"Maxcess" markasına ait modeller;
DIGITAL SIGNAL AMPLIFIER DIGITAL SIGNAL AMPLIFIER Model DP-20 CE / UL / cUL certified Dimensions 144x144x90 mm (cable not included), Weight 1.6 kg, as a slide-in housing (cut-out 137x137 mm), Operating temperature 0 ° - 50 ° C Protection class IP-54 Control panel consisting of a membrane keyboard with 8 keys and a 4-line LCD monitor with 16 characters each with the following functions: - left edge / right edge / middle / line control - Automatic / centering / manual - Pushbuttons left / right - Sensor adjustment / control point adjustment - automatic adjustment of all control parameters - automatic sensor adjustment for transparent materials - automatic detection of the connected motor 1 parallel interface with 6 inputs and 2 alarm outputs, open pantographs Power supply 130 VA at 100-240 V 50/60 Hz +/- 10% stat. Product number: 8542 33 10
Modell Dp-20

Maxcess
DIGITAL SIGNAL AMPLIFIER DIGITAL SIGNAL AMPLIFIER Model DP-20 CE / UL / cUL certified Dimensions 144x144x90 mm (cable not included), Weight 1.6 kg, as a slide-in housing (cut-out 137x137 mm), Operating temperature 0 ° - 50 ° C Protection class IP-54 Control panel consisting of a membrane keyboard with 8 keys and a 4-line LCD monitor with 16 characters each with the following functions: - left edge / right edge / middle / line control - Automatic / centering / manual - Pushbuttons left / right - Sensor adjustment / control point adjustment - automatic adjustment of all control parameters - automatic sensor adjustment for transparent materials - automatic detection of the connected motor 1 parallel interface with 6 inputs and 2 alarm outputs, open pantographs Power supply 130 VA at 100-240 V 50/60 Hz +/- 10% stat. Product number: 8542 33 10
290005196 # 224673 FIFE line sensor Model SE-26B with 0.3m cable Type of reflection light (contrast) According to drawing 795545 Proportional band 4,200 mm Distance to the track 10,000 mm Protection class IP-65 for web guiding according to: - Line (min. 2.5mm wide) and line edges, also interrupted - Edges of transparent and non-transparent material replaces article SE-26A
Se-26b With 0.3m Cable (M435651)

Maxcess
290005196 # 224673 FIFE line sensor Model SE-26B with 0.3m cable Type of reflection light (contrast) According to drawing 795545 Proportional band 4,200 mm Distance to the track 10,000 mm Protection class IP-65 for web guiding according to: - Line (min. 2.5mm wide) and line edges, also interrupted - Edges of transparent and non-transparent material replaces article SE-26A
214601-001# Operator Interface Assembly Fife 500 Web Guiding System
M368835

Maxcess
214601-001# Operator Interface Assembly Fife 500 Web Guiding System
TIDLAND paper cutting knife holder: PSA2 (0.50) S-AR-N The patented TIDLAND 'Performance' knife holder has a unique 3-function Selector switch [only in the automatic version] equipped for easy handling. Thanks to the additional automatic half-lift function, the knife can can be delivered to the lower knife safely, quickly and easily. The handling of the Knife holder is also due to the easily exchangeable connecting wedge, a fast and safe possibility of changing the cutting head and the dust-protected one Design further simplified. By combining these properties with the With the optional 360 ° knife protection it is possible to reduce the downtime and the safety To improve knife changes. TIDLAND knife holder 'performance scissor cut', 'automatic' - class 'II' Knife holder type: A automatic Knife diameter: 2 class 2 = 150 Cutting angle: 0.50 Cutting head: S S = Swing 360 ° knife protection is optionally available. Direction of web travel: A Cutting edge: R / R = to the right of the lower knife Clamping: N without Knife material: X155 CrVMo 121 (standard) Additional special knives for special applications can be added as an option. Minimum cutting width: 49.0 mm (knife holder) Max. Speed: 1680 m / min (knife holder) At least 5 μm filtered, oil- and water-free, regulated air must be used will.
M331678

Maxcess
TIDLAND paper cutting knife holder: PSA2 (0.50) S-AR-N The patented TIDLAND 'Performance' knife holder has a unique 3-function Selector switch [only in the automatic version] equipped for easy handling. Thanks to the additional automatic half-lift function, the knife can can be delivered to the lower knife safely, quickly and easily. The handling of the Knife holder is also due to the easily exchangeable connecting wedge, a fast and safe possibility of changing the cutting head and the dust-protected one Design further simplified. By combining these properties with the With the optional 360 ° knife protection it is possible to reduce the downtime and the safety To improve knife changes. TIDLAND knife holder 'performance scissor cut', 'automatic' - class 'II' Knife holder type: A automatic Knife diameter: 2 class 2 = 150 Cutting angle: 0.50 Cutting head: S S = Swing 360 ° knife protection is optionally available. Direction of web travel: A Cutting edge: R / R = to the right of the lower knife Clamping: N without Knife material: X155 CrVMo 121 (standard) Additional special knives for special applications can be added as an option. Minimum cutting width: 49.0 mm (knife holder) Max. Speed: 1680 m / min (knife holder) At least 5 μm filtered, oil- and water-free, regulated air must be used will.
M439072 Software: Mxxxxxx ??? Digital signal amplifier Fife D-MAXE-2 (DOUBLE DRIVE) for applications with two drives Supply voltage 24/48 Vdc IP protection class IP-54 Dimensions 184 x 87 x 60mm Operating temperature 0°-60"C CE / UL / cUL certified 2 Ethernet interfaces (M12) / 1 serial interface 1 parallel port with 6 inputs and 2 outputs
D-MAXE-2 (DOUBLE DRIVE)

