hotrod® 10x50 315W 230V
Hotset
Item No. MIWG25008D
- hotrod® type HHP 10 mm (-0.02/-0.06 mm) x 50 mm (1/-1 mm) 315W (31.5/-31.5 W) 230V
- Sheath material: 1.4541
- 1000 mm lead-out GLS-insulated Ni-cables (max. 320°C)
Diameter: 10.00mm
Length: 55.00mm
Power: 315.00 watts
Voltage: 230.00 volts
Connection length: 1000 mm
This cartridge heater, designed according to your wishes, is an extreme design.
The life expectancy of this heating element depends to a large extent on the
Installation situation in your application.
In the case of unfavorable installation conditions (e.g. too large a fit) and too high
operating temperatures, the service life may be severely limited!
We therefore strongly recommend that you carry out your own tests with regard to the service life and behavior of the
perform heating cartridge.
The following conditions must be met when using this heating element as intended
at least be complied with:
The surface temperature of this heating element must not exceed 700 °C.
A press fit is to be provided.
The controlled system should be short, i.e. an external temperature sensor must be close to the
heating element are placed.