resistance class 1 (L-TI-0596) Aluminum impeller, unpainted Ball bearings with long-term greasing.
Single-flow centrifugal fan with spiral housing. Type: RG28P-4DK.4I.1L 3~ 400V ±10% Y 50Hz P1 1.25kW 2.2A 1290/MIN COZY 0.82 PsF min.150PA 55°C 3~ 400V ±10% Y 60Hz P1 1.35kW 2.3A 1490/MIN COZY 0.85 PsF min.440PA 55°C 3~ 460V ±10% Y 60Hz P1 1.50kW 2.3A 1520/MIN COZY 0.82 PsF min.450PA 55°C IP10THCL 155 ErP conformal 2015 N=47.7 statA=39.4% Connection cable on the side, 105cm. Wiring Diagram: 1360-159XB Sandwich Label Rating plate: 1x fixed. Direction of rotation arrow: 1x fixed. Installation position H. Motor protection: thermostat switch Medium temperature min - 20 degrees Celsius Special impregnation HV. Balancing quality G 2.5 Motor 1-layer paint RAL 7032 (pebble gray) in resistance class 1 (L-TI-0596) Impeller made of sheet steel, galvanized, unpainted Housing unpainted. Fan wheel structure on stator side on K-flange. Inlet nozzle without measuring device for volume flow measurement Inlet nozzle made of galvanized steel, unpainted Protective grille on the suction side is firmly installed. no contact protection according to DIN EN ISO 13857 Without mounting brackets. Blow-out flange firmly attached to the spiral casing Ball bearings with long-term greasing.
160760

Ziehl Abegg
Single-flow centrifugal fan with spiral housing. Type: RG28P-4DK.4I.1L 3~ 400V ±10% Y 50Hz P1 1.25kW 2.2A 1290/MIN COZY 0.82 PsF min.150PA 55°C 3~ 400V ±10% Y 60Hz P1 1.35kW 2.3A 1490/MIN COZY 0.85 PsF min.440PA 55°C 3~ 460V ±10% Y 60Hz P1 1.50kW 2.3A 1520/MIN COZY 0.82 PsF min.450PA 55°C IP10THCL 155 ErP conformal 2015 N=47.7 statA=39.4% Connection cable on the side, 105cm. Wiring Diagram: 1360-159XB Sandwich Label Rating plate: 1x fixed. Direction of rotation arrow: 1x fixed. Installation position H. Motor protection: thermostat switch Medium temperature min - 20 degrees Celsius Special impregnation HV. Balancing quality G 2.5 Motor 1-layer paint RAL 7032 (pebble gray) in resistance class 1 (L-TI-0596) Impeller made of sheet steel, galvanized, unpainted Housing unpainted. Fan wheel structure on stator side on K-flange. Inlet nozzle without measuring device for volume flow measurement Inlet nozzle made of galvanized steel, unpainted Protective grille on the suction side is firmly installed. no contact protection according to DIN EN ISO 13857 Without mounting brackets. Blow-out flange firmly attached to the spiral casing Ball bearings with long-term greasing.
Single-flow centrifugal fan with spiral casing. Type: RG28P-4EK.4I.1R UL Recognized Component E111399 ZA-155 1~ 230V ±15% 50Hz P1 0.69kW 3.0A 1360/MIN 14uF/400V PsF min.250PA 1~ 230V ±15% 60Hz P1 1.05kW 4.5A 1440/MIN 14uF/400V PsF min.450PA IP10 THCL 155 MK106-4EK.14.U ErP compliant 2015 N=44.0 statA=36.0% Capacitor attached to case. Connection cable on the side, 25cm. Wiring Diagram: 1360-151XA Rating plate: 1x fixed. Direction of rotation arrow: 1x fixed. Installation position H Motor protection: thermostat switch Conveyor temperature min - 20 degrees Celsius Humidity/tropical protection. Balancing quality G 2.5 Motor 1-layer paintwork RAL 7032 (pebble grey) in resistance class 1 (L-TI-0596) Impeller made of sheet steel, galvanized, unpainted Housing unpainted. Fan wheel assembly on the stator side on the K flange. Inlet nozzle without measuring device for volume flow measurement Inlet nozzle made of galvanized steel, unpainted Without mounting bracket. Discharge flange fixed to the volute casing Ball bearings with long-term greasing.
112305

