"Persta" markasına ait modeller;
WELDING -- EXPLANATION: IT WILL BE USED AT CHEMICAL DOM ENTRIES OF DISTRIBUTION COLLECTOR AND BOILERS ITEM 1: WELDED PERSTA GATE VALVE 13 CR MO 44 (1.7335) DN25 PN63 425 C
GATE VANA DN25PN63 13CRMO44

Persta
WELDING -- EXPLANATION: IT WILL BE USED AT CHEMICAL DOM ENTRIES OF DISTRIBUTION COLLECTOR AND BOILERS ITEM 1: WELDED PERSTA GATE VALVE 13 CR MO 44 (1.7335) DN25 PN63 425 C
spindle ET suitable for 700 JJ 44.2 DN 80 PN 100
Art.: 123754

Persta
spindle ET suitable for 700 JJ 44.2 DN 80 PN 100
Slide plates (2pcs = 1 set) ET suitable for 700 JJ 44.2 DN 80 PN 100
Art.: 172906

Persta
Slide plates (2pcs = 1 set) ET suitable for 700 JJ 44.2 DN 80 PN 100
Nominal diameter: 50 Pressure level / pressure: PN63 Actuation: Handwheel Attachment valve in straight form forged from 1.7335, seats stellite Flanges drilled Sealing strip according to EN 1092-1 Form B2 Requirements: Fittings> DN 25: According to Pressure Equipment Directive 2014/68 / EU, category I - III, Conformity Assessment Module H. Fittings = <DN 25: According to the Pressure Equipment Directive 2014/68 / EU, Article 4, paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
Aufsatz-Ventil 200 Ae 44.1 50/63

Persta
Nominal diameter: 50 Pressure level / pressure: PN63 Actuation: Handwheel Attachment valve in straight form forged from 1.7335, seats stellite Flanges drilled Sealing strip according to EN 1092-1 Form B2 Requirements: Fittings> DN 25: According to Pressure Equipment Directive 2014/68 / EU, category I - III, Conformity Assessment Module H. Fittings = <DN 25: According to the Pressure Equipment Directive 2014/68 / EU, Article 4, paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
EXPLANATION: IT WILL BE USED AT CHEMICAL DOM ENTRIES OF DISTRIBUTION COLLECTOR AND BOILERS ITEM 1: WELDED PERSTA GATE VALVE 13 CR MO 44(1.7335) DN40 PN63 425 C
GATE VANA DN40PN63 13CRMO44 Welding

Persta
EXPLANATION: IT WILL BE USED AT CHEMICAL DOM ENTRIES OF DISTRIBUTION COLLECTOR AND BOILERS ITEM 1: WELDED PERSTA GATE VALVE 13 CR MO 44(1.7335) DN40 PN63 425 C
SIZE : DN 25 PN: 100 actuation hand wheel
Attachment valve 200 AE 44.1 25/100

Persta
SIZE : DN 25 PN: 100 actuation hand wheel
SIZE : DN 15 PN 100 (Vr-60) actuation hand wheel
Shut-off valve 200 AE 44.1 15 / 100

Persta
SIZE : DN 15 PN 100 (Vr-60) actuation hand wheel
Shut-off valve HD91.1 200 DN50PN160 Press F10 - B1
JM 21.2 50 / 160

Persta
Shut-off valve HD91.1 200 DN50PN160 Press F10 - B1
shut-off valve 200 BE 44.8 50 / 160 PN 160 Tmax 550 °C handwheel PERSTA shut-off valve Case forged from 1.7335, case seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4021 throttle cone made of 1.7335 conical seat stellited sealing type flat seat Stuffing box packing: Graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Overall length: 250 mm Inlet: with welding socket according to EN12760 DN 50 Outlet: with welding socket according to EN12760 DN 50 required opening torque: 96 Nm required closing torque: 96 Nm with handwheel 225.00 mm designed according to EN12570 Design data: PN 160 according to EN 12516-1 (2018) TSmin: -10°C; TSmax: 550°C Test pressure (open): 240 bar Painting: Base coat with Luberpox in layer thickness 30-40µ Top coat with Lubersil in layer thickness 30-40µ in color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. fittings = <DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
DN50

