"Warex Valve" markasına ait modeller;
Pos. 10 Pneumatic rotary actuator AT 60 DR double-acting required control pressure 6.0 bar
1005363

Warex Valve
Pos. 10 Pneumatic rotary actuator AT 60 DR double-acting required control pressure 6.0 bar

Overall length 78 mm for clamping between flanges according to EN 1092, PN 6 Housing made of silumin Flap disc made of stainless steel 1.4408 Shafts made of stainless steel 1.4057 or higher quality Shaft sealing using O-rings Shaft bearing in brass bushing Sealing sleeve made of Buna CB black replaceable in the housing further attachments: Pneumatic rotary drive AT 300 DR double-acting required control pressure 6.0 ba Basis: Preliminary order 136901 / 2009 for medium: bulk material Properties: free-flowing, chemically neutral, not prone to caking Working pressure: approx. 200 mbar Max. permissible operating pressure: < 0.5 bar (Ps) MAWP (Note: MAWP = discharge pressure) Operating temperature: 0 °C ... + 80 °C (Ts) MAWT Ambient temperature: -10 °C ... + 45 °C (Ta) Ex protection: no requirement Evaluation of the butterfly valves in accordance with PED 2014/68/EU, Diagram 7, certified module A2. The valves are not subject to conformity assessment. Test pressure: design pressure x 1.1 bar for leaks
DKZ110 DN 300

Warex Valve
Overall length 78 mm for clamping between flanges according to EN 1092, PN 6 Housing made of silumin Flap disc made of stainless steel 1.4408 Shafts made of stainless steel 1.4057 or higher quality Shaft sealing using O-rings Shaft bearing in brass bushing Sealing sleeve made of Buna CB black replaceable in the housing further attachments: Pneumatic rotary drive AT 300 DR double-acting required control pressure 6.0 ba Basis: Preliminary order 136901 / 2009 for medium: bulk material Properties: free-flowing, chemically neutral, not prone to caking Working pressure: approx. 200 mbar Max. permissible operating pressure: < 0.5 bar (Ps) MAWP (Note: MAWP = discharge pressure) Operating temperature: 0 °C ... + 80 °C (Ts) MAWT Ambient temperature: -10 °C ... + 45 °C (Ta) Ex protection: no requirement Evaluation of the butterfly valves in accordance with PED 2014/68/EU, Diagram 7, certified module A2. The valves are not subject to conformity assessment. Test pressure: design pressure x 1.1 bar for leaks
for medium: bulk goods Properties: pourable, chemically neutral, not prone to caking Working pressure: pressureless max. allowed Working pressure : < 0.5 bar (Ps) MAWP (Note: MAWP = Ausl.-Pressure) Operating temp.: 0 °C ... + 60 °C (Ts) MAWT Ambient temp.: 0 °C ... + 50 °C (Ta) Explosion protection: II 1/3 D Ex h IIIC T85°C Da/Dc X Evaluation of the butterfly valves according to DGRL 2014/68/EU, Diagram 7, certified module A2. The fittings are not subject to the conformity assessment. Test pressure: design pressure x 1.1 bar for leak tightnessREQUIRED - Butterfly valve, type DKZE 110 <APS> DN 250 Overall length 68 mm for clamping between flanges according to EN 1092, PN 10 (see BA) with eccentric flap bearing Housing made of stainless steel 1.4408 with connection for grounding lead-out shaft with connection for grounding Flap disc made of stainless steel 1.4408 Shafts made of stainless steel 1.4057 or higher Shaft sealing with O-rings Shaft bearing in brass bush Supplied with a flat gasket made of Klingersil Support ring made of stainless steel in the housing, replaceable with replaceable profile sealing ring made of FPM black deriv. - can be clamped pneumatically against the valve disc <APS> - chamfered Clamping pressure = approx. 2-3 bar above system pressure further attachments: Pneumatic rotary drive AT 220 DR double-acting required control pressure 6.0 bar el./peum. Control for APS flaps ** 1 signal control ** Execution according to tax plan 0003475 with quick exhaust valve, without pressure regulator, with throttle silencers Solenoid valve 5/2 way function Norgren 2623077.3046 24V DC, IP65 Namur version, with manual override Cat. II 3 G Ex nA IIC T5 Gc Cat. II 3 D Ex tc IIIC T=95°C Dc Limit switch box with double sensor P+F NBB2-V3-E2-3G-3D 3-wire, pnp, normally open, 10-30 V DC, IP 66 / IP 67 installed in the aluminum housing and wired to terminal strip for position indicator "Open-Closed" Cat. II 3 G Ex nA IIC T6 Gc Cat. II 2 D Ex t IIIC T80°C Db -20°C=< Ta =< 60°C
WX2000