Maxcess
M439072 Software: Mxxxxxx ??? Digital signal amplifier Fife D-MAXE-2 (DOUBLE DRIVE) for applications with two drives Supply voltage 24/48 Vdc IP protection class IP-54 Dimensions 184 x 87 x 60mm Operating temperature 0°-60"C CE / UL / cUL certified 2 Ethernet interfaces (M12) / 1 serial interface 1 parallel port with 6 inputs and 2 outputs
M377927 FIFE web edge sensor with 0.14 m cable Type Optical with Air Sweep According to drawing 751631 Proportional Band 300,000mm Fork width 35,000 mm Fork depth 340,000 mm Protection class IP-65
DSE-17-300

Maxcess
M377927 FIFE web edge sensor with 0.14 m cable Type Optical with Air Sweep According to drawing 751631 Proportional Band 300,000mm Fork width 35,000 mm Fork depth 340,000 mm Protection class IP-65
M280746 FIFE web edge sensor Type Optical According to drawing 686319 Proportional Band 17,000mm Fork column 51,000 mm Fork width 51,000 mm Protection class IP-40
SE-42R with 80mm cable

Maxcess
M280746 FIFE web edge sensor Type Optical According to drawing 686319 Proportional Band 17,000mm Fork column 51,000 mm Fork width 51,000 mm Protection class IP-40
Fife SE-42 Infrared Light Sensor Specifications
FIFE-42R M280746

Maxcess
Fife SE-42 Infrared Light Sensor Specifications

FIFE web edge sensor Model SE-44 with 80mm cable type ultrasound According to drawing 683742 Proportional Band 10,000mm Fork width 39,000 mm Fork depth 51,000mm Protection class IP-40
M266337

Maxcess
FIFE web edge sensor Model SE-44 with 80mm cable type ultrasound According to drawing 683742 Proportional Band 10,000mm Fork width 39,000 mm Fork depth 51,000mm Protection class IP-40
FIFE SYMAT 25 OFFSET PIVOT GUIDE
SYMAT 25 WITH ISCT 03-5MT

Maxcess
FIFE SYMAT 25 OFFSET PIVOT GUIDE

DSE-11 mit 0,15m Kabel Type Optical According to drawing 789231 Proportional band 10,000 mm Fork width 25,000 mm Fork depth 25,000 mm Protection class IP-54
M431023

Maxcess
DSE-11 mit 0,15m Kabel Type Optical According to drawing 789231 Proportional band 10,000 mm Fork width 25,000 mm Fork depth 25,000 mm Protection class IP-54
685850-0100 SENSOR SIGNAL LINE SE-42/44, SE-46C, DSE to AMPLIFIER Length= 10m
M281384

Maxcess
685850-0100 SENSOR SIGNAL LINE SE-42/44, SE-46C, DSE to AMPLIFIER Length= 10m
569016-210 Signal cable ELOC-31 10m to CDP-01, for external interlocking
M145517

Maxcess
569016-210 Signal cable ELOC-31 10m to CDP-01, for external interlocking
534733-005#541801 ENGINE LEAD CDP-01, DMAX LINEAR ACTUATOR L=5m
M136076

Maxcess
534733-005#541801 ENGINE LEAD CDP-01, DMAX LINEAR ACTUATOR L=5m
SIGNAL CABLE MOTOR/CDP01 5M
CDP01 5M

Maxcess
SIGNAL CABLE MOTOR/CDP01 5M

DSE-17-420 INFRARED SENSOR AIR SWEEP (M400344 )
M400344

Maxcess
DSE-17-420 INFRARED SENSOR AIR SWEEP (M400344 )

DSE-17-300 INFRARED SENSOR AIR SWEEP (M377927 )
M377927

Maxcess
DSE-17-300 INFRARED SENSOR AIR SWEEP (M377927 )

DSE-17-160 INFRARED SENSOR AIR SWEEP (M376854) – SW - M42052
M376854

Maxcess
DSE-17-160 INFRARED SENSOR AIR SWEEP (M376854) – SW - M42052

15283679-10

Maxcess
SP20160150

Maxcess