"Kromschröder" markasına ait modeller;
Gas burner control unit Replaces mat. no. 84620630, compatible Ignites and monitors gas burners for continuous operation Ionization monitoring, switch-off sensitivity adjustable, display for program status and flame signal strength, IP 54, EC model tested and certified, FM and CSA approved Series 200 Ionization or UV monitoring Immediate shutdown or restart after flame failure, switchable Safety time start-up: 5 s Safety time operation: 1 s Mains voltage 230 V~, 50/60 Hz
IFD 258-5/1W

Kromschröder
Gas burner control unit Replaces mat. no. 84620630, compatible Ignites and monitors gas burners for continuous operation Ionization monitoring, switch-off sensitivity adjustable, display for program status and flame signal strength, IP 54, EC model tested and certified, FM and CSA approved Series 200 Ionization or UV monitoring Immediate shutdown or restart after flame failure, switchable Safety time start-up: 5 s Safety time operation: 1 s Mains voltage 230 V~, 50/60 Hz
Gas burner control unit Replaces mat. no. 84620630, compatible Ignites and monitors gas burners for continuous operation Ionization monitoring, switch-off sensitivity adjustable, display for program status and flame signal strength, IP 54, EC model tested and certified, FM and CSA approved Series 200 Ionization or UV monitoring Immediate shutdown or restart after flame failure, switchable Safety time start-up: 5 s Safety time operation: 1 s Mains voltage 230 V~, 50/60 Hz
IFD 258-5/1W

Kromschröder
Gas burner control unit Replaces mat. no. 84620630, compatible Ignites and monitors gas burners for continuous operation Ionization monitoring, switch-off sensitivity adjustable, display for program status and flame signal strength, IP 54, EC model tested and certified, FM and CSA approved Series 200 Ionization or UV monitoring Immediate shutdown or restart after flame failure, switchable Safety time start-up: 5 s Safety time operation: 1 s Mains voltage 230 V~, 50/60 Hz
Gas burner control unit Ignites and monitors gas burners, for continuous operation, Ad for Program status and flame signal strength, IP 54, EC type tested and certified, FM and CSA approved Series 200 Ionization monitoring Restart after flameout Safety time start-up: 3 s Safety time operation: 1 s Mains voltage 230 V~, 50/60 Hz
IFD 244-3/1W

Kromschröder
Gas burner control unit Ignites and monitors gas burners, for continuous operation, Ad for Program status and flame signal strength, IP 54, EC type tested and certified, FM and CSA approved Series 200 Ionization monitoring Restart after flameout Safety time start-up: 3 s Safety time operation: 1 s Mains voltage 230 V~, 50/60 Hz
gas burner control unit replaces Mat.No. 84620650, compatible Ignites and monitors gas burners, for continuous operation with ionization monitoring, shutdown sensitivity adjustable, display for program status and flame signal strength, IP 54, EC type tested and certified, FM and CSA approved 200 series ionization or UV monitoring Immediate shutdown or restart after flameout, switchable Safety time start-up: 10 s Safety time operation: 1 s Mains voltage 230 V~, 50/60 Hz
84621650 IFD 258-10/1W

Kromschröder
gas burner control unit replaces Mat.No. 84620650, compatible Ignites and monitors gas burners, for continuous operation with ionization monitoring, shutdown sensitivity adjustable, display for program status and flame signal strength, IP 54, EC type tested and certified, FM and CSA approved 200 series ionization or UV monitoring Immediate shutdown or restart after flameout, switchable Safety time start-up: 10 s Safety time operation: 1 s Mains voltage 230 V~, 50/60 Hz
gas burner control unit replaces Mat.No. 84620610 IFS 258-3/1W, compatible Ignites and monitors gas burners, for continuous operation with ionization monitoring, shutdown sensitivity adjustable, display for program status and flame signal strength, IP 54, EC type tested and certified, FM and CSA approved 200 series ionization or UV monitoring Immediate shutdown or restart after flameout, switchable Safety time start-up: 3 s Safety time operation: 1 s Mains voltage 230 V~, 50/60 Hz
84621610 IFD 258-3/1W