Warex Valve
for medium: bulk goods Properties: pourable, chemically neutral, not prone to caking Working pressure: pressureless max. allowed Working pressure : < 0.5 bar (Ps) MAWP (Note: MAWP = Ausl.-Pressure) Operating temp.: 0 °C ... + 60 °C (Ts) MAWT Ambient temp.: 0 °C ... + 50 °C (Ta) Explosion protection: II 1/3 D Ex h IIIC T85°C Da/Dc X Evaluation of the butterfly valves according to DGRL 2014/68/EU, Diagram 7, certified module A2. The fittings are not subject to the conformity assessment. Test pressure: design pressure x 1.1 bar for leak tightnessREQUIRED - Butterfly valve, type DKZE 110 <APS> DN 250 Overall length 68 mm for clamping between flanges according to EN 1092, PN 10 (see BA) with eccentric flap bearing Housing made of stainless steel 1.4408 with connection for grounding lead-out shaft with connection for grounding Flap disc made of stainless steel 1.4408 Shafts made of stainless steel 1.4057 or higher Shaft sealing with O-rings Shaft bearing in brass bush Supplied with a flat gasket made of Klingersil Support ring made of stainless steel in the housing, replaceable with replaceable profile sealing ring made of FPM black deriv. - can be clamped pneumatically against the valve disc <APS> - chamfered Clamping pressure = approx. 2-3 bar above system pressure further attachments: Pneumatic rotary drive AT 220 DR double-acting required control pressure 6.0 bar el./peum. Control for APS flaps ** 1 signal control ** Execution according to tax plan 0003475 with quick exhaust valve, without pressure regulator, with throttle silencers Solenoid valve 5/2 way function Norgren 2623077.3046 24V DC, IP65 Namur version, with manual override Cat. II 3 G Ex nA IIC T5 Gc Cat. II 3 D Ex tc IIIC T=95°C Dc Limit switch box with double sensor P+F NBB2-V3-E2-3G-3D 3-wire, pnp, normally open, 10-30 V DC, IP 66 / IP 67 installed in the aluminum housing and wired to terminal strip for position indicator "Open-Closed" Cat. II 3 G Ex nA IIC T6 Gc Cat. II 2 D Ex t IIIC T80°C Db -20°C=< Ta =< 60°C
food grade valve with actuator
DKZ 110 DN 250

Warex Valve
food grade valve with actuator
Butterfly valve, type DKZ110 DN 400 Overall length 67 mm for clamping between flanges according to EN 1092, PN 6 Housing made of silumin Flap disc made of stainless steel 1.4408 Shafts made of stainless steel 1.4057 or higher quality Shaft sealing using O-rings Shaft bearing in brass bushing Sealing sleeve made of Buna CB black replaceable in the housing further attachments: Pneumatic rotary drive Festo DAPS 0960 double-acting Version 577249 required control pressure 6.0 bar
DKZ110 DN 400

