"Erichsen" markasına ait modeller;
One-blade device 295/XIII with folding ruler Ergonomically optimized, triangular design with handle and 5 swiveling rulers of 1 mm, 2 mm and 3 mm thickness for cross-cut tests according to EN ISO, ISO, ASTM, JIS, BS, NF, SNV, EN and VDA, incl. magnifying glass, polyamide bristle brush and plastic case, incl. manufacturer's test certificate M
00191331

Erichsen
One-blade device 295/XIII with folding ruler Ergonomically optimized, triangular design with handle and 5 swiveling rulers of 1 mm, 2 mm and 3 mm thickness for cross-cut tests according to EN ISO, ISO, ASTM, JIS, BS, NF, SNV, EN and VDA, incl. magnifying glass, polyamide bristle brush and plastic case, incl. manufacturer's test certificate M
One-blade device 295/XII with folding ruler each with 10 swiveling rulers of 1 mm and 1.5 mm thickness, for cross cut tests according to EN ISO, ISO, ASTM, JIS, BS, NF. SNV, EN, VDA and Daimler Benz (1.5 mm), incl. magnifying glass, Polyamide bristle brush and plastic case, incl. manufacturer's test certificate M
00191231

Erichsen
One-blade device 295/XII with folding ruler each with 10 swiveling rulers of 1 mm and 1.5 mm thickness, for cross cut tests according to EN ISO, ISO, ASTM, JIS, BS, NF. SNV, EN, VDA and Daimler Benz (1.5 mm), incl. magnifying glass, Polyamide bristle brush and plastic case, incl. manufacturer's test certificate M
One-blade device 295/III with folding ruler with 10 swiveling rulers, each 1 mm thick, for cross cut tests according to EN ISO, ISO, ASTM, JIS, BS, NF, SNV, EN and VDA, incl. magnifying glass, Polyamide bristle brush and plastic case, incl. manufacturer's test certificate M
00190331

Erichsen
One-blade device 295/III with folding ruler with 10 swiveling rulers, each 1 mm thick, for cross cut tests according to EN ISO, ISO, ASTM, JIS, BS, NF, SNV, EN and VDA, incl. magnifying glass, Polyamide bristle brush and plastic case, incl. manufacturer's test certificate M
Multi-blade device 295/II with 6 cutting edges and cutting distance 2 mm for cross-cut tests according to EN ISO, ISO, ASTM, JIS and VDA, including magnifying glass, polyamide bristle brush and plastic case, including manufacturer test certificate M
00190231

Erichsen
Multi-blade device 295/II with 6 cutting edges and cutting distance 2 mm for cross-cut tests according to EN ISO, ISO, ASTM, JIS and VDA, including magnifying glass, polyamide bristle brush and plastic case, including manufacturer test certificate M
Multi-blade device 295/I with 6 cutting edges and cutting distance 1 mm for cross-cut tests according to EN ISO, ISO, VDA and EN, including magnifying glass, Polyamide bristle brush and plastic case, including manufacturer test certificate M
00190131

Erichsen
Multi-blade device 295/I with 6 cutting edges and cutting distance 1 mm for cross-cut tests according to EN ISO, ISO, VDA and EN, including magnifying glass, Polyamide bristle brush and plastic case, including manufacturer test certificate M
Microcontroller-controlled film drawing and drying tester with 400 mm application path, with freely adjustable film drawing speed in the range of 0.1 - 19.9 / 20 - 100 mm / s and Freely adjustable dryness test time in the range of 0.1 - 19.9 / 20 - 108 min / cm, with integrated ejector (vacuum generator), including collecting tray. Power connection: 100 - 240 V, 50/60 Hz via wide-range power supply
Film drawing and drying tester COATMASTER 510

Erichsen
Microcontroller-controlled film drawing and drying tester with 400 mm application path, with freely adjustable film drawing speed in the range of 0.1 - 19.9 / 20 - 100 mm / s and Freely adjustable dryness test time in the range of 0.1 - 19.9 / 20 - 108 min / cm, with integrated ejector (vacuum generator), including collecting tray. Power connection: 100 - 240 V, 50/60 Hz via wide-range power supply
Manufacturer's test certificate M according to DIN 55 350, part 18, including verification and calibration/recalibration for Stone chip tester MULTI GRIT TESTER 508 VDA/508 SAE
16298032