Persta
shut-off valve 200 BE 44.8 50 / 160 PN 160 Tmax 550 °C handwheel PERSTA shut-off valve Case forged from 1.7335, case seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4021 throttle cone made of 1.7335 conical seat stellited sealing type flat seat Stuffing box packing: Graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Overall length: 250 mm Inlet: with welding socket according to EN12760 DN 50 Outlet: with welding socket according to EN12760 DN 50 required opening torque: 96 Nm required closing torque: 96 Nm with handwheel 225.00 mm designed according to EN12570 Design data: PN 160 according to EN 12516-1 (2018) TSmin: -10°C; TSmax: 550°C Test pressure (open): 240 bar Painting: Base coat with Luberpox in layer thickness 30-40µ Top coat with Lubersil in layer thickness 30-40µ in color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. fittings = <DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
shut-off valve 200 BE 44.8 40 / 160 PN 160 Tmax 550 °C handwheel PERSTA shut-off valve Case forged from 1.7335, case seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4021 throttle cone made of 1.7335 conical seat stellited sealing type flat seat Stuffing box packing: Graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Overall length: 210 mm Inlet: with welding socket according to EN12760 DN 40 Outlet: with welding socket according to EN12760 DN 40 required opening torque: 96 Nm required closing torque: 96 Nm with handwheel 225.00 mm designed according to EN12570 Design data: PN 160 according to EN 12516-1 (2018) TSmin: -10°C; TSmax: 550°C Test pressure (open): 240 bar Painting: Base coat with Luberpox in layer thickness 30-40µ Top coat with Lubersil in layer thickness 30-40µ in color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. fittings = <DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
DN40

Persta
shut-off valve 200 BE 44.8 40 / 160 PN 160 Tmax 550 °C handwheel PERSTA shut-off valve Case forged from 1.7335, case seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4021 throttle cone made of 1.7335 conical seat stellited sealing type flat seat Stuffing box packing: Graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Overall length: 210 mm Inlet: with welding socket according to EN12760 DN 40 Outlet: with welding socket according to EN12760 DN 40 required opening torque: 96 Nm required closing torque: 96 Nm with handwheel 225.00 mm designed according to EN12570 Design data: PN 160 according to EN 12516-1 (2018) TSmin: -10°C; TSmax: 550°C Test pressure (open): 240 bar Painting: Base coat with Luberpox in layer thickness 30-40µ Top coat with Lubersil in layer thickness 30-40µ in color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. fittings = <DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
shut-off valve 200 BE 44.8 25 / 160 PN 160 Tmax 550 °C handwheel PERSTA shut-off valve Case forged from 1.7335, case seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4021 throttle cone made of 1.7335 conical seat stellited sealing type flat seat Stuffing box packing: Graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Overall length: 230 mm Inlet: with welding socket according to EN12760 DN 25 Outlet: with welding socket according to EN12760 DN 25 required opening torque: 35 Nm required closing torque: 35 Nm with handwheel 180.00 mm designed according to EN12570 Design data: PN 160 according to EN 12516-1 (2018) TSmin: -10°C; TSmax: 550°C Test pressure (open): 240 bar Painting: Base coat with Luberpox in layer thickness 30-40µ Top coat with Lubersil in layer thickness 30-40µ in color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. fittings = <DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
DN25