Kromschröder
gas burner control unit replaces Mat.No. 84620610 IFS 258-3/1W, compatible Ignites and monitors gas burners, for continuous operation with ionization monitoring, shutdown sensitivity adjustable, display for program status and flame signal strength, IP 54, EC type tested and certified, FM and CSA approved 200 series ionization or UV monitoring Immediate shutdown or restart after flameout, switchable Safety time start-up: 3 s Safety time operation: 1 s Mains voltage 230 V~, 50/60 Hz
Gas burner control unit 84621650 Ignites and monitors gas burners for continuous operation Ionization monitoring, switch-off sensitivity adjustable, display for program status and flame signal strength, IP 54, EC model tested and certified, FM and CSA approved Series 200 Ionization or UV monitoring Immediate shutdown or restart after flame failure, switchable Safety time start-up: 10 s Safety time operation: 1 s Mains voltage 230 V~, 50/60 Hz
IFD 258-10/1W

Kromschröder
Gas burner control unit 84621650 Ignites and monitors gas burners for continuous operation Ionization monitoring, switch-off sensitivity adjustable, display for program status and flame signal strength, IP 54, EC model tested and certified, FM and CSA approved Series 200 Ionization or UV monitoring Immediate shutdown or restart after flame failure, switchable Safety time start-up: 10 s Safety time operation: 1 s Mains voltage 230 V~, 50/60 Hz
FMS 065-16 flange mounting kit Nominal width: DN 65 /PN 16 according to DIN 30690-1 and DVGW Information G19 consisting of: 1 piece Refalit - gas seal, incl. WAZ HTB approval according to VP 401 up to 5 bar HTB approved including marking 4 hexagonal screws, nuts M16, 6 washers, hardened hardness class 200 HV and 2 serrated lock washers, DIN 6798, incl. recommended tightening torques calculated according to DIN 30690_1
48115104

Kromschröder
FMS 065-16 flange mounting kit Nominal width: DN 65 /PN 16 according to DIN 30690-1 and DVGW Information G19 consisting of: 1 piece Refalit - gas seal, incl. WAZ HTB approval according to VP 401 up to 5 bar HTB approved including marking 4 hexagonal screws, nuts M16, 6 washers, hardened hardness class 200 HV and 2 serrated lock washers, DIN 6798, incl. recommended tightening torques calculated according to DIN 30690_1
Flow rate controller with solenoid valve For securing and regulating the gas pressure, pressure regulator Class A according to EN 88, class A solenoid valve according to EN 161, for gas and air, also for Biogas, pu max. 500 mbar (7 psig), with control lamp, IP 65 Size: 1 Certification: EU certified Inlet: DN 25 (1'') Outlet: DN 25 (1'') Pipe connection: Rp internal thread Opening behaviour: Quick opening, quick closing Mains voltage: 230 V~, 50/60 Hz Electrical connection: plug with socket Mounted on the left side of the junction box: connector for Valve (3 pole) Valve Seat: Normal Connection set for air control pressure psa: 1 Compression fitting, 2 Stat. Lot number 84818059
VAH 125R/NWAE

Kromschröder
Flow rate controller with solenoid valve For securing and regulating the gas pressure, pressure regulator Class A according to EN 88, class A solenoid valve according to EN 161, for gas and air, also for Biogas, pu max. 500 mbar (7 psig), with control lamp, IP 65 Size: 1 Certification: EU certified Inlet: DN 25 (1'') Outlet: DN 25 (1'') Pipe connection: Rp internal thread Opening behaviour: Quick opening, quick closing Mains voltage: 230 V~, 50/60 Hz Electrical connection: plug with socket Mounted on the left side of the junction box: connector for Valve (3 pole) Valve Seat: Normal Connection set for air control pressure psa: 1 Compression fitting, 2 Stat. Lot number 84818059
Flow rate controller with solenoid valve For securing and regulating the gas pressure, pressure regulator Class A according to EN 88, class A solenoid valve according to EN 161, for gas and air, also for Biogas, pu max. 500 mbar (7 psig), with control lamp, IP 65 Size: 1 Certification: EU certified Inlet: DN 15 (1/2'') Outlet: DN 15 (1/2'') Pipe connection: Rp internal thread Opening behaviour: Quick opening, quick closing Mains voltage: 230 V~, 50/60 Hz Valve seat: Reduced Connection set for air control pressure psa: 1 Compression fitting, 2 Test nozzles pd and psa Accessories on the right: 2 screw plugs Accessories on the left: 2 locking screws
VAH 115R/NWBE

