Magnetic Level Gauge Type BNA-SA1
BNA-EN50/40/B1-MG-M700-V60x2-MRA-1/M-ZVSS225/PN25/R48H
Pressure: 16 bar ; Temp.: -10°C...200°C; Fluid density: 800 kg/m³
Design code: PED 2014/68/EU (AD2000)
Classification to PED 2014/68/EU: Category I, Module A, Fluid Group
1
Test pressure: 27 bar
Chamber dimensions: OD 60.3 x 2 mm Stainless steel 316Ti (EN
1.4571)
Process connection: Flange DIN EN 1092-1 DN 50 PN 40 Form B1
Distance C-to-C: 700 mm
Measuring range: 700 mm
Chamber end top: Pipe cap
Chamber end bottom: Flange KSR size OD 130 mm
Vent connection: Vent plug 1/2"BSP
Drain connection: Drain plug 1/2"BSP
Float: ZVSS225/PN25/R48H
Level indicator: BMD-SA, aluminium housing with plastic rollers
Dampening element: Dampening spring, bottom, with cover
Gasket(s): Sigraflex Universal Pro
Bolting: M series, stainless steel 316 (1.4404 / A4-70)
Top stand-off (T): 100 mm
Bottom stand-off (U): 200 mm
Distance lower process connection to end of the drain: 260 mm
(max.)
Side distance (X): 170 mm (maximal)
Nameplate: Aluminium laser printed
Weight: 14.5 kg
BGU-1 Sil
Magnetic Switch for Magnetic Level Gauge BGU-S
Basic type: BGU-S, reed, aluminium case, cable outlet
max. AC 230V; 40VA; 1A / DC 230V; 20W; 0.5A
Number of switches: 1
Electrical connection: Cable silicone 1 m
Process temperature -50°C up to 180°C
Ingress protection: IP66
MG-AVK5/MT/T15-L850/M700/14
Magnetic Level Transmitter for Magnetic Level Gauge Type BLR-SB
Thermal protection: 3mm Microtherm
Material: Stainless steel 316Ti (EN 1.4571)
Housing: Aluminium IP66/68 M20 x 1.5 mm with cable gland
LCD display: Without
Head mounted transmitter: T15.HZ - 2 wire, standard
Output signal: 4-20 mA
Housing location: Top mounted angled
100% level position (L1): 0 mm
0% level position: 0 mm
Measuring range: 700 mm
Sensor tube length: 850 mm
Contact separation: 5 mm
Housing extension: 100 mm