Persta
shut-off valve 200 BE 44.8 25 / 160 PN 160 Tmax 550 °C handwheel PERSTA shut-off valve Case forged from 1.7335, case seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4021 throttle cone made of 1.7335 conical seat stellited sealing type flat seat Stuffing box packing: Graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Overall length: 230 mm Inlet: with welding socket according to EN12760 DN 25 Outlet: with welding socket according to EN12760 DN 25 required opening torque: 35 Nm required closing torque: 35 Nm with handwheel 180.00 mm designed according to EN12570 Design data: PN 160 according to EN 12516-1 (2018) TSmin: -10°C; TSmax: 550°C Test pressure (open): 240 bar Painting: Base coat with Luberpox in layer thickness 30-40µ Top coat with Lubersil in layer thickness 30-40µ in color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. fittings = <DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
shut-off valve 200 BE 42.8 15 / 160 PN 160 Tmax 530 °C handwheel PERSTA shut-off valve Case forged from 1.5415, case seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4021 throttle cone made of 1.7335 conical seat stellited sealing type flat seat Stuffing box packing: Graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Overall length: 150 mm Inlet: with welding socket according to EN12760 DN 15 Outlet: with welding socket according to EN12760 DN 15 required opening torque: 35 Nm required closing torque: 35 Nm with handwheel 180.00 mm designed according to EN12570 Design data: PN 160 according to EN 12516-1 (2018) TSmin: -10°C; TSmax: 530°C Test pressure (open): 240 bar Painting: Base coat with Luberpox in layer thickness 30-40µ Top coat with Lubersil in layer thickness 30-40µ in color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. fittings = <DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
DN15

Persta
shut-off valve 200 BE 42.8 15 / 160 PN 160 Tmax 530 °C handwheel PERSTA shut-off valve Case forged from 1.5415, case seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4021 throttle cone made of 1.7335 conical seat stellited sealing type flat seat Stuffing box packing: Graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Overall length: 150 mm Inlet: with welding socket according to EN12760 DN 15 Outlet: with welding socket according to EN12760 DN 15 required opening torque: 35 Nm required closing torque: 35 Nm with handwheel 180.00 mm designed according to EN12570 Design data: PN 160 according to EN 12516-1 (2018) TSmin: -10°C; TSmax: 530°C Test pressure (open): 240 bar Painting: Base coat with Luberpox in layer thickness 30-40µ Top coat with Lubersil in layer thickness 30-40µ in color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. fittings = <DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
Plate-type circular slide valve
2000 700 JJ 21.1 150/16

Persta
Plate-type circular slide valve
Plate type circular slide valve Plate-type circular slide valve • 700 JJ 21.1 200/63 Plate-type circular gate valve with external spindle thread forged from 1.0460, hard armored seats Flanges drilled Sealing strip according to EN 1092-1 Form B2 Design data: PN 63 according to DIN EN 1092-1 (2018) TSmin: -10°C; TSmax: 450°C Test pressure (open): 95 bar Painting: Standard paint Substrate purity SA 2.5 Top coat = Luxoral Aqua Primer matt 1-component flood primer based on alkyd resins with active corrosion protection pigments Color: PERSTA Blue (similar to RAL 5007) Dry film thickness: approx. 30 - 50 mµ Paint manufacturer: Mäder Lacke Quality measure: Requirements: Valves of category I - III, according to Pressure Equipment Directive 2014/68/EU, Conformity assessment procedure Module H and AD2000 Leaflet A4. Fittings = <DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE marking) Final acceptance with inspection certificate according to EN 10204 / 3.1
700 JJ 21.1 200/63

Persta
Plate type circular slide valve Plate-type circular slide valve • 700 JJ 21.1 200/63 Plate-type circular gate valve with external spindle thread forged from 1.0460, hard armored seats Flanges drilled Sealing strip according to EN 1092-1 Form B2 Design data: PN 63 according to DIN EN 1092-1 (2018) TSmin: -10°C; TSmax: 450°C Test pressure (open): 95 bar Painting: Standard paint Substrate purity SA 2.5 Top coat = Luxoral Aqua Primer matt 1-component flood primer based on alkyd resins with active corrosion protection pigments Color: PERSTA Blue (similar to RAL 5007) Dry film thickness: approx. 30 - 50 mµ Paint manufacturer: Mäder Lacke Quality measure: Requirements: Valves of category I - III, according to Pressure Equipment Directive 2014/68/EU, Conformity assessment procedure Module H and AD2000 Leaflet A4. Fittings = <DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE marking) Final acceptance with inspection certificate according to EN 10204 / 3.1