Kromschröder
Flow rate controller with solenoid valve For securing and regulating the gas pressure, pressure regulator Class A according to EN 88, class A solenoid valve according to EN 161, for gas and air, also for Biogas, pu max. 500 mbar (7 psig), with control lamp, IP 65 Size: 1 Certification: EU certified Inlet: DN 15 (1/2'') Outlet: DN 15 (1/2'') Pipe connection: Rp internal thread Opening behaviour: Quick opening, quick closing Mains voltage: 230 V~, 50/60 Hz Valve seat: Reduced Connection set for air control pressure psa: 1 Compression fitting, 2 Test nozzles pd and psa Accessories on the right: 2 screw plugs Accessories on the left: 2 locking screws
flow meter For non-calibratable gas metering, display of consumed quantity, with pulse generators E1 and E200 Nominal flow: 400 m3/h Measuring range 32-650 m3/h(b) intermediate flange DN 100, E1: 1 pulse/m3, E200: 187.5 pulse/m3 PU max. 16 bar QA 400Z100-160 Flow meters For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 400 m3/h, measuring range: 32-650 m3/h(b) Intermediate flange DN 100, E1: 1 pulse/m3, E200: 187.5 pulses/m3 PU max. 16 bar
QA 400Z100-160

Kromschröder
flow meter For non-calibratable gas metering, display of consumed quantity, with pulse generators E1 and E200 Nominal flow: 400 m3/h Measuring range 32-650 m3/h(b) intermediate flange DN 100, E1: 1 pulse/m3, E200: 187.5 pulse/m3 PU max. 16 bar QA 400Z100-160 Flow meters For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 400 m3/h, measuring range: 32-650 m3/h(b) Intermediate flange DN 100, E1: 1 pulse/m3, E200: 187.5 pulses/m3 PU max. 16 bar
Flow meter For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 40 m3/h, measuring range: 3.3-65 m3/h(b), Rp internal thread, DN 25, E1: 10 pulses/m3, E200: 500 pulses/m3 pu max. 4 bar, for gas and air Stat. Warennummer 90281000 Ursprungsland: SK
QA 40R25-40

Kromschröder
Flow meter For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 40 m3/h, measuring range: 3.3-65 m3/h(b), Rp internal thread, DN 25, E1: 10 pulses/m3, E200: 500 pulses/m3 pu max. 4 bar, for gas and air Stat. Warennummer 90281000 Ursprungsland: SK
Flow meter For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 400 m3/h, measuring range: 32-650 m3/h(b) Intermediate flange DN 100, E1: 1 pulse/m3, E200: 187.5 pulses/m3 pu max. 16 bar Stat. Warennummer
QA 400Z100-160

Kromschröder
Flow meter For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 400 m3/h, measuring range: 32-650 m3/h(b) Intermediate flange DN 100, E1: 1 pulse/m3, E200: 187.5 pulses/m3 pu max. 16 bar Stat. Warennummer
flow meter For non-calibration gas quantity measurement, display of consumed quantity, with pulse generators E1 and E200 Nominal flow rate: 250 m3/h measuring range 20-400 m3/h(b) intermediate flange DN 100, E1: 1 Imp/m3, E200: 187.5 Imp/m3 pu max. 4 bar, for gas and air QA 250Z100-40 flow meter For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 250 m3/h, measuring range: 20-400 m3/h(b) Intermediate flange DN 100, E1: 1 pulse/m3, E200: 187.5 pulses/m3 pu max. 4 bar, for gas and air
QA 250Z100-40

Kromschröder
flow meter For non-calibration gas quantity measurement, display of consumed quantity, with pulse generators E1 and E200 Nominal flow rate: 250 m3/h measuring range 20-400 m3/h(b) intermediate flange DN 100, E1: 1 Imp/m3, E200: 187.5 Imp/m3 pu max. 4 bar, for gas and air QA 250Z100-40 flow meter For metering gas where no calibration is required, display of the quantity consumed, with E1 and E200 pulse generators Nominal flow rate: 250 m3/h, measuring range: 20-400 m3/h(b) Intermediate flange DN 100, E1: 1 pulse/m3, E200: 187.5 pulses/m3 pu max. 4 bar, for gas and air
Flow meter with electronic counter header For non-calibratable gas metering, display of consumed quantity, key date value, key date, instantaneous flow and High resolution of the amount consumed, with a pulser E200 Nominal flow: 250 m3/h Measuring range 20-400 m3/h(b) intermediate flange DN 100, E200: 187.5 imp/m3 pu max. 4 bar, for gas and air Interface for M-Bus QAE 250Z100-40 Flow meter with electronic counter head For metering gas where no calibration is required, display of the quantity consumed, key date value, key date, current flow guess and high resolution of the quantity consumed, with E200 pulse generator Nominal flow rate: 250 m3/h, measuring range: 20-400 m3/h(b) Intermediate flange DN 100, E200: 187.5 pulses/m3 pu max. 4 bar, for gas and air M-Bus interface
QAe 250Z100-40