Warex Valve
Butterfly valve, type DKZ110 DN 400 Overall length 67 mm for clamping between flanges according to EN 1092, PN 6 Housing made of silumin Flap disc made of stainless steel 1.4408 Shafts made of stainless steel 1.4057 or higher quality Shaft sealing using O-rings Shaft bearing in brass bushing Sealing sleeve made of Buna CB black replaceable in the housing further attachments: Pneumatic rotary drive Festo DAPS 0960 double-acting Version 577249 required control pressure 6.0 bar
Butterfly valve, type DKZ110 DN 350 Length 67 mm for clamping between flanges according to EN 1092, PN 10 Housing made of silumin with connection for earthing Valve disc made of stainless steel 1.4408 Shafts made of stainless steel 1.4057 or higher Shaft sealing using O-rings Shaft bearing in brass bushing Sealing sleeve made of Buna CB black conductive replaceable in the housing other attachments: Pneumatic rotary actuator AT 600 DR double-acting required control pressure 6.0 bar Solenoid valve 5/2 way function Norgren 2623077.3047 230 V AC, 50/60 Hz / voltage tolerance: +/- 10% IP 65, with manual emergency operation Cat. II 3 G Ex nA IIC T5 Gc Cat. II 3 D Ex tc IIIC T=95°C Dc Limit switch box with 2 sensors P+F SC3.5-N0-BU Opener - with LED, 8 V, IP 67 installed in the housing (Vestamid) and wired to terminal block for position indication "Open + Closed" Cat. II 2G Ex ia IIC T6 Gb Cat. II 2D Ex ia IIIC T80°C Db -25°C =< Ta =< 70°C for medium: bulk material Properties: free-flowing, chemically neutral, not prone to caking Working pressure: pressureless Max. permissible operating pressure: < 0.5 bar (Ps) MAWP (Note: MAWP = discharge pressure) Operating temperature: 0 °C ... + 60 °C (Ts) MAWT Ambient temperature: 0 °C ... + 50 °C (Ta) Ex protection: II 1/3 D Ex h IIIC T85°C Da/Dc X
WX2000

Warex Valve
Butterfly valve, type DKZ110 DN 350 Length 67 mm for clamping between flanges according to EN 1092, PN 10 Housing made of silumin with connection for earthing Valve disc made of stainless steel 1.4408 Shafts made of stainless steel 1.4057 or higher Shaft sealing using O-rings Shaft bearing in brass bushing Sealing sleeve made of Buna CB black conductive replaceable in the housing other attachments: Pneumatic rotary actuator AT 600 DR double-acting required control pressure 6.0 bar Solenoid valve 5/2 way function Norgren 2623077.3047 230 V AC, 50/60 Hz / voltage tolerance: +/- 10% IP 65, with manual emergency operation Cat. II 3 G Ex nA IIC T5 Gc Cat. II 3 D Ex tc IIIC T=95°C Dc Limit switch box with 2 sensors P+F SC3.5-N0-BU Opener - with LED, 8 V, IP 67 installed in the housing (Vestamid) and wired to terminal block for position indication "Open + Closed" Cat. II 2G Ex ia IIC T6 Gb Cat. II 2D Ex ia IIIC T80°C Db -25°C =< Ta =< 70°C for medium: bulk material Properties: free-flowing, chemically neutral, not prone to caking Working pressure: pressureless Max. permissible operating pressure: < 0.5 bar (Ps) MAWP (Note: MAWP = discharge pressure) Operating temperature: 0 °C ... + 60 °C (Ts) MAWT Ambient temperature: 0 °C ... + 50 °C (Ta) Ex protection: II 1/3 D Ex h IIIC T85°C Da/Dc X
Butterfly valve, type DKZ110 DN 350 Overall length 67 mm for clamping between flanges according to EN 1092, PN 10 Silumin housing Flap disc made of stainless steel 1.4408 Shafts made of 1.4057 or higher Shaft sealing with O-rings Shaft bearing in brass bush Polyurethane sealing sleeve firmly glued in the housing Suitable for food, according to regulation (EG) No. 1935/2004 with free shaft end, square 22mm Connection according to DIN/ISO 5211, F10
5139

Warex Valve
Butterfly valve, type DKZ110 DN 350 Overall length 67 mm for clamping between flanges according to EN 1092, PN 10 Silumin housing Flap disc made of stainless steel 1.4408 Shafts made of 1.4057 or higher Shaft sealing with O-rings Shaft bearing in brass bush Polyurethane sealing sleeve firmly glued in the housing Suitable for food, according to regulation (EG) No. 1935/2004 with free shaft end, square 22mm Connection according to DIN/ISO 5211, F10
Butterfly valve, type DKZ110 DN 250 Overall length 68 mm for clamping between flanges according to EN 1092, PN 10 Silumin housing Flap disc made of stainless steel 1.4408 Shafts made of stainless steel 1.4057 or higher Shaft sealing with O-rings Shaft bearing in brass bush Sealing sleeve made of NBR black exchangeable in the housing with free shaft end, square 22mm Connection according to DIN/ISO 5211, F10 HS code. 84818085
DKZ110 DN 250