Plate slide valve 2000 • 700 JJ 44.1 150 / 100 PERSTA plate gate valve 2000 Case forged from 1.7335, seats armored with Stellite 6 Cover seal: Kammprofile 1.7335 with graphite coating Cover screws/nuts: 1.4923/1.4923 with external spindle thread Spindle made of 1.4122 Stuffing box packing: graphite sleeve Stuffing box bolts/nuts: 1.1181/1.1181 needle bearing threaded bushing made of CW713R Overall length: 450 mm Inlet: Flange PN 100 according to EN 1092-1, sealing face form B2 Outlet: Flange PN 100 according to EN 1092-1, sealing face form B2 required opening torque: 207 Nm required closing torque: 138 Nm with mounting flange F14 - B1 including connecting parts Design data: PN 100 according to DIN EN 1092-1 (2018) TSmin: -10°C; TSmax: 570°C Test pressure (open): 150 bar Painting: Primer coat with Luberpox in layer thickness 30-40µ Top coat with Lubersil in layer thickness 30-40µ in color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. Fittings = <DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark) Final acceptance with inspection certificate according to EN 10204 / 3.1
Plate slide valve 2000

Persta
Plate slide valve 2000 • 700 JJ 44.1 150 / 100 PERSTA plate gate valve 2000 Case forged from 1.7335, seats armored with Stellite 6 Cover seal: Kammprofile 1.7335 with graphite coating Cover screws/nuts: 1.4923/1.4923 with external spindle thread Spindle made of 1.4122 Stuffing box packing: graphite sleeve Stuffing box bolts/nuts: 1.1181/1.1181 needle bearing threaded bushing made of CW713R Overall length: 450 mm Inlet: Flange PN 100 according to EN 1092-1, sealing face form B2 Outlet: Flange PN 100 according to EN 1092-1, sealing face form B2 required opening torque: 207 Nm required closing torque: 138 Nm with mounting flange F14 - B1 including connecting parts Design data: PN 100 according to DIN EN 1092-1 (2018) TSmin: -10°C; TSmax: 570°C Test pressure (open): 150 bar Painting: Primer coat with Luberpox in layer thickness 30-40µ Top coat with Lubersil in layer thickness 30-40µ in color RAL 9007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. Fittings = <DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark) Final acceptance with inspection certificate according to EN 10204 / 3.1
Plate slide valve 2000 • 700 JJ 21.1 80 / 63 PERSTA plate gate valve 2000 Housing forged from 1.0460, seats hard armored Cover seal: graphite foil Cover screws/nuts: 1.7225/1.1181 with external spindle thread Spindle made of 1.4021 Stuffing box packing: graphite sleeve Stuffing box bolts/nuts: 1.1181/1.1181 needle bearing threaded bushing made of 1.0718 Overall length: 310 mm Inlet: Flange PN 63 according to EN 1092-1, sealing face form B2 Outlet: Flange PN 63 according to EN 1092-1, sealing face form B2 required opening torque: 35 Nm required closing torque: 24 Nm with handwheel 225 mm designed according to EN12570 Design data: PN 63 according to DIN EN 1092-1 (2018) TSmin: -10°C; TSmax: 450°C Test pressure (open): 95 bar Painting: Top coat with Luxoral Aqua Primer matt in layer thickness 30-50μ in color RAL 5007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. Fittings = <DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark) Final acceptance with inspection certificate according to EN 10204 / 3.1
700 JJ 21.1 80 / 63