Kromschröder
Flow meter with electronic counter header For non-calibratable gas metering, display of consumed quantity, key date value, key date, instantaneous flow and High resolution of the amount consumed, with a pulser E200 Nominal flow: 250 m3/h Measuring range 20-400 m3/h(b) intermediate flange DN 100, E200: 187.5 imp/m3 pu max. 4 bar, for gas and air Interface for M-Bus QAE 250Z100-40 Flow meter with electronic counter head For metering gas where no calibration is required, display of the quantity consumed, key date value, key date, current flow guess and high resolution of the quantity consumed, with E200 pulse generator Nominal flow rate: 250 m3/h, measuring range: 20-400 m3/h(b) Intermediate flange DN 100, E200: 187.5 pulses/m3 pu max. 4 bar, for gas and air M-Bus interface
Flat gasket 1/2" for pressure gauges CU version
03110621

Kromschröder
Flat gasket 1/2" for pressure gauges CU version
flange mounting kit Nominal width: DN 65 /PN 16 according to DIN 30690-1 and DVGW Information G19 consisting of: 1 piece Refalit - gas seal, incl. WAZ HTB approval according to VP 401 up to 5 bar HTB approved including marking 4 hexagonal screws, nuts M16, 6 washers, hardened hardness class 200 HV and 2 serrated lock washers, DIN 6798, incl. recommended tightening torques calculated according to DIN 30690_1 Stat. Commodity number: 9032900
FMS 065-16

Kromschröder
flange mounting kit Nominal width: DN 65 /PN 16 according to DIN 30690-1 and DVGW Information G19 consisting of: 1 piece Refalit - gas seal, incl. WAZ HTB approval according to VP 401 up to 5 bar HTB approved including marking 4 hexagonal screws, nuts M16, 6 washers, hardened hardness class 200 HV and 2 serrated lock washers, DIN 6798, incl. recommended tightening torques calculated according to DIN 30690_1 Stat. Commodity number: 9032900
Flame Warden Within the scope of European directives, this product only used for substitute purposes. For flame signaling or for Multi-flame control with PFS/PFD Series 700 For intermittent operation, ionization or UV monitoring With 4 independent flame monitors Switchable from 220/240 V~ to 110/120 V~, 50/60 Hz, for grounded or floating networks
PFF 704T/N

Kromschröder
Flame Warden Within the scope of European directives, this product only used for substitute purposes. For flame signaling or for Multi-flame control with PFS/PFD Series 700 For intermittent operation, ionization or UV monitoring With 4 independent flame monitors Switchable from 220/240 V~ to 110/120 V~, 50/60 Hz, for grounded or floating networks
fine adjustment valve To supplement valVario routes or as a single product Size: 1 Inlet: DN 15 (1/2'') Outlet: DN 15 (1/2'') Pipe connection: Rp internal thread Inlet pressure: pu max. 500 mbar (7 psig) Housing type: Basic (no accessories possible) Accessories above: screw plugs
VMV 115R05P

Kromschröder
fine adjustment valve To supplement valVario routes or as a single product Size: 1 Inlet: DN 15 (1/2'') Outlet: DN 15 (1/2'') Pipe connection: Rp internal thread Inlet pressure: pu max. 500 mbar (7 psig) Housing type: Basic (no accessories possible) Accessories above: screw plugs
Find VA2 /B
74921998

Kromschröder
Find VA2 /B
Feder 55-75 mbar, blau Feder (blau) für GBF 40, VGBF 25-40 (55-75 mbar) and VAR 25-40 (56-70 mbar) für Ausgangsdruck-Umstellungen: für GBF 40, VGBF 25 und VGBF 40, Ausgangsdruckbereich 55 - 75 mbar für VAR 25 und VAR 40, Ausgangsdruckbereich 56 - 70 mbar
75422000

Kromschröder
Feder 55-75 mbar, blau Feder (blau) für GBF 40, VGBF 25-40 (55-75 mbar) and VAR 25-40 (56-70 mbar) für Ausgangsdruck-Umstellungen: für GBF 40, VGBF 25 und VGBF 40, Ausgangsdruckbereich 55 - 75 mbar für VAR 25 und VAR 40, Ausgangsdruckbereich 56 - 70 mbar