Erichsen
Manufacturer's test certificate M according to DIN 55 350, part 18, including verification and calibration/recalibration for Stone chip tester MULTI GRIT TESTER 508 VDA/508 SAE
Manufacturer's test certificate M according to DIN 55 350, part 18, including verification and calibration/recalibration for Hardness test rod 318/318 S/318 C (3 springs and 1 test tip)
16293332 (Optional)

Erichsen
Manufacturer's test certificate M according to DIN 55 350, part 18, including verification and calibration/recalibration for Hardness test rod 318/318 S/318 C (3 springs and 1 test tip)
Manufacturer's test certificate M according to DIN 55 350, part 18, including verification and calibration/recalibration for Coating Thickness Gauge PAINT BORER 518 USB with 1 drill
16298332

Erichsen
Manufacturer's test certificate M according to DIN 55 350, part 18, including verification and calibration/recalibration for Coating Thickness Gauge PAINT BORER 518 USB with 1 drill
Manufacturer's test certificate M according to DIN 55 350, part 18, including checking and calibration / recalibration for COATMASTER 510/510-Basic Note: Any accessories required must also be ordered as required.***
16298132 (optional)

Erichsen
Manufacturer's test certificate M according to DIN 55 350, part 18, including checking and calibration / recalibration for COATMASTER 510/510-Basic Note: Any accessories required must also be ordered as required.***
Manufacturer test certificate M according to DIN 55 350, part 18, including inspection and calibration/recalibration for cutting bodies (Mod. 295)
16292432

Erichsen
Manufacturer test certificate M according to DIN 55 350, part 18, including inspection and calibration/recalibration for cutting bodies (Mod. 295)
LOAD CELL 2.5KN
0226.10.31

Erichsen
LOAD CELL 2.5KN
High-pressure hose line / 1.5 m
05730232

Erichsen
High-pressure hose line / 1.5 m

High-pressure hose line / 0.63 m
05730132 (Alternative)

Erichsen
High-pressure hose line / 0.63 m
Force gauge, model 833 - 2.5 kN with manufacturer test certificate M equipped with throttle as standard
02240131

Erichsen
Force gauge, model 833 - 2.5 kN with manufacturer test certificate M equipped with throttle as standard
for thickness measurement of organic coatings on all Substrates according to the wedge-cut method, with rotatable and laterally movable microscope for measuring ellipsoidal drill holes. The scope of delivery includes: Drill 5 for layer thicknesses up to 300 μm (scale factor 3 μm/section, cutting angle 8.5°), 2 felt-tip pens (black/silver), screwdriver, rechargeable battery (9 volts), plug-in power supply (100 - 240 VAC, 47 - 63 Hz) and plastic case; without manufacturer test certificate.
PAINT BORER 518 MC

Erichsen
for thickness measurement of organic coatings on all Substrates according to the wedge-cut method, with rotatable and laterally movable microscope for measuring ellipsoidal drill holes. The scope of delivery includes: Drill 5 for layer thicknesses up to 300 μm (scale factor 3 μm/section, cutting angle 8.5°), 2 felt-tip pens (black/silver), screwdriver, rechargeable battery (9 volts), plug-in power supply (100 - 240 VAC, 47 - 63 Hz) and plastic case; without manufacturer test certificate.
extern Serial Nr. 140804 + external load cell 906 USB 500N Serial Nr. 1209 + Global spring
Physimeter 906 USB

Erichsen
extern Serial Nr. 140804 + external load cell 906 USB 500N Serial Nr. 1209 + Global spring
Drill 5 (spare) Made of solid carbide with double-edge geometry for layer thicknesses up to 300 µm (scale factor 3 µm/skt., cutting angle 8.5°)
910928241

Erichsen
Drill 5 (spare) Made of solid carbide with double-edge geometry for layer thicknesses up to 300 µm (scale factor 3 µm/skt., cutting angle 8.5°)
Drill 4 Made of solid carbide with double-edge geometry for layer thicknesses up to 500 µm (scale factor 5 µm/skt., cutting angle 14°)
910927741

Erichsen
Drill 4 Made of solid carbide with double-edge geometry for layer thicknesses up to 500 µm (scale factor 5 µm/skt., cutting angle 14°)
Drill 3 Made of solid carbide with double-edge geometry for layer thicknesses up to 1000 µm (scale factor 10 µm/skt., cutting angle 26.7°)
910927841

Erichsen
Drill 3 Made of solid carbide with double-edge geometry for layer thicknesses up to 1000 µm (scale factor 10 µm/skt., cutting angle 26.7°)