Fluid O Tech
Fluid O Techunser Kunde sucht eine geeignete Pumpe: Es sollte für den Dauereinsatz von Chemikalien wie Heizöl, AdBlue etc. geeignet sein. Durchfluss (Druckbereich etc.) Kennlinien und Grafiken (Pumpenkurven) des jeweiligen Modells können sie uns wenn verfügbar Model vorschlagen mit Datenblatt.
Fluid O TechSpecial motor 640W 1AC230V50Hz(16) IP55 n=1250 4.6A CLF TS #110238.17
Fluid O TechSpecial motor 550W 1AC230V50Hz(14)IP55 n=1360 4.2A CLF TS #110827.02 with two cable glands PG9
Fluid O TechSondermotor 640W 1AC230V50Hz(16) IP55 n=1250 4.6A CLF TS #110238.17
Fluid O TechS/N: 2L6FS
Fluid O TechROTOFLOW" rotary vane pump, brass, By-pass, NSF, G 3/8"
Fluid O TechRotary vane pump stainless steel Integral motor+control 1AC230V50/60Hz
Fluid O TechRepair kit for MG/FG409 ceramic/ceramic PEEK/PTFE consisting of: set of shafts+gears(9), set of bearing bushes(6), set of housing seals(4,10) Use: spare parts for pump marked FG409XDOCT10000
Fluid O Techmotor und komplett
Fluid O TechMINI gear pump 316/PTFE connections in line
Fluid O TechMINI gear pump 316/PEEK/PVDF, without bypass connections in line. O-rings PTFE Corresponds to the item code on the pump MK313XE0PT00000 + additional Conversion of the pump to elastomer silicone
Fluid O TechMINI gear pump 316/PEEK/PTFE Connections 1/8" in line MGC11 Drive 24 VDC n=3100 consisting of: MG-GM42x30I, MGA05, MG-60380-R1
Fluid O TechMGK317XPS07T MINI gear pump 316 / PEEK / PTFE, without bypass Connections in line. O-rings PTFE + MGCK11S-24 Motor + attachments, consisting of: Motor 24VDC, 50W, n = 3300, lantern, magnet "rare earth
Fluid O TechConnection : 3/8” , TechPA401 rotoflow high pressure pump
Fluid O TechAll: Flow rate: 10-15 LPM Pressure : 4-5 bar Voltage: 220V Pumps should operate at an average pressure of 4-5 bar between 10-15 LPM flow rate. Average values are provided in the working graphs of the models I have mentioned above. For this reason, I ask you to pay attention to this criterion in the other options you will offer.