Ziehl Abegg
Single-flow centrifugal fan with spiral casing. Type: RG28P-4EK.4I.1R UL Recognized Component E111399 ZA-155 1~ 230V ±15% 50Hz P1 0.69kW 3.0A 1360/MIN 14uF/400V PsF min.250PA 1~ 230V ±15% 60Hz P1 1.05kW 4.5A 1440/MIN 14uF/400V PsF min.450PA IP10 THCL 155 MK106-4EK.14.U ErP compliant 2015 N=44.0 statA=36.0% Capacitor attached to case. Connection cable on the side, 25cm. Wiring Diagram: 1360-151XA Rating plate: 1x fixed. Direction of rotation arrow: 1x fixed. Installation position H Motor protection: thermostat switch Conveyor temperature min - 20 degrees Celsius Humidity/tropical protection. Balancing quality G 2.5 Motor 1-layer paintwork RAL 7032 (pebble grey) in resistance class 1 (L-TI-0596) Impeller made of sheet steel, galvanized, unpainted Housing unpainted. Fan wheel assembly on the stator side on the K flange. Inlet nozzle without measuring device for volume flow measurement Inlet nozzle made of galvanized steel, unpainted Without mounting bracket. Discharge flange fixed to the volute casing Ball bearings with long-term greasing.
SIZE:59*59-400V/D- 0.49KW-1.7A-1300RPM- COS:0.64, 7 fins, Diameter: 50 cm
153055 FN050- VDA.4I.V7P1

Ziehl Abegg
SIZE:59*59-400V/D- 0.49KW-1.7A-1300RPM- COS:0.64, 7 fins, Diameter: 50 cm
RELAY TEMPERATURE TR600-T224261 24-240VAC\DC
TR600-T224361

Ziehl Abegg
RELAY TEMPERATURE TR600-T224261 24-240VAC\DC
PNOZ safety relays PNOZ s2 C 24VDC 3 n/o 1 n/c PNOZsigma safety switching device (standalone), inputs: 1-channel wiring, without cross-circuit detection, manual/automatic start, Outputs: 3 NO, 1 NC, 1 HL, UB = 24 V DC, width: 17.5 mm, pluggable Spring-loaded terminals, emergency stop monitoring, protective doors.
751102

Ziehl Abegg
PNOZ safety relays PNOZ s2 C 24VDC 3 n/o 1 n/c PNOZsigma safety switching device (standalone), inputs: 1-channel wiring, without cross-circuit detection, manual/automatic start, Outputs: 3 NO, 1 NC, 1 HL, UB = 24 V DC, width: 17.5 mm, pluggable Spring-loaded terminals, emergency stop monitoring, protective doors.

PNOZ s7.2 C 24VDC 4 n/o 1 n/c expand PNOZsigma contact expansion, outputs: 4 NO, 1 NC, UB = 24 V DC, width: 17.5 mm, pluggable spring terminals, contact block for Contact expansion in connection with safety-related Control parts, additional contact blocks can be attached on the right.
751177

Ziehl Abegg
PNOZ s7.2 C 24VDC 4 n/o 1 n/c expand PNOZsigma contact expansion, outputs: 4 NO, 1 NC, UB = 24 V DC, width: 17.5 mm, pluggable spring terminals, contact block for Contact expansion in connection with safety-related Control parts, additional contact blocks can be attached on the right.
PNOZ s7.1 C 24VDC 3 n/o cascade PNOZ safety relays PNOZsigma contact expansion, outputs: 3 NO, UB = 24 V DC, width: 17.5 mm, pluggable spring terminal block, contact block for Contact expansion in connection with safety-related Control parts, additional voltage connection for the supply of further contact blocks
751167

Ziehl Abegg
PNOZ s7.1 C 24VDC 3 n/o cascade PNOZ safety relays PNOZsigma contact expansion, outputs: 3 NO, UB = 24 V DC, width: 17.5 mm, pluggable spring terminal block, contact block for Contact expansion in connection with safety-related Control parts, additional voltage connection for the supply of further contact blocks
Ø910- WITH ADAPTER
ZC091-SDQ-7Q-V5

Ziehl Abegg
Ø910- WITH ADAPTER
N2 AIR DRYER UNIT CONDENSER COOLING FAN DETAILS: AXIAL FAN WITH SICKLE BLADES MAKER: ZIEHL-ABEGG MODEL: FN 045-4DK.4I.V7P1 RATED VALUES: 3 PHASE 265/460 V, 60 Hz, 0,82 KW, 1520 rpm DETAILED INFORMATION PAGE WAS ATTACHED IN ATTACHMENT SECTION
FN 045-4DK.4I.V7P1

Ziehl Abegg
N2 AIR DRYER UNIT CONDENSER COOLING FAN DETAILS: AXIAL FAN WITH SICKLE BLADES MAKER: ZIEHL-ABEGG MODEL: FN 045-4DK.4I.V7P1 RATED VALUES: 3 PHASE 265/460 V, 60 Hz, 0,82 KW, 1520 rpm DETAILED INFORMATION PAGE WAS ATTACHED IN ATTACHMENT SECTION
Motor TX140L06 400V/56Hz ZIEHL ABEGG 5001023509
XGZA9999W

Ziehl Abegg
Motor TX140L06 400V/56Hz ZIEHL ABEGG 5001023509
MOTOR
120926h

Ziehl Abegg
MOTOR
MOTOR
134795

Ziehl Abegg
MOTOR