Persta
Plate slide valve 2000 • 700 JJ 21.1 80 / 63 PERSTA plate gate valve 2000 Housing forged from 1.0460, seats hard armored Cover seal: graphite foil Cover screws/nuts: 1.7225/1.1181 with external spindle thread Spindle made of 1.4021 Stuffing box packing: graphite sleeve Stuffing box bolts/nuts: 1.1181/1.1181 needle bearing threaded bushing made of 1.0718 Overall length: 310 mm Inlet: Flange PN 63 according to EN 1092-1, sealing face form B2 Outlet: Flange PN 63 according to EN 1092-1, sealing face form B2 required opening torque: 35 Nm required closing torque: 24 Nm with handwheel 225 mm designed according to EN12570 Design data: PN 63 according to DIN EN 1092-1 (2018) TSmin: -10°C; TSmax: 450°C Test pressure (open): 95 bar Painting: Top coat with Luxoral Aqua Primer matt in layer thickness 30-50μ in color RAL 5007 Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure Module H. Fittings = <DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark) Final acceptance with inspection certificate according to EN 10204 / 3.1
Plate slide valve 2000
700 JJ 21.2 80 / 100

Persta
Plate slide valve 2000
Plate round valve DN 200 PN 25 Plate round valve • 700 JJ 21.1 200/25 Tmin -10 °C; Tmax 400 °C Handwheel Round plate valve with external spindle thread Forged from 1.0460, hard armored seats Flanges drilled Sealing strip according to EN 1092-1 Form B1 Design data: PN 25 according to DIN 2401 (1966) TSmin -10 °C; TSmax 400 °C Test pressure (open): 38 bar Painting: Standard paint Underground purity level SA 2.5 Top coat = Luxoral Aqua Primer matt 1-comp. Flood primer based on alkyd resins with active anti-corrosion pigments Color: PERSTA blue (similar to RAL 5007) Dry film thickness: approx. 30 - 50 mµ Paint manufacturer: Mäder Lacke Quality measure: Requirements: Fittings of category I - III, according to the Pressure Equipment Directive 2014/68/EU, Conformity assessment procedure Module H and AD2000 leaflet A4. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark)
700 JJ 21.1 200/25

Persta
Plate round valve DN 200 PN 25 Plate round valve • 700 JJ 21.1 200/25 Tmin -10 °C; Tmax 400 °C Handwheel Round plate valve with external spindle thread Forged from 1.0460, hard armored seats Flanges drilled Sealing strip according to EN 1092-1 Form B1 Design data: PN 25 according to DIN 2401 (1966) TSmin -10 °C; TSmax 400 °C Test pressure (open): 38 bar Painting: Standard paint Underground purity level SA 2.5 Top coat = Luxoral Aqua Primer matt 1-comp. Flood primer based on alkyd resins with active anti-corrosion pigments Color: PERSTA blue (similar to RAL 5007) Dry film thickness: approx. 30 - 50 mµ Paint manufacturer: Mäder Lacke Quality measure: Requirements: Fittings of category I - III, according to the Pressure Equipment Directive 2014/68/EU, Conformity assessment procedure Module H and AD2000 leaflet A4. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark)
PERSTA valve HD 91 - manual override Housing forged from 1.0460 Bracket attachment cast from 1.7379 Taper spindle made of 1.4122 Housing seat stellite Tapered seat inductively hardened needle bearing threaded bush made of 1.0718 tenifer hardened with throttle cone Gland gland with dirt wiper with welding ends according to EN 12627-2 for tube 33.7 x 5.0 mm Design data: PN 160 according to DIN EN 12516-1 Paintwork: standard painting Substrate cleanliness level SA 2.5 Top coat = Luxoral Aqua Primer matt 1 comp. Flow primer based on alkyd resins with active anti-corrosion pigments Colour: PERSTA blue (similar to RAL 5007) Dry film thickness: approx. 30 - 50 mμ Paint manufacturer: Mäder Lacke Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure module H. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, Paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
Valve HD 91.1 200 JM 21.2 25/160