Warex Valve
Butterfly valve, type DKZ110 DN 250 Overall length 68 mm for clamping between flanges according to EN 1092, PN 10 Silumin housing Flap disc made of stainless steel 1.4408 Shafts made of stainless steel 1.4057 or higher Shaft sealing with O-rings Shaft bearing in brass bush Sealing sleeve made of NBR black exchangeable in the housing with free shaft end, square 22mm Connection according to DIN/ISO 5211, F10 HS code. 84818085
Butterfly valve, type DKZ110 DN 200 Overall length 54 mm for clamping between flanges according to EN 1092, PN 10 Silumin housing Flap disc made of stainless steel 1.4408 Shafts made of stainless steel 1.4057 or higher Shaft sealing with O-rings Shaft bearing in brass bush Sealing sleeve made of NBR black exchangeable in the housing with free shaft end, square 17mm Connection according to DIN/ISO 5211, F07 HS code. 84818085 for medium: air Properties: pourable, chemically neutral, not prone to caking Working pressure: 3.0 bar max. allowed Working pressure : 4.0 bar (Ps) MAWP (Note: MAWP = Ausl.-Pressure) Operating temp.: 0 °C ... + 60 °C (Ts) MAWT Ambient temp.: 0 °C ... + 50 °C (Ta) Explosion protection: no requirement Evaluation of the butterfly valves according to DGRL 2014/68/EU, Diagram 7, certified module A2. The fittings are not subject to the conformity assessment. Test pressure: Design pressure x 1.1 bar for tightness
DKZ110 DN 200

Warex Valve
Butterfly valve, type DKZ110 DN 200 Overall length 54 mm for clamping between flanges according to EN 1092, PN 10 Silumin housing Flap disc made of stainless steel 1.4408 Shafts made of stainless steel 1.4057 or higher Shaft sealing with O-rings Shaft bearing in brass bush Sealing sleeve made of NBR black exchangeable in the housing with free shaft end, square 17mm Connection according to DIN/ISO 5211, F07 HS code. 84818085 for medium: air Properties: pourable, chemically neutral, not prone to caking Working pressure: 3.0 bar max. allowed Working pressure : 4.0 bar (Ps) MAWP (Note: MAWP = Ausl.-Pressure) Operating temp.: 0 °C ... + 60 °C (Ts) MAWT Ambient temp.: 0 °C ... + 50 °C (Ta) Explosion protection: no requirement Evaluation of the butterfly valves according to DGRL 2014/68/EU, Diagram 7, certified module A2. The fittings are not subject to the conformity assessment. Test pressure: Design pressure x 1.1 bar for tightness
Butterfly valve, type DKZ 110, for clamping between flanges according to EN 1092, PN 10 DN 350 Overall length: 67 mm with free shaft end, square 27 mm Connection according to DIN / ISO 5211, F12 past. for drive, type: AT 600.DR
type DKZ 110 DN 350