Persta
PERSTA valve HD 91 - manual override Housing forged from 1.0460 Bracket attachment cast from 1.7379 Taper spindle made of 1.4122 Housing seat stellite Tapered seat inductively hardened needle bearing threaded bush made of 1.0718 tenifer hardened with throttle cone Gland gland with dirt wiper with welding ends according to EN 12627-2 for tube 33.7 x 5.0 mm Design data: PN 160 according to DIN EN 12516-1 Paintwork: standard painting Substrate cleanliness level SA 2.5 Top coat = Luxoral Aqua Primer matt 1 comp. Flow primer based on alkyd resins with active anti-corrosion pigments Colour: PERSTA blue (similar to RAL 5007) Dry film thickness: approx. 30 - 50 mμ Paint manufacturer: Mäder Lacke Quality measure: Requirements: Fittings >DN 25: According to Pressure Equipment Directive 2014/68/EU, Category I - III, Conformity assessment procedure module H. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, Paragraph (3), (without CE mark) Final acceptance with acceptance test certificate according to EN 10204 / 3.1
PERSTA shut-off valve Housing forged from 1.7335, housing seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4021 (Tmax. 550°C) Flat cone made of 1.7335 Conical seat stellitated Sealing type flat seat Stuffing box packing: graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Length: 160 mm Entry: with welding end for pipe: 33.70 x 3.20 mm Joint shape according to EN12627 Figure 2 Type B Da/Di according to EN12627 Exit: with welding end for pipe: 33.70 x 3.20 mm Joint shape according to EN12627 Figure 2 Type B Da/Di according to EN12627 Required opening torque: 35 Nm Required closing torque: 35 Nm with handwheel O 180.00 mm Design data: PN 160 according to DIN 2401 (1966) Test pressure (open): 240.0 bar Painting: Standard paint Surface treatment: degreasing, sanding or blasting Substrate = Luberpox 1K zinc dust base color 30 µm to 40 µm Top coat = Lubersil 1K single coat and top coat paint 30 µm to 40 µm Total layer thickness up to 80 µm Color: silver gray/aluminum (similar to RAL 9007) max. permissible temperature 600°C Paint manufacturer: Phil.Berger Lack- und chem. Fabrik GmbH Quality measure: Requirements: Fittings of category I - III, according to the Pressure Equipment Directive 2014/68/EU, Conformity assessment procedure Module H and AD2000 leaflet A4. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark)
Attachment valve • 200 AE 44.2 25/160

Persta
PERSTA shut-off valve Housing forged from 1.7335, housing seat armored with Stellite 6 Bow lid forged from 1.7335 Lid seal: graphite foil Cover screws/nuts: 1.4923/1.4923 with rotating, rising spindle made of 1.4021 (Tmax. 550°C) Flat cone made of 1.7335 Conical seat stellitated Sealing type flat seat Stuffing box packing: graphite sleeve Stuffing box screws/nuts: 1.7225/1.7218 Pressure direction: under the cone Length: 160 mm Entry: with welding end for pipe: 33.70 x 3.20 mm Joint shape according to EN12627 Figure 2 Type B Da/Di according to EN12627 Exit: with welding end for pipe: 33.70 x 3.20 mm Joint shape according to EN12627 Figure 2 Type B Da/Di according to EN12627 Required opening torque: 35 Nm Required closing torque: 35 Nm with handwheel O 180.00 mm Design data: PN 160 according to DIN 2401 (1966) Test pressure (open): 240.0 bar Painting: Standard paint Surface treatment: degreasing, sanding or blasting Substrate = Luberpox 1K zinc dust base color 30 µm to 40 µm Top coat = Lubersil 1K single coat and top coat paint 30 µm to 40 µm Total layer thickness up to 80 µm Color: silver gray/aluminum (similar to RAL 9007) max. permissible temperature 600°C Paint manufacturer: Phil.Berger Lack- und chem. Fabrik GmbH Quality measure: Requirements: Fittings of category I - III, according to the Pressure Equipment Directive 2014/68/EU, Conformity assessment procedure Module H and AD2000 leaflet A4. Fittings =<DN 25: According to Pressure Equipment Directive 2014/68/EU, Article 4, paragraph (3), (without CE mark)