Warex Valve
Butterfly valve, type DKZ 110, for clamping between flanges according to EN 1092, PN 10 DN 350 Overall length: 67 mm with free shaft end, square 27 mm Connection according to DIN / ISO 5211, F12 past. for drive, type: AT 600.DR
Based on Warex order no. 181307/20 (778.807.00.01) for medium: coal dust / coke dust, fluidgroup II characteristics: chemical not aggressive, not sticky working pressure: 0,7 bar max. allowable working pressure: 0,7 bar (Ps) MAWP (note: MAWP = design pressure) max. allowable working temperature: -10 °C ... + 80 °C (Ts) MAWT ambient temp.: -10 °C ... + 60 °C (Ta) Ex-protection: II 1/3 D Ex h IIIC T85°C Da/Dc X Rating of butterfly-valves according PED/2014/68/EU, diagram 7 Certified module A2 The butterfly-valves are not subject to this conformity assessment Test pressure: 4 bar for tightness in the passage + body with min. 36 bar of stability Exception solenoid valve here -10° C to +50° C Warex-butterfly valve, type DKZ103 DN 400 face to face 102 mm for mounting between flanges, drilled according to EN 1092, PN 10 body of Silumin with ground connection disc of stainless steel 1.4301 shaft of stainless steel stainless steel 1.4057 or equivalent shaft sealing with o-rings bearing bush of brass sealing element of NBR black dissip. replaceable in the housing Special equipment body: shockproof design: 17,7 bar disc of stainless steel 1.4301 - reinforced - additional attachments: pneumatic actuator Festo DAPS 0960 double acting execution 577249 air supply necessary 6,0 bar 5/2 way solenoid-valve Norgren 2623077.3046 24 V DC, IP 65 namur interface, with manual override cat. II 3 G Ex nA IIC T5 Gc cat. II 3 D Ex tc IIIC T=95°C Dc limit switch box with 2 micro switches Crouzet 83.161.801W2 gold contacts 0,1 A, 250 V AC / 0,1 A, 24 V DC mounted in TCR-housing cover and socket of vestamid black for disc positions "open-closed" incl. mounting bracket cat. II 3 D Ex tc IIIC T80°C Dc
AUFTRAGSNR:181307 - DN400 TYP:DKZ 103 1.

Warex Valve
Based on Warex order no. 181307/20 (778.807.00.01) for medium: coal dust / coke dust, fluidgroup II characteristics: chemical not aggressive, not sticky working pressure: 0,7 bar max. allowable working pressure: 0,7 bar (Ps) MAWP (note: MAWP = design pressure) max. allowable working temperature: -10 °C ... + 80 °C (Ts) MAWT ambient temp.: -10 °C ... + 60 °C (Ta) Ex-protection: II 1/3 D Ex h IIIC T85°C Da/Dc X Rating of butterfly-valves according PED/2014/68/EU, diagram 7 Certified module A2 The butterfly-valves are not subject to this conformity assessment Test pressure: 4 bar for tightness in the passage + body with min. 36 bar of stability Exception solenoid valve here -10° C to +50° C Warex-butterfly valve, type DKZ103 DN 400 face to face 102 mm for mounting between flanges, drilled according to EN 1092, PN 10 body of Silumin with ground connection disc of stainless steel 1.4301 shaft of stainless steel stainless steel 1.4057 or equivalent shaft sealing with o-rings bearing bush of brass sealing element of NBR black dissip. replaceable in the housing Special equipment body: shockproof design: 17,7 bar disc of stainless steel 1.4301 - reinforced - additional attachments: pneumatic actuator Festo DAPS 0960 double acting execution 577249 air supply necessary 6,0 bar 5/2 way solenoid-valve Norgren 2623077.3046 24 V DC, IP 65 namur interface, with manual override cat. II 3 G Ex nA IIC T5 Gc cat. II 3 D Ex tc IIIC T=95°C Dc limit switch box with 2 micro switches Crouzet 83.161.801W2 gold contacts 0,1 A, 250 V AC / 0,1 A, 24 V DC mounted in TCR-housing cover and socket of vestamid black for disc positions "open-closed" incl. mounting bracket cat. II 3 D Ex tc IIIC T80°C Dc
AT 450 DR double-acting F 12/27 required control pressure 6 bar
Pneumatic rotary drive

Warex Valve
AT 450 DR double-acting F 12/27 required control pressure 6 bar
PPFF25ESVVAZWA

Warex Valve
VAREX DKZ110 DN 400

Warex Valve
АТ150

Warex Valve
WA4D-103GS/250 34.2X3

Warex Valve
WA4D-103GS/250 30X1-POS.12

Warex Valve
WA4D-103GS/250 24.2X3-POS.11

Warex Valve
WA4D-103GS/250 24.2X2-POS.3

Warex Valve
WA4D-103GS/200 24X3-POS.14

Warex Valve